RXSOL-10-1002-020 : is a powerful degreaser for engine rooms and fuel cargo tanks . It is non-toxic which makes handling easy . RXSOL-10-1002-020 is mainly breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering.
SELF SPLITTING CLEANER FOR ENGINE ROOM AND BILGES
RXSOL-10-1002-020 is used in combination with multistage bilge water cleaning systems that include mechanical separation of free oil, emulsion breaking, flocculation and filtration. After dosing, Bilge Water Flocculant breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering. It is highly recommended for heavy duty degreasing action .
Typical dose rate: 100 - 500 ppm (0.1 - 0.5 litre/m3 of water)
In a multistage bilge water cleaning system, RXSOL-10-1002-020 is fed undiluted through a dosage pump connected to the pressure side of the oil descaler. The floc tank is fed according to the flow of the bilge water pumped into it. The feed is adjusted in connection with the installation It is highly recommended for heavy duty degreasing action , Depending on contamination 5-25% with fresh water.
The engine room is the heart of any vessel, responsible for the propulsion and essential power systems that keep the ship running smoothly. Proper engine room maintenance is critical to ensuring safety, efficiency, and regulatory compliance. At RXMARINE International, we specialize in providing high-quality marine chemicals that enhance maintenance procedures, keeping vessels in top condition.
Why Engine Room Maintenance Matters
-
Prevents Downtime & Costly Repairs: Regular inspections help detect early signs of wear and tear, reducing expensive breakdowns.
-
Enhances Fuel Efficiency: A well-maintained engine operates efficiently, cutting down fuel consumption and operational costs.
-
Ensures Crew Safety: Proper maintenance minimizes the risk of hazardous incidents such as fires, leaks, or mechanical failures.
-
Regulatory Compliance: Compliance with international maritime regulations (IMO, SOLAS) is essential to avoid fines and ensure smooth sailing.
Key Aspects of Engine Room Maintenance
1. Cleaning & Degreasing
The accumulation of oil, grease, and dirt can lead to overheating and reduced efficiency. Using RXMARINE’s Engine Room Cleaners & Degreasers, you can effectively remove sludge, carbon deposits, and oil residues.
2. Lubrication System Maintenance
-
Regular oil changes using high-quality marine lubricants help prevent friction and wear.
-
Monitoring oil viscosity and contamination is crucial to detect potential engine issues early.
3. Cooling System Efficiency
-
Scale and corrosion in heat exchangers and cooling lines reduce efficiency. Descaling chemicals like RXMARINE’s RXSCALE help prevent blockages and maintain optimal cooling.
-
Ensure coolant levels are checked regularly to prevent overheating.
4. Fuel System Treatment
-
Fuel contamination with water, sludge, and microbial growth can affect engine performance. Using fuel additives and biocides prevents clogging and improves combustion efficiency.
-
Regularly clean fuel injectors and filters to maintain smooth operation.
5. Bilge Cleaning & Oil Spill Management
-
The bilge area accumulates oil and sludge, which can pose environmental and safety hazards.
-
RXMARINE’s Oil Spill Dispersants & Bilge Cleaners effectively break down oil and prevent pollution.
6. Corrosion Prevention
-
Saltwater exposure accelerates corrosion in pipes, tanks, and metal surfaces.
-
Apply corrosion inhibitors and protective coatings to extend the life of engine room components.
Best Practices for Engine Room Maintenance
- Implement a Routine Inspection Schedule – Daily, weekly, and monthly checks help identify problems early.
- Train Crew Members – Ensure engineers and crew are well-trained in maintenance procedures.
- Use High-Quality Marine Chemicals – Investing in premium cleaning, degreasing, and protective products ensures longevity and efficiency.
-
Document Maintenance Activities – Keeping detailed logs helps in audits, repairs, and regulatory compliance.
| Product Name | RXSOL-10-1002-020 |
| Product Type | Bilgo Clean 20 Ltr |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumabi, Kandla, Kolkata, Chennai, Vizag, Fujairah, Muscat, Nairobi
| Phone | +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540 |
| Fax | +91 22 2781 1318 :::AOH :0091 9322594669 |
| mail@rxmarine.com |
Oxidation blowing and chemical reaction of Fatty alcohol derivative, non-ionic surfactants,phosphates , EDTA, potassium hydroxide and remain-ing which is not in the list of hazardous materials .
