Drain Pipe Cleaner Manufacturer, Exporter, Distributor, Supplier in MUMBAI, MAHARASHTRA.

MUMBAI CHEMICAL is leading one Largest Supplier, Manufacturer and Exporter of Drain Pipe Cleaner in Maharashtra, Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli.

Product Information:
Drain Pipe Cleaner :RXSOL-16-1057-025
Specially designed to rapidly break pipes to restore flow and clear blockages. Heavy DUTY and fast effective Descaler for any type of metal (except for soft metal like aluminium and zinc). This scales remover for sewage pipe lines and evac systems . It contains special inhibitors to make its after on most metals, concrete and plastic surfaces. Drain Blaster cuts down the need to plumb or rod, or excavate when the build-ups occur.

Directions for Use and Dose Rates :-
The most effective method is circulation for large systems or components likeboilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60°C, for 6-12 hours and solutions of 10-40% of Drain Scale Remover in water. Keep in mind that the strength of the solution is analogous to the degree of  deposition of scale .
In case of small components , the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all  clean the system with  RXSOL OB 1005.
Drain Scale Remover  should be mixed with fresh water  to form a  solution  of  10-30%, depending  on  the extent of scaling.
After using Drain Scale Remover  it  is essential to  thoroughly  rinse all metal surfaces at least once   with  a 0.5% solution of  Alakleen Liquid or Liquid Soap in  fresh  water.  This  solution  should  be  circulated for 2-4   hours  or  until  an acceptable pH value is obtained. This  will  neutralize any remaining acidity  &  passivate  steel  surfaces. Drain Scale Remover should not be used  on  Aluminium, Zinc, Tin,  or  any  Galvanized  Surfaces  for  which  a special grade cleaner should be used.

Product Application:

• Scales remover for sewage pipe lines and evac systems.
• Drain cleaner will remove: lime scale, rust deposits and organic obstructions.
• Rapidly breaks down organic deposits and paper from drains and waste pipes.
• Generates heat on dilution to soften fat and grease.
• Heavier than water, flowing around the waste tap to the source of restriction.
• Restores flow and clears blockages.
• Usefull for clearing of blocked drains, sinks, toilets & urinals.
• Its Higher concentration quickly dissolves organic obstructions, such as grease, hair, textiles, sludge, soap etc
• Removes lime scale & rust deposits.

Using Procedure:
A plumbing detergent designed to dissolve clogs pipes. Dissolves everything except glass or metal without damaging the piping.
1.Carefully and slowly pour into the drain (do not add water to the product).
2.Allow to stand for up to 15 minutes.
3.If the blockage has cleared, carefully flush the pipe work with water. If drainage is slow, repeat the process.

In the event of the blockage not clearing, a drainage engineer/plumber should be contacted. Ensure that they are warned that the drain contains a concentrated acid solution.
DOSE LEVELS
Small drains : 0.25 Litres
3%     4% drains : 1 Litre
6%      8% drains : 2 Litres
Grease Traps : 0.5 – 1 Litre

Product Note:
DIRECTIONS FOR USE

•  For professional use only.
• Read the label and MSDS carefully before use.
• Wear appropriate protective clothing, gloves and eye/face protection.
• DO NOT MIX WITH BLEACH or other cleaning chemicals.
• Do not apply if the toilet/drain is overflowing. Remove excess fluid where appropriate.
• Assess where the likely source of the blockage is. If the drain is totally blocked with no flow and the blockage is too far away, Blockbuster would not be an appropriate treatment and a qualified drainage engineer/plumber should be contacted.

Product Technical Specification:

APPEARANCE	Viscous Liquid
COLOUR	Black
ODOUR	Characteristic/acidic
SOLUBILITY	Completely soluble in water
RELATIVE DENSITY	1.80

Available Packing Size: 500 ml, 1,5, 10, 20, 25, 210 Ltr.

MUMBAI CHEMICAL offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical. Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Drain Pipe Cleaner with advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers. Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping a ready stock of Drain Pipe Cleaner for more information, any support and price, Feel free to contact us through our Email id mumbaichems @ gmail.com

We are presently operative in all over India and you can buy our products from various location Like Andhra Pradesh, Tamil nadu, Gujarat , West Bengal  and also all seaports of India. We do have many satisfied customers in this Industries because of our QUALITY, PRICING & SERVICE. Our Company is also a Major Exporter & Mfg of Drain Pipe Cleaner in UAE, Oman , Vietnam, Europe, Africa, Bahrain, Qatar, Africa & many more countries.

Supply Locations :
Maharashtra , Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli, All over Maharashtra.