Excellent Cleaner for Electric Parts
Electrocleaner
A well balanced blend of non-chlorinated degresol ( Having super Degreasing power ) with surfactants which eliminates Cleaning Degreasing and rust removal from electrical equipment.It provides immediate and efficient removal with a high evaporation rate.
Electrocleaner is a specially formulated cleaning and degreasing agent designed for the maintenance of electrical and electromechanical equipment. It combines high-performance non-chlorinated solvents with selected cleaning agents to provide rapid removal of oil, grease, and accumulated contaminants.
The product penetrates and loosens oily deposits, helping restore clean surfaces on suitable electrical components. Its fast-evaporating solvent system minimizes residual solvent after application, reducing the need for manual wiping on accessible surfaces.
Electrocleaner is suitable for use in industrial maintenance workshops, electrical service facilities, marine applications, and equipment maintenance operations.
RXSOL-16-1093-025 must be used in open or sufficiently ventilated areas. RXSOL-16-1093-025 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1093-025. Never use RXSOL-16-1093-025 on a running generator or motor. RXSOL-16-1093-025 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic . Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.
Where to use ELECTROCLEANER Electrical Parts Cleaner?
- Cleaning suitable motor housings, metal parts, and accessible components during maintenance.
- Removal of oil and dirt from compatible, isolated electrical equipment.
- Cleaning suitable connectors, terminals, relays, and other components after compatibility testing.
- Degreasing suitable electrical and electromechanical parts in ship engine rooms, workshops, and industrial facilities.
Never use RXSOL-16-1093-025 on a running generator or motor.
Never Dilute RXSOL-16-1093-025 with other solvent.
For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment.
Small Parts and components may be cleaned by DIP BATH of RXSOL-16-1093-025
How to clean Electrical Parts easily- remove GREASE, DIRT easily from ELECTRICAL PART?
- Switch off and isolate equipment. Disconnect the power supply, follow lockout/tagout procedures, and verify that the equipment is de-energized.
- Inspect the component. Identify the contaminants and check the compatibility of the cleaner with insulation, plastics, rubber, coatings, and other materials.
- Apply Electrocleaner. Spray or apply a controlled quantity directly onto the contaminated surface using suitable application equipment.
- Allow cleaning action. Let the solvent dissolve and loosen the oil and grease. Use a soft, compatible brush where necessary.
- Remove contamination. Allow loosened contaminants to drain or wipe them away using a clean, lint-free cloth. Avoid spreading dissolved contaminants into sensitive components.
- Allow complete drying. Ensure all solvent has evaporated and fumes have been adequately ventilated before restoring power.
- Inspect before operation. Confirm that the component is clean, dry, and free from residue before returning it to service.
| Product Properties | ||
| Appearance | Clear Colourless Liquid | Vapor Density : Heavier than air |
| Flash Point | 63°C (Closed Cup) | Stabilit Very stable understandard normal conditions |
| Compatibility | ||
|
Metal |
No known effect |
Note: After use the product must always be well sealed in the drum. |
| Packaging | Order No | Size (in kgs./lts.) |
| RXSOL-16-1093-025 | 7/25 Lts | |
Characteristics
- High dissolving and penetration action.
- Excellent degreasing and emulsification power .
- Safe on applied electrical insulation.
- Non-corrosive .It is safe to use on painted or varnished metal surfaces.
- Without chlorinated solvents.
- To be used as an alternative to conventional electric cleaners
Why to use RXSOL ElectroCleaner Electrical Parts Cleaner?
RXSOL ElectroCleaner is an extremely useful alternative for cleaning of electrical parts rather than using hazardous and toxic chemicals.
- Powerful Degreasing Action: Quickly dissolves oil, grease, and oily deposits from suitable electrical components.
- Fast Evaporation: Helps reduce drying time and minimizes downtime during maintenance.
- Non-Chlorinated Formulation: Formulated without chlorinated degreasing solvents.
- Effective Contaminant Removal: Helps remove dirt, oil, and maintenance-related residues.
- Low-Residue Cleaning: Designed to leave minimal solvent residue when used as directed; residue-free performance must be verified.
- Convenient Application: Suitable for spray or controlled application on accessible electrical components.