|
Environmental Hazards |
None ( > 90% INGREDIENTS are bio degradable.) |
|
Human Health Hazards |
Moderates |
|
R 36/38: Irritating to eyes and skin. |
|
|
Inhalation |
Supply or remove to fresh air, Not relevant. |
|
Skin Contact |
Rinse with running water and soap. Remove contaminated clothes. |
|
Eye Contact |
Flush with running water for at least 15 minutes Immediately . |
|
Ingestion |
seek medical attention , try to drink more fresh water. |
| Suitable extinguishing media | Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. |
| Unsuitable extinguishing media | Chromium oxides |
| Special hazards arising from the substance or mixture | Wear self-contained breathing apparatus for firefighting if necessary. |
| Further information | No data available . |
|
Hazardous combustion products |
No data available |
| Advice for firefighters | Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. |
| Protective Equipment | No data available |
| Specific Hazards Arising from the Chemical | No data available |
| Personal precautions, protective equipment and emergency procedures | Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Avoid breathing dust. For personal protection see section 8. |
| Spillage | No data available |
| Personal Protection | Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. Advice for emergency responders: Protective equipment see section 8. |
| Enviromental Precaution | Do not let product enter drains. |
|
Methods and materials for containment and cleaning |
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal. |
| Reference to other sections | For disposal see section 13. |
| Advice on protection against fire and explosion | Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection. |
| Hygiene measures | Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. |
| Advice on safe handling | Avoid contact with skin and eyes. Avoid formation of dust and aerosols |
| Conditions for safe storage, including any incompatibilities | Tightly closed. Dry. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorized persons. Moisture sensitive. |
| Storage conditions | Keep container tightly closed in a dry and well-ventilated place. Keep away from heat and sources of ignition. Keep locked up or in an area accessible only to qualified or authorized persons. |
| Storage class | Storage class (TRGS 510): 13: Non Combustible Solids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Advice on general occupational hygiene | Advice on safe handling Observe label precautions. Change contaminated clothing. Wash hands after working with substance. |
| Exposure controls | Personal protective equipment |
| Control parameters | Ingredients with workplace control parameters |
| Eye/face protection | Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). |
| Body Protection | Impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. |
| Skin protection | Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. |
| Respiratory protection |
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU)).
|
| Other Protection Measure | Handle in accordance with good industrial hygiene and safety practice. |
| Control of environmental exposure | Do not let product enter drains. Risk of explosion. |
|
Product Properties |
|
|
Appearance |
Clear liquid |
|
Density |
In g/cm3 at 20°C: 1.1 |
|
Compatibility |
|
|
Metal |
No known effect |
|
Rubber |
No known effect |
|
pH Flash point |
Alkaline ( 12.5 ) . Not Applicable |
|
Solubility |
100% soluble in water |
| Reactivity | No data available |
| Chemical stability | Stable under recommended storage conditions |
| Possibility of hazardous reactions | No data available |
| Conditions to avoid | No data available |
| Incompatible materials |
Strong oxidizing agents
|
| Hazardous decomposition products | In the event of fire: see section 5 |
| Acute toxicity | Oral: No data available Inhalation: No data available Dermal: No data available |
| Skin corrosion/irritation | Remarks: No data available |
| Serious eye damage/irritation | Remarks: No data available |
| Respiratory or skin sensitization | No data available |
| Carcinogenicity | No data available |
| Germ cell mutagenicity | No data available |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure |
No data available
|
| Additional Information | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| Persistence and degradability | No data available |
| Toxicity to fish | EC50 - Poecilia reticulata (guppy) - 31,9 mg/l - 14 d |
| Toxicity to daphnia and other aquatic invertebrates | static test EC50 - Daphnia magna (Water flea) - 350 mg/l - 48 h (US-EPA) |
| Toxicity | No data available |
| Toxicity to bacteria | EC10 - Bacteria - 14 mg/l - 72 h Remarks: (Lit.) EC5 - E.coli - 15.000 mg/l Remarks: (Lit.) (maximum permissible toxic concentration) |
| Toxicity to algae | static test ErC50 - Pseudokirchneriella subcapitata (green algae) - 240 mg/l - 96 h (US-EPA) |
| potential Bioaccumulative | No data available |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties | No data available |
| Other adverse effects | No data available . |
| Product | No data available |
| Contaminated packaging | No data available |
| Waste treatment Method | No data available. |
| UN number | ADR/RID: IMDG: IATA: |
| UN proper shipping name |
ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA: Not dangerous goods |
| Transport hazard class(es) | ADR/RID: IMDG: IATA: |
| Packaging group | ADR/RID: IMDG:I IATA: |
| Environmental hazards | ADR/RID:No IMDG:No IATA:No |
| Special precautions for user | No data available |
| Further information | No data available |
Classification and labelling according to Chemicals Hazard Information and Packaging Regulations (CHIP).
Symbols of danger :- Xi Irritant
|
R |
phrases |
|
R 36/38 |
Irritating to eyes and skin |
|
S |
phrases |
|
S26 |
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. |
|
S28 |
After contact with skin, wash immediately with plenty of water. |
|
S37/39 |
Wear suitable gloves and eye/face protection. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Authorisations and/or restrictions on use | No data available |
| National legislation | No data available |
| Other regulations | No data available |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International has been advised of the possibility of such damages. |
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.