Cationic Poly Electrolyte Powder (RXFLOC 200) Manufacturer, Exporter, Distributor, Supplier in MUMBAI, MAHARASHTRA.

MUMBAI CHEMICAL is leading one Largest Supplier, Manufacturer and Exporter of Cationic Poly Electrolyte Powder (RXFLOC 200) in Maharashtra, Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli.

Product Information:
Cationic Poly Electrolyte Powder (RXFLOC 200) :RXSOL-40-4061-025
The RXFLOC 200 Cationic Poly Electrolyte is utilized for dewatering organic slush from human waste, sewage and industrial effluents. This powdered form flocculant is formulated by making use of finest quality polyacrylic ester to ensure exceptional treatment effects in the combination of inorganic flocullants. By neutralizing the electric charge of sludge particles, these electrolytes promote flocculation effectively.

Product Application:
It is appreciated for unmatched features like exceptional floc formation, superior cleaning performance, quick settling, improvised filter clarity, high filtration capacity, fully miscible in water and competent in filter cake washing. RXFLOC 200 is organic based powder  suitably utilized in industrial waste water treatment, sewage treatment, paper making, petroleum, and metallurgy industries for clarification, sludge thickening, sludge dewatering and water recovery processes.

Using Procedure:
RXFLOC 200 dose as below for  solid-liquid separation process:
Belt filter, centrifuge, screw press dewatering- increased production rate, cake solids and solids capture.
Water clarification – improves influent, process and effluent water quality by reducing suspended solids and turbidity.
Dissolved air flotation – result in cleaner subnatants, increased float solids and greater throughput.
Filtration – improve filtered water quality and plant throughput.
The above are the primary applications for this product. This product may be beneficial in any solid-liquid separation process.
RXFLOC 200 Cationic Polyelectrolyte Powder dry PAM cationic flocculants should be properly dipersed and dissolved to 0.1-0.5% concentration. Dissolution should be completed around 1 hour of agitation, but will be faster in warm water. However, the temperature of watershould be refrained from above 50 degree C.

Treatment Levels (for use as ):
Air Flotation Flocculants : 0.1~ 5.0 ppm
Thickening Flocculants   : 0.1~ 5.0 ppm
Dewatering Flocculants  : 0.1~ 1.0 ppm

Product Note:
Features and Benefits :

• Economical to use-effective at very low dosage levels.
• Perform well over a wide pH range.
• Improve throughput and cake solids.
• Achieve high solids capture.
• Easily sealable in water.
• Dry product minimizes storage requirement.

Handling :  Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage : RXFLOC 200 Cationic Polyelectrolyte should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight.

Product Technical Specification:

Physical Form	Granular Powder
Color	White
Odor	None
Freezing/Melting Point	Not determined
Solubility in water	Soluble, solubility limited by viscosity
Vapor Density	Not applicable
Vapor Pressure	Not applicable
Density	Not determined
Specific Gravity	0.8 – 1
pH	~ 3.3 (1 % solution)
Percent Volatile	None expected above trace levels
VOC	Not applicable
Partition Coefficient(Octan/Water)	Not determined
Decomposition Temperature	Not determined
Flammability Limits in Air	Not determined
Flash point	Not applicable
Test Method (for Flash Point)	Not applicable

Available Packing Size: 25 Kg (PWD)

MUMBAI CHEMICAL offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical. Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Cationic Poly Electrolyte Powder (RXFLOC 200) with advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers. Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping a ready stock of Cationic Poly Electrolyte Powder (RXFLOC 200) and for more information, any support and price, Feel free to contact us through our Email id mumbaichems @ gmail.com

We are presently operative in all over India and you can buy our products from various location Like Andhra Pradesh, Tamil nadu, Gujarat , West Bengal  and also all seaports of India. We do have many satisfied customers in this Industries because of our QUALITY, PRICING & SERVICE. Our Company is also a Major Exporter & Mfg of Cationic Poly Electrolyte Powder (RXFLOC 200) in UAE, Oman , Vietnam, Europe, Africa, Bahrain, Qatar, Africa & many more countries.

Supply Locations :
Maharashtra , Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli, All over Maharashtra.