What is a Heavy Duty Degreaser?
A Heavy Duty Degreaser (like RXSOL DEGREASER HD) is a powerful alkaline or solvent-based cleaner formulated to remove - Grease, Oil, Carbon residues, Fuel and tar deposits, Heavy dirt and grime
Heavy Duty Degreaser is Excellent for removal of oil and grease. Readily soluble in water in all proportions. It is a unique formulation blended from inorganic, organic compounds and detergents with powerful dispersing agents and aliphatic petroleum distillates. It is non-corrosive to metal like copper, aluminium, mild steel and plastic. It is non-toxic which makes handling easy.
Ideal for use where chlorinated solvents are undesirable or prohibited.
Where You Can Use RXSOL Heavy Duty Degreaser: Engine rooms, Ship decks and bilges, Industrial floors, Workshop equipment, Cargo hold cleaning, Oil-stained concrete and machinery
Complete removal of dirt, oil, carbonised grease, heavy oil , gum, vegetable oil, lube oil, soot, asphalt, carbon stains etc. Gives clear finish to the surface. Excellent for use as a wash for fuel tankers & as a liquid steam jenny compound.
Specialized & Treated for the really tough daily cleaning problems faced in the proper Maintenance of Industrial and Institutional physical plants. Can be used as a stripper for all types of waxes and finishes and as a Degreaser where regular cleaners will not perform. May be brushed on, sprayed or used in a dip tank . Excellent for use as a wash for fuel tankers & as a liquid steam jenny compound.
How to Use RXSOL HEAVY DUTY DEGREASER?
Step-by-Step Instructions:
Dilution (if required):
For heavy contamination: use undiluted or 1:1 with water
For general cleaning: 1:5 to 1:20 (chemical:water) depending on surface and soil level
RXSOL HEAVY DUTY DEGREASER Application Methods:
Spray, brush, or mop directly onto the greasy surface, Can also be applied using a foam gun or pressure washer
Soaking Time:
Allow the degreaser to sit for 5–15 minutes
For thick grease or carbon, give it more dwell time but don’t let it dry
Agitate (Optional):
Scrub with a brush for stubborn areas to enhance effectiveness
Rinse:
Rinse thoroughly with high-pressure water (freshwater or hot water for best results)
Depending upon contamination 2-25% with fresh water.
It is an extremely versatile heavy duty cleaner suitable for use in soak tanks, high pressure washers, Automated Scrubbing machines and for manual use.
RXSOL-10-1005-025 is easily soluble in water Action is quite fast even at low temperature which gives advantages of cleaning under operation And avoid shut down and down time.
Non corrosive to most of the metals / plastics.
Gives clear finish to the surface .
Lower cost due to high concentration
Use undiluted for heavily soiled component
Why Heavy Duty DEGREASER by RXSOL is the BEST CHOICE
RXSOL Heavy Duty Degreaser stands out as a powerful, versatile, and safe cleaning solution for the toughest industrial challenges. Specially engineered with a unique blend of inorganic and organic compounds, advanced detergents, dispersing agents, and aliphatic petroleum distillates, it delivers unmatched performance in removing oil, grease, and stubborn deposits from a wide range of surfaces.
Unlike conventional degreasers, RXSOL Heavy Duty Degreaser is:
- Highly Effective: Cuts through heavy oil and grease quickly, saving time and effort.
- Water Soluble: Readily mixes with water in all proportions, making it easy to apply in different cleaning setups.
- Solvent base: Another variant of RXSOL Heavy Duty Degreaser is solvent base for extremely high penetration and efficient cleaning.
- Surface-Safe: Non-corrosive to metals such as copper, aluminium, mild steel, and safe on plastics—ensuring material protection.
- User-Friendly: Non-toxic and safe to handle, making it suitable for onboard use, workshops, and industrial environments.
Whether used in the marine, industrial, automotive, or manufacturing sector, RXSOL Heavy Duty Degreaser consistently proves to be the reliable, safe, and high-performance choice for professionals who demand the best.
PROEDURE OF USE:-
1st Method:-
Mix 1 part of RXSOL-10-1005-025 with 2 -10 parts of water / GAS-OIL , For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minute of spray the RXSOL-10-1005-025 starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water.
