Highly concentrated water based FOAM cleaner also have exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .
Ideal for difficult cleaning problems faced in industrial and other plants, Very effective degreaser which removes dirt, oil and grease from the equipment, parts, components, engines, floors and walls etc.
Very effective emulsifier - based cleaner for use in hold cleaning and general digressing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution .May be applied by brush, hand spray and by high and low pressure washing machines.
RXSOL is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of metals . It is low toxic product.
3 Pieces of Good Advice:
Apply RXSOL solution on dry surface where possible! A dry surface will absorb far better than a wet surface. When applying RXSOL on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RXSOL may produce "channels" down the surface, thereby running too fast off the surface. During high pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RXSOL will give the best effect .
Applications:-RXSOL Suitable for cleaning of hard surfaces, such as Decks, Tanks, HOLD, etc. can be used for all types of cleaning and degreasing and may be applied by brush, handspray, high and low pressure washing machines etc.
The Importance of HIGH FOAM by High-Pressure Cleaning
The job of high pressure cleaning can be done easier & quicker by simply using RXSOL correct dosages. Using a high pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:
Step 1: Spraying the RXSOL solution over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet.
After the solution has been sprayed on the surface and before the wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the RXSOL thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of RXSOL substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of RXSOL in correct dosages is half the job done.
Heavy Soil deposition Use Undiluted from to 20-50% diluted with water.
Medium soil deposition 10-20% diluted with water.
Light Soil ( general degreasing ) 5-10% diluted with water.
General Cleaning:- This can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on degree of contamination RXSOL should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of RxTuff to a bucket of water. RXSOL solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the RXSOL solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, RxTuff is not recommended for washing machines.
Method of Application and Dose Rates:-
- Direct injection method for pressure washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
- Spot cleaning. Hand spray neat or diluted with up to 5 parts water and leave for several minutes before rinsing off with clean water.
Cleaning of Cargo HOLD Systems:-
- Spray RXSOL on with a high pressure cleaning machine and use 1:6 with water. If used with hand sprayer, spray the product neat onto the surface, allowing 1 lit. for every 12 m2. Use a 5-8% solution in a tank washing machine.
- Leave for about 30-45 minutes. The surface should be kept wet.
- Wash down with hot water (80°C) and check the cargo tank.
- Repeat the procedure if necessary.
Note:- For tuff cleaning spray 10-20 % concentration to the surfaces to be cleaned. Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary.
For degreasing and removal of residues of mimerals oil , coal stain and soot from surface.
Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
Highly concentrated water-based cleaner with exceptional foaming power. Effectively removes oil, grease, dirt, and grime from tough surfaces. Free from hydrocarbon solvents and designed to be safer in handling. Provides quick penetration for fast and efficient cleaning. Can be applied by brush, spray, or high/low pressure washers.
- Heavy-duty degreaser for industrial use
- High foam action for better cleaning coverage
- Biodegradable and safer to use
- Multi-surface cleaner for decks, tanks, engines & more
- Corrosion inhibitors help protect metals
| Product Name | RXSOL-22-3003-025 |
| Product Type | Aqua Clean Break Emulsifier Foam |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujairah, Muscat, Nairobi
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemica Name |
CAS Number |
|
Nonionic Surfactant |
68439-46-3 |
|
Isopropyl Alcohol |
67-63-0 |
|
Proprietory Blend of Detergent Mixture |
|
Odour |
Lemon odor. |
|
Appearance |
Light green liquid. |
|
Contact with eyes |
Primary Entry Routes: Skin and eyes. Signs & Symptoms of Exposure: Direct contact of product with eyes or skin may |
|
Contact with skin |
cause irritation. Prolonged or repeated contact of product with skin and eye may cause redness. If taken |
|
|
|
Contact with skin |
Emergency First Aid Procedures: Wash skin with plenty of water. If irritation persists, seek medical aid |
|
Contact with eyes
|
If eyecontact occurs, flush eyes with water for 15-20 minutes, then get prompt medical aid. If product is swallowed, drink large amounts of water or milk and seek medical aid. |
|
|
|
Normal fire fighting
|
Release or Spill
|
Absorb with diatomaceous earth or similar inert material. Sweep or scrape up and containerize.Rinse affected area thoroughly with water. Wear or use appropriate protective equipment. All Federal, Stateand Local regulations should be carefully followed.
|
|
Handling |
Empty container may contain small amounts of undiluted product. Be certain toDispose of according to all regulations. |
|
Storage
|
Keep out of reach of children. Store in a cool, dry place with adequate ventilation. Keep from freezing. Washthoroughly . |
Gloves Goggles Suit No_Smoking
|
Odour |
Lemon odor |
|
Appearance |
Light green liquid |
|
pH |
(1%): 9.0 - 9.5\ |
|
Boiling point |
212F |
| Solubility in Water |
Complete %Volatile: 99 |
|
Vapour pressure |
Not known |
Stability: Stable
|
N..A |
|
|
After this product's use, it will biodegrade in sewage systems and/or the environment. Contains no phosphates |
|
N.A |
N.A.
N.A
Always follow label directions carefully when using this or any other chemical product. Users are responsible for verifying the data under their own operating conditions to determine whether the product is suitable for their particular purposes. The data contained herein isconfidential and intended solely for the user's internal use.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.