COAL REMOVER rx hold Manufacturer, Exporter, Distributor, Supplier in MUMBAI, MAHARASHTRA.
Thursday, October 29, 2020 Category: UncategorizedMUMBAI CHEMICAL is leading one Largest Supplier, Manufacturer and Exporter of COAL REMOVER rx hold in Maharashtra, Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli.
Product Information:
COAL REMOVER rx hold 210 Ltr : RXSOL-22-2215-210
A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.
It is free from hydrocarbon solvents, non flammable and biodegradable.
Biodegradable / Non-Toxic / Non-Pollutant.
VERY Cost effective.
Recommended to use spray equipment.
The use of hot water will greatly enhance the effectiveness of the cleaning and should be utilized whenever possible.
Product Application:
Use cold – no heating required.
Easily dissolves deposits containing carbon , polymer resin etc.
Economical to use.
Scraping not required.
Non- flammable.
Helpful for burner tips, fuel injectors and all components fouled by carbon, resin or varnishes.
Cleans oil side of fuel heaters, oil coolers, etc.
Can be used for cleaning of : -Fuel Oil Filters – Pistons – Piston rings – Valve cage
Using Procedure:
Directions for Use and Dose Rates
Soak Method:-
It may be used concentrated or diluted with water, depending on the degree of contamination, the surface area to be treated, the desired degree of cleaning and the available downtime. Actually, the user is the best one capable to regulate the quantity and concentration to be used for the situation at hand. In any case, when the accumulation is not heavy, a 50% solution with water must be used. Otherwise,RXSOL-22-2201. can be used undiluted especially when deposition is heavy and hard spots persist.
Cleaning Procedure
Conventional cleaning methods such as a brush, hard sponge, thick and hard broom and /or a mop can be used on heavy duty and hard stain deposits. Note that for heavy accumulations the cleaning procedure might be necessary to be repeated until the results are satisfactory. Furthermore, it is important to keep in mind that 1 litre of RXSOL-22-2201 is sufficient to cover a surface area of 8-10 square meters.
NOTE : Let this product soak into the surface for 30-45 minutes. Then using a high-powered spray washer blast the surfaces until the stains and discoloration is gone.
Product Note:
Cleaning time will vary depending on the exact nature and thickness of deposit to be removed.
Stubborn deposits should be scrubbed to assist the cleaning operation.
Your local Rx CLEANSERS representative will work with you to design the optimum concentration & procedure for your system.
RXSOL-22-2201 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-22-2201 it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alkalinity Control in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.
Product Technical Specification:
Available Packing Size: 210 Ltr.
MUMBAI CHEMICAL offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical. Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of COAL REMOVER rx hold with advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers. Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping a ready stock of COAL REMOVER rx hold for more information, any support and price, Feel free to contact us through our Email id mumbaichems @ gmail.com
We are presently operative in all over India and you can buy our products from various location Like Andhra Pradesh, Tamil nadu, Gujarat , West Bengal and also all seaports of India. We do have many satisfied customers in this Industries because of our QUALITY, PRICING & SERVICE. Our Company is also a Major Exporter & Mfg of COAL REMOVER rx hold in UAE, Oman , Vietnam, Europe, Africa, Bahrain, Qatar, Africa & many more countries.
Supply Locations :
Maharashtra , Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli, All over Maharashtra.
Request for Quote and Get Heavy Discount on Price
Related Posts:
Cobalt sulfate – Manufacturer, Exporter, Distributor and Supplier in Mumbai India
Mumbai Chemical industry Based in Mumbai India. Mumbai chemical are...
Sodium Acetate manufacturer
Sodium Acetate manufacturer Welcome to RXSOL. – the manufacturer of...
Heavy Duty Cleaner Manufacturer, Exporter, Distributor, Supplier in MUMBAI, MAHARASHTRA.
MUMBAI CHEMICAL is leading one Largest Supplier, Manufacturer and Exporter...