2nd Method:-
Application in immersion process with or without ultrasonic support, manual wipping.
3rd Method:-
RXSOL-10-1005-025 is also used in conjunction with alkaline degreasing bath at 3-5% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70c or the solution can be stirred or air agitated.
Key Features of Degreaser Heavy Duty
- Superior Cleaning Power – Quickly dissolves and removes heavy oil, grease, wax, carbon deposits, and tough hydrocarbon residues.
- Water Soluble in All Proportions – Easily mixes with water, allowing flexible dilution for light to heavy-duty cleaning.
- Dual Action (Solvent + Detergent) – Solvent base penetrates and loosens stubborn residues, while surfactants disperse and emulsify them for easy rinsing.
- Non-Corrosive – Safe on common metals such as mild steel, copper, aluminium, and also compatible with plastics.
- Reduced Manual Effort – Cuts through thick grease layers without excessive scrubbing, saving time and labor.
- Versatile Application – Suitable for spray, brush, soak, or circulation cleaning systems in marine, industrial, automotive, and workshop environments.
- Residue-Free Rinsing – Emulsifies contaminants and rinses away cleanly, leaving surfaces oil-free and ready for use.
- Safe to Handle – Non-toxic formulation ensures safer handling compared to harsh solvent-only degreasers.
- Economical – Concentrated formula offers high coverage area and low consumption per cleaning cycle.
Powerful Emulsifiable Solvent Degreaser with dispersing agents. Readily soluble in water in all proportions. It is non-corrosive to metal like copper, aluminum, mild steel and plastic. It is non-toxic which makes handling easy.
| Product Name | RXSOL-10-1005-025 |
|---|---|
| Product Type | DEGREASER HEAVY DUTY |
Company Details:
RX MARINE INTERNATIONAL105, A wing, BSEL, TECH PARK.VASHI ,NEW BOMBAY 400703 INDIABranch Stock Point ::: Mumbai, Kandla, Chennai - Ennore, visakhapatnam, Kolkata, Fujairah, Muscat, Kenya, Canada
| Phone | +91 22 27815541 / 42 |
|---|---|
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mailto:mail@rxmarine.com |
Chemical characterization : VERY POWERFULL Bio Degradable CLEANER MIXTUREDescription:Mixture contains: Carrier liquid of PETRA ( 20 to 30% ) Along with Linear - Alkyl delivative Emulsifiable products ,Emulsifying agents as surfactants, FattyAcid & alcohal derivative ( biodegradable substance 85 to90%) and Ethoxylate . And with harmless addition.*See Section 16
Human Health Hazards R 36/38 : Causes Irritation / Inhalation may cause headache & dizziness . may cause adverse effects to aquatic environment. Keep away from food, children , animal .
| Inhalation | Supply fresh air on irritation medical attention require & show this MSDS to physician. |
|---|---|
| Skin Contact | In case of contact with skin , wash immediately with plenty of water and soap Remove contaminated clothes. On extra irritation use ointement on Doctor advice. |
| Eye Contact | Flush with running water on open eyelids for at least 15 minutes, Immediately medical attention require. |
| Ingestion | Seek medical attention , don’t try to drink more water / milk because too much water increase the danger of vomiting . ( on vomiting always keep head low to prevent inhalation of airways ) |
| Suitable | Water, Fog or Mist, Alcohol-resistant foam, on small fires dry chemical, carbon dioxide (CO2) also can used. |
|---|---|
| Not Suitable | Alcohol foam / and high pressure of water jet may cause splitting of excess materials. |
| Special | Container close to fire cooled immediately then remove to other place. |
Precaution for fire-fighters Self contained breathing apparatus or apparatus should attached to air supply.
