- Consistent concentration
- High ionic conductivity
- Low impurity profile
- Stable alkaline character
- Reliable performance in battery-related systems
- Alkaline battery electrolyte systems
- Industrial battery service applications
- Electrochemical process applications
- Controlled alkaline medium preparation
- Laboratory and technical uses where specified concentration KOH solution is required
| Parameter | Specification |
|---|---|
| Appearance | Clear to slightly hazy liquid |
| Color | Colorless to pale yellow |
| Odor | Odorless |
| pH | Strongly alkaline |
| Potassium Hydroxide Content | 20 - 25% |
| Density at 25°C | 1.20 ± 0.05 g/cm³ |
| Solubility in Water | Completely miscible |
| Conductivity | High |
| Flammability | Non-flammable |
How to measure performance of Electrolyte Liquid
High Conductivity
The potassium hydroxide content supports efficient ionic movement, helping maintain electrochemical performance in suitable battery systems.
Stable Alkalinity
The solution maintains a strongly alkaline medium necessary for applications requiring high pH conditions.
High Purity
Prepared from high-purity potassium hydroxide to reduce contamination risk and unwanted side reactions caused by impurities.
Controlled Density
Density is maintained within 1.20 ± 0.05 to support batch consistency and predictable performance.
Easy Handling in Liquid Form
Supplied as a ready-to-use liquid, reducing dissolution time and handling complexity compared with solid alkali.
| Product Name | Electrolyte Liquid |
| Product Type | RXSOL-16-1024-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Muscat, Nairobi
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
| SARA 313 Component | CAS Number | Percent Comp. | Dimension | Exposure Limits |
| Potassium Hydroxide | 1310-58-3 |
25-36% |
W/V | OSHA PEL 2mg/mƒ |
| Lithium Hydroxide | 1310-65-2 | 0.5-1.0% | W/V | OSHA PEL 2mg/mƒ |
| Water, Deionized ASTM Type II | CAS# 7732-18-5 | 60-70% | V/V | N/A |
| Proprietary Blend of Electrolytes | - | 15-20% | W/V | N/A |
Causes severe irritation and burns. May be harmful if swallowed. May be harmful if absorbed through the skin. Avoid breathing vapor or dust.Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.
Emergency Overview:POISON! DANGER! CORROSIVE. LIQUID AND MIST CAUSE SEVERE BURNS TO ALL
BODY TISSUE. MAY BE FATAL IF SWALLOWED. HARMFUL IF INHALED. INHALATION MAY CAUSE LUNG AND TOOTH DAMAGE. FLAMMABLE LIQUID AND VAPOR. CORROSIVE!
Inhalation:Inhalation of Vapors can cause Coughing, Choking, Inflammation, of the Nose, Throat, and
Upper Respiratory Tract, and in Severe Cases, Pulmonary Edema, Circulatory Failure, and Death.
Ingestion:CORROSIVE! Swallowing can cause Immediate Pain and Burns of the Mouth, Throat, Esophagus, and Gastrointestinal Tract. May cause Nausea, Vomiting, and Diarrhea, and in Severe Cases, Death.
Skin:CORROSIVE! Can cause Redness, Pain, and Severe Skin Burns. Concentrated Solutions Cause Deep Ulcers and Discolor of Skin.
CORROSIVE! Vapors are Irritating and May cause Damage to Eyes. Contact May cause Severe Burns and Permanent Eye Damage.
chronic Exposure:Eye Contact:Long-Term Exposure to Concentrated Vapors May cause Erosion of Teeth. Long-Term Exposures Seldom Occur due to the Corrosive Properties of the Acid.
Aggravated by Exposure:Persons with Pre-Existing skin Disorders or Eye Disease May be more Susceptible to the Effects of this Substance.
Causes severe irritation and burns. May be harmful if swallowed. May be harmful if absorbed through the skin. Avoid breathing vapor or dust. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.
|
SKIN: |
Remove contaminated clothing. Wash exposed area with soap and water. if irritation persists, seek medical attention. |
| EYES: | Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. |
| INHALATION: | Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen |
| INGESTION: | Give several glasses of milk or water. Vomiting may occur spontaneously, but DO NOT INDUCE! Never give anything by mouth to an unconscious person |
|
Fire Extinguisher Type: |
Any means suitable for extinguishing surrounding fire |
| Fire / Explosion Hazards: | Negligible fire hazard when exposed to heat or flame. |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
ventilate area of leak or spill. Take up with sand or other inert material and place in conatier for later disposal. Neutralize with weak acid.
