General Purpose Cleaning Solvent

General Purpose Cleaning & Solvent This cleaner specialy formulated to attack, penetrate and remove oil, dirt, dust, stains and organic deposits from large and small surface areas.

This is a multipurpose  product  specialy formulated to remove grime, dirt, and oily deposits from concrete, steel, and wooden decks. This cleaner specialy formulated  to attack, penetrate and remove oil, dirt, dust, stains and organic deposits from large and small surface areas. It is an innovative, water soluble, biodegradable liquid product, pH buffered, formulated with strong wetting and cleaning agents. 

  • Ideal for deck and concrete preparation and maintenance
  • Cleans and degreases decks, concrete and more

 

After USING this product , For BRIGHTNING of FLOOR use DECK BRIGHTNER  RXSOL-13-1015-020  ( www.rxmarine.com/floor-polish-self-shining-liquid )

Application

The main purpose of this solvent cleaners is to remove contaminants such as dirt, oxidation (graying), mold, algae, and in some cases, a very deteriorated stain that has failed.
Note: Deck cleaners are not designed to remove old stains. You would need a deck stain stripper for this.

•Suitable for a wide range of industrial and marine cleaning applications such as toilets, bathing rooms, windows, floors, carpets, storage rooms, crew accommodations, etc.

•Safe to use, even with bear hands, acts quickly and efficiently.

• Can be used with a wide range of other products.
•A water base product where no drying time is 
required.

•Non-flammable, pH buffered, non-corrosive and non-toxic.

•Eliminator bad odor with its strong but pleasant scent.

•Has biocide properties and can be easily rinsed with water.

•Completely biodegradable.
•100% soluble in fresh or seawater.
•Cleans thoroughly leaving no films or stains behind.

•Cost effective, easy to handle and apply. 

Dose

Generals Cleaning Method :::  1 Ltrs Solvent with 5 Ltrs Water 

Heavy SOILED AREA :::  Should be used undiluted, to achieve maximum results 

Procedure 

GENERAL CLEANING AND SOLVENT may be applied by conventional methods such as a brush, sponge, or a mop. 

Technical specifications

GENERAL CLEANING AND SOLVENT is a concentrated, biodegradable water soluble liquid 

Free from caustic / Alkali based materials, While general Deck cleaners are typically made up of caustics soaps that will aid in the scrubbing or pressure washing of your wood during the prepping process. 

pH Balance 
it is non–flammable 
non– 
corrosive and non–toxic. 

 

Appearance/Color  ::: Clear,colorlessliquid 
Specific gravity  ::: 1.00 gr/cmat 15°C 
Flash Point  ::: None
pH ::: 7–8
Odor ::: mild, characteristic odor 

Note

Packing sizes
General Purpose Cleaning Solvent available in 5, 10, 25, 50, 210 Ltr PACK
MSDS

Product Name RXSOL-16-1030-025
Product Type General Purpose Cleaning Solvent

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujairah, Muscat, Nairobi

Phone +91 22 65113333 / 5555 / 9999 / 27611360
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

 
Ingredient Name   CAS Number EINECS R Phrase S Phrase Weight %
Methyl Ester 67784-80-9   205-392-9 R11, R36/37/38 S23 9-14
Naphtha Petroleum,
Hydrodesulfurized light
92045-53-9 295-434-2
R11, R38,
R51/53,
R65, R67
S9, S16, S23, S24,
S33,S43A, S57,S60, S62
1-5
Hydrotreated Petroleum
Distillates heavy
64742-48-9 265-150-3 R65, R66 S23, S24, S33, S62 >60

Odour

Emergency Overview

Appearance

Clear liquid, pale yellow color.Mild odor

Contact with eyes

This product may cause slight irritation to the eyes.

Contact with skin

May cause slight skin irritation.Product contains an ingredient known to be a sensitizer in animals.Therefore, prolonged or repeated contact with the product may result in allergic skin sensitization reactions.

Inhalation

Inhalation of vapors or mists of the product may be irritating to the respiratory system.

Ingestion

ngestion of large amounts may produce gastrointestinal disturbances including irritation, nausea, and diarrhea.

Contact with skin

For skin contact flush with large amounts of water.If irritation persists, get medical attention.

Contact with eyes

Immediately flush eyes with water for at least 15 minutes while holding eyelids open. If irritation persists get medical attention.

Ingestion

If ingestion of a large amount does occur, seek medical attention.Do not induce vomiting.

Inhalation

If symptoms are experienced, remove source of contamination or move victim to fresh air.If symptoms persist, get medical attention.If the affected person is not breathing, apply artificial respiration.If breathing is difficult, give oxygen.Seek medical attention.

