Petroleum Coke

Petroleum Coke

Application

Dose

Technical specifications

Note

Remarks / Precaution

MSDS

Product Name Petroleum Coke
Product Type RXSOL-81-8117-025

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333 / 5555 / 9999
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

Name  CAS# % by Weight
Marathon Petroleum Coke 64741-79-3  100
Petroleum Coke 64741-79-3 100

 

Inhalation: Excessive dust from powdered material (>5 mg/kg) may cause mild respiratory irritation
Ingestion  Not likely to be toxic by ingestion.
Skin contact

None expected from acute exposure.

Eye contact: Dust may be a mechanical irritant.

Eye Contact

Flush eyes with large amounts of tepid water for at least 15 minutes. If symptoms or irritation occur, call a physician.

Skin Contact

Wash with soap and large amounts of water. If symptoms or irritation occur, call a physician.

Inhalation

If affected, move person to fresh air. If breathing is difficult, administer oxygen. If not breathing or if no heartbeat, give artificial respiration or cardiopulmonary resuscitation (CPR). Immediately call a physician. If symptoms or irritation occur with any exposure, call a physician.
Ingestion Ingestion not likely. If large amounts are swallowed, immediately call a physician.

Suitable extinguishing media For small fires, Class B fire extinguishing media such as CO2, dry chemical, foam (AFFF/ATC) or water spray can be used. For large fires, water spray, fog or foam (AFFF/ATC) can be  used.  Fire   fighting should be attempted only by those  who   are   adequately   trained  and  equipped  with  proper   protective equipment.
Specific hazards This product is neither a f lammable nor  combustible  material, but  will  burn when heated to extremely high temperatures.
Special protective equipment for firefighters Avoid using straight water streams. Water spray and foam (AFFF/ATC) must be applied carefully to avoid frothing and from as far a distance as possible. Keep surrounding area cool with water spray from a  distance   and prevent further   ignition   of   combustible   material.   Avoid   excessive  water  spray application. Keep run-off water out of sewers and water sources.
Flash point >200 F
Autoignition temperature No data available.
Flammable limits in air - lower (%) No data available.
NFPA rating:  
Health  1
Flammability 1
Instability 1
Other -

 NA

 

Handling

Comply with all applicable EPA, OSHA, NFPA and consistent state and local requirements. Use appropriate grounding and bonding practices. Store in properly closed containers that are appropriately labeled and in a cool well-ventilated area. Do not expose to heat, open flames, strong oxidizers or other sources of ignition.

PERSONAL PROTECTIVE EQUIPMENT:

 

Engineering measures

Local or general exhaust required in an enclosed area or when there is inadequate ventilation.

Respiratory protection

Not required under normal conditions and adequate ventilation. Use dust/ fume respirator if use ge


Skin and body protection
Gloves
Eye protection Dust goggles if use produces excessive dust/fume concentrations.

Appearance Black Porous Chunks or Powder
Physical state (Solid/Liquid/Gas) Solid
Substance type (Pure/Mixture) Mixture
Color Black
Odor Slight Hydrocarbon
Molecular weight Not determined.
pH Neutral
Boiling point/range (5-95%) 7600 F
Melting point/range 6300 F
Decomposition temperature Not applicable
Specific gravity 0.8-1.0
Density No data available
Bulk density No data available
Vapor density No data available
Vapor pressure Negligible
Evaporation rate No data available
Solubility Negligible
Solubility in other solvents No data available
Partition coefficient (n-octanol/water) No data available
VOC content(%) No data available
Viscosity No data available.

Stability

The material is stable at 70 F, 760 mm pressure.

Polymerization

Will not occur

Hazardous decomposition products

Carbon monoxide and carbon dioxide, hydrocarbons

Materials to avoid

None known.

Conditions to avoid

Dust can form flammable mixtures in air.

Toxicology Information

 Petroleum coke did not affect fertility or reproductive performance in pregnant female rats exposed to up to 300 mg/m3, 6 hours/day for 28 days although some portal-ofentry mtoxicity (inflamation, discolored lungs and increased lung weight) was observed. Petroleum coke was found not to be carcinogenic in monkeys and rats in a two-year inhalation study at concentrations up to 30 mg/m3. Chronic inflammatory changes similar to those produced by non-specific respiratory irritants were observed in some rats at the highest exposure level. Chronic skin painting studies of coke dust in mice did not produce evidence of carcinogenicity. Petroleum coke (delayed process and fluid process) was found not to be mutagenic in a rat in vivo bone marrow cytogenetic test, a mouse lymphoma assay and an Ames mutagenicity assay.

 

Mobility Not available
Ecotoxicity Not available.
Bioaccummulation Not available.
Persistance/Biodegradation The 48 and 96 hour LL50s for a water accommodated fraction (WAF) of petroleum coke are >1000 mg/l in both daphnia and fathead minnows, respectively. Coke did not produce any adverse effects on fresh water algae at WAF concentrations of >1000 mg/l. Earthworms and seedlings (corn, radish & soybean) were unaffected by the prensence of concentrations of 1000 mg/kg coke in the soil.

Cleanup Considerations

This product as produced is not specifically listed as an EPA RCRA hazardous  waste  accordin  gto f ederal regulations (40 CFR 260-271). However, when discarded, spilled or disposed of, it can become an EPA RCRA hazardous waste. It is the responsibility of the user to determine  if  disposal  material  is  hazardous  according  to  federal, state  and  local regulations.

 NA

 

 NA

 

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.com has been advised of the possibility of such damages. 

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.


 

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@mumbaichemical.com