Ventilate area or Leak or Spill. Remove all Sources of Ignition. Wear Appropriate Personal Protective Equipment as Specified in Section 8. Isolate Hazard Area. Keep Unnecessary and Unprotected Personnel from Entering. Contain and Recover Liquid when Possible. Use Non-Sparking Tools and Equipment. Neutralize with Soda Ash or Limt and Absorb with an Inert Material (e.g., Vermiculite, Dry Sand, Earth), and Place in a Chemical Waste Container. Do Not Use Combustible Materials, such as Saw Dust. Do Not Flush to Sewer! US Regulations (CERCLA) Require Reporting Spills and Releases to Soil, Water and Air in Excess of Reportable Quantities.
Store in a cool dry place. Store above 60 deg F to prevent freezing. Do not get in eyes, on skin, on clothing. Wash thoroughly after handling. Keep.
|
Respiratory Protection |
None required containers tightly closed |
|
Ventilation |
Local |
| OTHER |
Mechanical |
| Protective Gloves | Neoprene or nitrile gloves are recommended. |
| EYE PROTECTION | Goggles and Face Shield |
| Other Protective Equipment | Wear appropriate clothing to prevent skin exposure as boots, gloves, apron or coveralls |
| BOILING POINT | 213° F (101° C) |
| VAPOR PRESSURE | not available |
| MELTING POINT | 27° F (-3° C) |
| VAPOR DENSITY | not available |
| EVAPORATION RATE |
information not available |
| Appearance /Odors | Clearless liquid,odorless |
| Flash Point |
Not applicable |
| Specific Gravity |
1.2 (+/- 0.01) |
| Percent Volatile by | ~75% |
| Evaporation Standard | |
| Auto Ignition Temp |
Not applicable |
| Lower Flamm. Limit in Air |
Not applicable |
| Upper Flamm. Limit in Air |
Not applicable |
| Solubility in Water | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
Moisture, may ignite combustibles. |
|
MATERIALS TO AVOID |
Acids, Acrolein, alcohols, aluminum, Tin,zinc, Chlorine, Acetone |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
potassium oxide Not reported to occur under normal conditions |
|
HAZARDOUS POLYMERIZATION |
will not occur |
| Conditions to Avoid | None known |
Carcinogenic Reference: NTP Carcinogen - Known: No, IARC Category- None
Environmental Fate:No information found
Ecological Toxicity:Potassium Hydroxide: TL m: 80 ppm/Mosquito fish/ 24 hr./ Fresh water
Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements..
DOT Classification: UN1814, Potassium Hydroxide Solution,8, PG II
DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.
Chemical Inventory Status –
Part 1:Ingrdient
Potassium Hydroxide (1310-58-3)
Water (7732-18-5)
TSCA Yes Yes
EC Yes Yes
Japan YES Yes
Australia Yes Yes
Chemical Inventory Status –
Part 2:Ingredient
Potassium Hydroxide (1310-58-3)
Water (7732-18-5)
Korea Yes Yes
DSL Yes Yes
NDSL No No
Phil. Yes Yes
Federal, State & International Regulations –
Part 1: Ingredient.
Potassium Hydroxide (1310-58-3)
Water (7732-18-5)
RQ NO No
TPQ No No
List NO No
Chemical Catg No No.
Federal, State &
International Regulations –
Part 2:Ingredient
Potassium Hydroxide (1310-58-3)
Water (7732-18-5)
CERCLA 1000 No
261.33 No No
8(d) No No
Chemical Weapons Convention: No
TSCA 12 (b):No
CDTA:No MIXTURE/LIQUID
SARA 311/312: Acute: YES
Chronic: YES
Fire: No
Pressure: No
Reactivity: No
Australian Hazchem Code: 2R
Poison Schedule: S6
This material causes severe burns to the skin, eyes, respiratory tract, and gastrointestinal tract. It is corrosive via skin contact, eye contact, inhalation,
and ingestion, and toxic if ingested. Contact with mucous membranes may result in serious damage, potentially leading to perforation of the esophagus and stomach.
At-Risk Populations
Individuals with pre-existing skin or eye conditions may be at increased risk from exposure.
Chronic Exposure Effects
Prolonged or repeated contact with potassium hydroxide may result in the development of defatting dermatitis. Continued irritation can lead to further complications.
NFPA Hazard Ratings
Health- 3
Flammability- 0
Reactivity- 1
The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material