Fire-fighting measures

Possibility of spontaneous combustion ("oily rag" problem). Rags soaked with any solvent present a fire hazard and should always be stored in a UL listed or Factory Mutual approved, covered container.
Improperly stored rags can create conditions that lead to oxidation, that in turn, may lead to spontaneous combustion.

Flash Point  (> 93.9 °C), > 201 F PMCC
Extinguishing Media Dry chemical, foam, carbon dioxide, water fog.
Fire Fighting Equipment / Instructions
Firefighters should wear full fire-fighting turn-out gear (full Bunker gear) including NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive 
pressure mode.

Emergency Action:

Isolate spill or leak area immediately.Keep unauthorized personnel away.Stay upwind.Keep out of low areas.Ventilate closed spaces before entering. Eliminate all ignition sources (no smoking, flares, sparks or flames in immediate area).Do not touch or walk through spilled material.Wear appropriate personal protective equipment during cleanup.

Small Spills:

Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal.

Large Spills:
Dike ahead of liquid spill for later disposal.Prevent entry into waterways, sewers,  basements or confined areas.
Surfaces may become slippery after spillage.

Handling Procedures

Wash thoroughly after handling.As with all chemicals, good industrial hygiene practices should be followed when handling this material.

 

Storage Procedures

Store in a dry, well-ventilated area.Store away from strong oxidizers.Do not handle or store near an open flame, heat or other sources of ignition.

Engineering Controls

Use general ventilation.Local exhaust is suggested for use, where possible, in enclosed or confined spaces.

Personal Protective Equipment: Eyes/Face

Wear chemical goggles; face shield (if splashing is possible).

Personal Protective Equipment: Skin

Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) No respiratory protection is required unless subject to contact with substance mist.

Personal Protective Equipment: Respiratory If vapors are present or irritation is experienced, NIOSH approved respiratory protection for organic vapors should be worn.
Personal Protective Equipment: General Eye wash fountain and emergency showers are recommended.       

Flash Point

(> 93.9 °C), > 201 F PMCC

Boiling Point

(> 315.6 °C), > 600 F

Specific Gravity

(7.322 lb/gal), 0.88 g/ml (H2O = 1)

Percent Volatile

NIL

Vapor Pressure

2 mmHg

Vapor Density Estimated heavier than air
Evaporation Rate Estimated slower than ethyl ether.
Appearance and Odor Clear liquid, pale yellow color.Mild odor

Chemical Stability

Stable under normal conditions.

Conditions to Avoid

Avoid strong oxidizing agents.

Incompatibility

This product may react with strong oxidizing agents, alkalies.

Hazardous Decomposition

Methanol may be evolved if hydrolyzed or saponified.

Hazardous Polymerization Will not occur.

Carcinogenicity

Not listed as carcinogenic according to IARC, NTP or OSHA.

Mutagenicity

This product class is non-mutagenic.

LD50 Value

Oral LD50 (rat) = >5000 - 15,000 mg/kgDermal LD50 (rabbit) = >2,000 or equal to 20,000 mg/kg

Ecotoxicity

No data available on finished product.

Environmental Fate

This product class is readily biodegradable.

Disposal Instructions

Treatment, storage, transportation and disposal must be in accordance with applicable Federal, State/Provincial and Local regulations. Regulations may vary in different locations. Characterization and compliance with applicable laws are the responsibility solely of the generator.

DOT Proper Shipping Name

Refer to bill of lading or container label for DOT or other transportation hazard classification, if any.

Ingredient Name

CAS Number

Percent

Methyl ester,

67784-80-9

50-63

Inventories
All components of this product are listed on the following inventories:U.S.A.(TSCA), Canada(DSL), Europe(EINECS/ELINCS/Polymer/NLP), Korea(ECL), Australia(AICS), There is no calculable reportable quantity (RQ) for this product.

Disclaimer
Disclaimer: Nothing contained herein grants or extends a license, express or implied, in connection with patents, issued or pending, of the manufacturer or others. The information contained herein is based on the manufacturer's own study and the works of others. The manufacturer makes no warranties, expressed or implied, as to the accuracy, completeness, or adequacy of the information contained herein. The RX MARINE INTERNATIONAL shall not be held liable (regardless of fault) to the vendee's employees, or anyone for any direct, special or consequential damages arising out of or in connection with the accuracy, completeness, adequacy or furnishing of such information. 

HAZARD RATINGS

HMIS

NFPA

Health

1

1
 
Flammability 1 1
Reactivity 0 0
PPE X  

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

 

Phone +91 22 65113333 / 5555 / 9999 / 27611360
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com
 

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@mumbaichemical.com