| Product Name | RXSOL-16-1093-025 |
| Product Type | Electro Cleaner |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Naphtha(petroleum), |
60-100 |
64742-48-9 |
265-150-3 |
65, 66 |
Xn |
|
hydrotreated heavy |
|
|
|
|
|
*See Section 16
|
Odour |
Smells of hydrocarbon |
|
Appearance |
Liquid, colourless, insoluble in water |
|
Contactwith eyes |
Causes irritation |
|
Contact with skin |
Prolonged skin contact will result in defatting of the skin, leading to irritation, and in |
|
Inhalation |
Vapours may cause drowsiness and dizziness (R67), In cases of severe exposure, anaesthesia may develop, In cases of severe exposure, chronic pneumonitis may develop |
|
Ingestion |
The ingestion of significant quantities may cause nausea/vomiting, Harmful: may cause lung.damage if swallowed (R65) |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) |
|
Contact with skin |
Remove contaminated clothing Wash affected area with plenty of soap and water Contaminated clothing should be laundered before reuse Seek medical attention if irritation persists |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes. Irrigate eyes thoroughly whilst lifting eyelids Seek medical attention if irritation persists |
|
Ingestion |
Do not induce vomiting because of risk of aspiration into the lungs. If aspiration is suspected obtain immediate medical attention If vomiting occurs turn patient on side Give water or milk to drinkObtain immediate medical attention. |
|
Inhalation |
Remove patient to fresh air Keep warm and at rest, in a half upright position. Loosen clothing. Seek medical attention if ill effects occur. |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45). |
- Auto-ignition point >200 deg C at 760 mm Hg
- Lower flammability limit 0.6%(in air), Upper flammability limit 7%(in air), Flash point 63 deg C (CC)
- Decomposition products may include carbon oxides
- In case of fire use water spray or fog, alcohol resistant foam, dry chemical or carbon dioxide (S43)
- Vapours are heavier than air and may travel considerable distances to a source of ignition and flashback
- Keep container(s) exposed to fire cool, by spraying with water
|
Personal Precautions |
Wear protective clothing as per section 8. |
|
Environmental Precautions |
Do not allow to enter public sewers and watercourses |
|
Immediate Actions |
Use appropriate containment to avoid environmental contamination (S57). |
|
Clean Up Actions |
Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete. |
|
Special Precautions |
Wear protective clothing as per section 8 Vapours are heavier than air and may travel considerable distances to a source of ignition and flashback Wear suitable respiratory protection. |
|
Handling |
Wear protective clothing as per section 8 During fumigation/spraying wear suitable respiratory equipment (S42) Avoid contact with skin and eyes (S24/25) Eyewash bottles should be available Keep away from sources of ignition - No Smoking (S16). |
|
Storage |
Keep container tightly closed, in a cool, well ventilated place (S3/7/9) Keep away from open flames, hot surfaces and sources of ignition. |
|
Exposure Limits |
TLV (TWA) 275 mg/m3 (White spirit (de-aromatized)). |
|
Exposure controls |
No special ventilation is required unless the product is used in a spray form The undiluted product must not be used in a confined space without good ventilation |
|
Occupational exposure controls |
Wear suitable protective clothing, including eye/face protection and gloves (neoprene or nitrile are recommended) Respiratory protection may be required under exceptional circumstances when excessive air contamination exists Wear approved respirator if exposure likely to exceed MEL/OES |
 |
 |
|
Odour |
Smells of hydrocarbon |
|
Appearance |
Liquid, colourless, insoluble in water |
|
pH |
not applicable |
|
Boiling point |
190 °C to 203 °C at 760 mm /Hg |
|
Vapour pressure |
40 Pa at 20 deg C |
|
Vapour density |
(air = 1) 5.4 |
|
Freezing point |
unknown |
|
Insoluble in water |
|
|
Specific gravity (water=1) |
0.79 |
|
Lower flammability limit |
0.6%(in air) |
|
Upper flammability limit |
7%(in air) |
|
Flash point |
63 deg C (CC) |
|
Auto-ignition point > |
200 deg C at 760 mm Hg |
|
Log Pow |
3.5 - 4.7 |
|
Viscosity |
1.59 cST @ 25 deg C |
- This article is considered stable under normal conditions.
- Avoid overheating, Keep away from naked flames, incandescent or hot surfaces.
|
Toxicological information |
LD50 (oral,rat) >2000 mg/kg.LD50 (dermal) : >2000 mg/kg.LC50 (inhalation) : >5 mg/l/4h |
|
Inhalation |
Inhalation of solvent vapours may give rise to nausea, headaches and dizziness. |
|
Contact with skin |
Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis. |
|
Contact with eyes |
In cases of severe exposure, irritation may develop. |
|
Ingestion |
May cause gastro-intestinal disturbances Aspiration hazard Harmful: may cause lung damage if swallowed (R65). |
|
Carcinogenicity |
No evidence of carcinogenic effects. |
|
Ecotoxicity |
Low toxicity to fish.LC50 (rainbow trout) >1000 mg/l (96 hr).IC50 (algae) >100 mg/l (72 hr) |
|
Mobility |
Insoluble in water. |
|
Persistence and Biodegradability |
Biodegradability 67 % (OECD 301F). |
|
Bioaccumulation Potential |
Low bioaccumulation potential. |
|
Adverse Effects |
No environmental problems are expected when the product is used / handled correctly. In its intended use, the product will not be released into the environment. |
|
Classification |
EU Waste class: 07.01. |
|
Disposal considerations |
Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation |
- Not classified as hazardous for transport
|
Risk Phrases |
Harmful: may cause lung damage if swallowed (R65) Repeated exposure may cause skin dryness or cracking (R66). |
|
Safety Phrases |
Do not breathe vapour/fumes(S23) Avoid contact with skin (S24) Wear suitable gloves and eye/face protection (S37/39) If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label (S62). |
Text of R and S phrase codes used in this safety data sheet:- R65:Harmful: may cause lung damage ifswallowed; R66: Repeated exposure may cause skin dryness or cracking.The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents.The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties. The data given here only applies when product used for proper application(s).The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet Do not use for other.application(s) without seeking advice from manufacturer. This Safety Data Sheet is provided in compliance with The Dangerous Substances Directive This Safety Data Sheet is provided in compliance with The Dangerous Preparations Directive This Safety Data Sheet is provided in compliance with The Safety Data Sheets Directive
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.