Note:Fired materilas vapours are heavier than air and may travel along the ground for.
| Enviromental Precaution | Direct flow into drainage system, surface or ground water is prohibited |
|---|---|
| Cleaning Method | for preventing the spreading of materials remove spill mechanically or with absorbent materials and dispose of in accordance with section 13.Flush with large amounts of water to clean the area.Ventilate well. Personal: During usage of chemical personal should use all normal protective equipment and avoid contact with eye and skin and for use in close environment personnel should use respiratory breathing apparatus |
Storage Ensure Adequate Ventilation
| Condition to Avoid | Flammable but product is stable under normal condition , take precaution as industrial chemical . |
|---|---|
| Materials to Avoid | Do not subject directly to ALKALINE / Acidic medium. |
| Handling | Keep Container Tightly Closed in the original container and keep away from open flames / ignition sources. |
| Note | Eyewash facilities require at workplace |
The product causes corrosion on skin and mucous membranes GENERALLY Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treatment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 aci- dic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com• Dilute in water (always use plastic jar and RXSOL should be added to water never add water to RXSOL.)
| Product Properties | |
|---|---|
| Respiratory System Protection | Approved respirator must be worn when spraying otherwise normally not required |
| Eye Protection | If there is possibility to contact wear goggles for eye protection |
| Hand protection | Wear PVC chemical resistance protective gloves |
| Other Information | Smoking in store / work area is prohibited. |
| Appearance | Clear brownish liquid | ||
|---|---|---|---|
| Density | g/cm3 at 15°C: 0.89 | ||
| pH | N/A | ||
| Flash PointBoiling point | 90 ºC | ||
|
>210 ºC | ||
| SOLUBILITY | Emulsifiable with water / soluble in most solvents |
Stable under normal condition on access of heat Vapour/gas may form explosive mixtures with air.Hazardous Decomposition Products: No decomposition if stored and used as directed. In FIRE combustion CO, CO2 , NH3 , SOX etc hazardous gas produced.Note : MATERIALS TO AVOID Hydrocarbons and their derivatives may attack certain types of plastic, rubber and pain
| Skin Irritation | Gives irritation may causes dryness. And prolonged contact with skin can cause degreasing effect. |
|---|---|
| Eye Irritat | Cause severe irritation |
| Sensitization | Sensitizing properties not known |
| ChronicToxicity | Not Identified |
| Carcinogencity | Not regulated. ( prolonged inhalation of solvents may cause chronic solvent intoxication. |
RXSOL OB 1005 emulsifies in water and degradable , Toxic to aquatic organism & dangerous for environment but no enviromental problem will create when the product is used correctly . in its intended use the product will not be released into the environment.
As per guide line of local rules and regulation and before disposal and neutralization pl. refer 07 article.
NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF ADG CODE, IMDG OR IATA
| Goods classified for road /rail / | Sea transport | YES with | UN-no | 3082 |
|---|---|---|---|---|
| Proper shipping name | Environmentally hazardous liquid | contains | (Alkyl (C3-C8) Benzenes) | |
| Hazard identification no | 90 Product identification | (UN) no | 3082 | |
| TREMCARD no. | CEFIC | 90G01 | ||
| Marine pollutant | Yes | |||
| Flash point | 90 ºC | |||
| Labelcolour | White./Black. |
Marine pollutant: No
Contains: Aromatic Hydrocarbons, Alkyl (C3-C8)
| R | phrases |
|---|---|
| R | 51/53 Toxic to aquatic organisms/may cause long term adverse effects in the Environment |
| R | 52 Marine Pollutant |
| R | 65 Harmful: May cause lung damage if swallowed |
| S | phrases |
| S | 23 Do not breathe vapour |
| S | 24 Avoid contact with skin |
| S | 60 This material and its container must be disposed of as hazardous waste |
| S | 61Avoid spillage to the environment. Ask for special instructions/safety Datasheet |
| S | 62 If swallowed, do not induce vomiting; seek medical advice immediately |
| S | 36/37/39 Wear suitable protective clothing, gloves and eye/face protection. |
REFERENCES Classified according to European directive on classification of dangerous preparations 90/492/EEC and accordance with EU directive 88/379. .
on the basis of information and experience as well as our present knowledge this guidelines is only safe for handling, use, processing, storage, transport, disposal and discharge; this is not a guarantee or quality of specification. And combination with other products will lost the properties. It is always the responsibility of the user to take all necessary steps to ensure that information given here is read and understood by all who use, handle, dispose of or in any way come in contact with the product. It is not to be considered as a guarantee of the products properties. Disclaim: The information in this MSDS is meant as a description of the safety requirements of our product.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.