RXSOL ORG - 1

Extremely effective liquid blend of concentrated emulsifier with penetrating agents suitable for for cleaning and degreasing of double bottom, deep tanks etc which is used for RPO / fuel oils It can also be used for BOILERS , MARINE DIESEL ENGINE COO

RXSOL-16-2020-030 is an extremely effective liquid blend of concentrated emulsifier with penetrating agents, mild abrasives and wetting agents which makes this an excellent liquid scouring cleansers for cleaning and degreasing of double bottom, deep tanks etc which is used for RPO / fuel oils It can also be used for BOILERS, MARINE DIESEL ENGINE COOLING WATER SYSTEM and for local cleaning and degreasing of engine rooms on deck.

Application

Directions for Use and Dose Rates: RXSOL-16-2020-030 is specially formulated for cleaning double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck. Soak Method for heavy soil put parts into undiluted RXSOL-20-2020, for general soiling use a solution of 10-30%  RXSOL-16-2020-030 water. Parts should be soaked for at least 30 minutes before washing off with water. Spraying Method Use neat RXSOL-16-2020-030 over all soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., Scrubbing will assist the cleaning operation for stubborn deposits.

Rock and Roll Method Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.

1) First of all heat the remaining oil in tanks .

2)By stripping constantly. flush the tank with sea water,

3) Close all suction and discharge valves .

4) 1st Dose Fill the tanks by ½ to 1 litre RXSOL-16-2020-030 per tone of water through pipe or manhole , for 75-80% of capacity of tank to be cleaned.

5) Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this temperature for 24 hours.

6) Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.

7) Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.

8) Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:

9) For completion add second dose of RXSOL-16-2020-030 , fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .

10) Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.

11) To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely
Dosage Chart for Rock and Roll Cleaning
Fuel Oil Viscositry Centistokes at 50°C Over 320 and sludge tanks
RXSOL-16-2020-030/ 1000 Lts of water
1st Stage              2nd Stage
1 litre                     1 litre             150 - 300
1 litre                      0.75 litre        Up to 50
0.5 litre …

PHYSICAL PROPERTIES :

 

COLOUR Light brown liquid  
DENSITY In g/cm3 at 15°C: 0.9  
FLASH POINT Above 70 °C  
PACKAGING Order No:.RXSOL-16-2020-030 Size (in litres)25 , , 210
Dose

CHARACTERISTIC :

• Highly effective concentrated cleaner .

• Versatile, can be used for a wide application range ( for TANK or general cleaning .)

• Provides quick and thorough emulsifying action.

• Can be used for cleaning , gas freeing of double bottom, deep and other fuel oil bunker tanks.

• May also be used for cleaning and gas-freeing of crude and refined mineral oil cargo tanks.

• It can be used as a general purpose cleaner to remove oil and grease deposits and cleaning of bilge spaces and engine rooms from soiled surfaces.

• Can be used for degreasing and cleaning engine cooling water systems Read the Material Safety Data Sheet before using this product


 


 

Technical specifications

Note

Specially formulated for cleaning of oily Greasy Surface

Remarks / Precaution

Packing sizes
20 Ltr, 25 Ltr, 35 Ltr, 50 Ltr, 210Ltr
MSDS

Product Name : RXSOL-16-2020-030
Product Type : RXSOL ORG1

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone : +91 22 65113333 / 5555 / 9999 / 27611360
Fax : +91 22 2781 1318 :::AOH :0091 9821214367
Email : mail@rxmarine.com , sales@tankcleaner.net/
Website : www.rxmarine.com/ , www.tankcleaner.net/

 

Chemica Name

Concentration

CAS Number

EC Number

R Phrases*

Symbols Disodium

Hydrogenated Mixture

       

 

organic solvents          

Fatty Alcohol Ethoxylate

       

 

Mixture of the substances listed below with no hazardous additions.
Hydrogenated Mixture of C10-C13 organic solvents : Xn,65
Symbol: Xn, N
Fatty Alcohol Ethoxylate 34398-01-1 1 - 5 Xi,36/38
10-25% No Hazardous additionsz
Xn=Harmful, Xi=Irritant, N=Environmentally Harmfull

Human Health  Hazards  R 36/38

Causes Irritation / Inhalation may cause headache & dizziness . may cause adverse effects to aquatic environment.
Keep away from food, children , animal .

INHALATION supply fresh air on irritation  medical attention require & show this MSDS to physician.
SKIN contact In case of contact with skin , wash immediately with plenty of water and soap   Remove contaminated clothes. On extra irritation use ointement on Doctor advice.
EYE  contact Flush with running water on open eyelids for at least 15 minutes, Immediately medical attention require.
INGESTION seek medical attention , don’t try to drink more water / milk because too much water increase the danger of vomiting . ( on vomiting always keep head low to prevent inhalation of airways )

Suitable   Water , fog or mist, alcohol-resistant foam, on small fires dry chemical, carbon dioxide (CO2) also can used.
Not suitable  Alcohol foam / and high pressure of water jet may cause splitting of excess materials. 
Special  container close to fire cooled immediately then remove to other place.
Precaution for fire-fighters Self contained breathing apparatus or apparatus should attached to air supply. 
NOTE : fired materilas vapours are heavier than air and may travel along the ground for to ignition sources , so try to move all sources to safe distance otherwise keep in cooling mode.

ENVIROMENTAL PRECAUTION Direct flow into drainage system, surface or ground water is  prohibited.
CLEANING METHOD for preventing the spreading of  materials remove spill mechanically or with absorbent materials and dispose of in accordance with section 13.Flush with large amounts of water to clean the area.Ventilate well.
Personal During usage of chemical personal should use all normal protective equipment and avoid contact with eye and skin and for use in close environment personnel should use respiratory breathing apparatus.

Condition to Avoid Flammable but product is stable under normal condition , take precaution as industrial chemical .
Materials  to Avoid Do not subject directly to ALKALINE / Acidic medium.
Handling  Keep Container Tightly Closed in the original container and keep away from open flames / ignition sources
NOTE :Eyewash facilities require at workplace
- The product causes corrosion on skin and mucous membranes
GENERALLY Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treatment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com
• Dilute in water (always use plastic jar and RXSOL should be added to  water  never add water to RXSOL.)

Personal protection
Respiratory System Protection Approved respirator must be worn when spraying otherwise normally not required
Eye Protection if there is possibility to contact wear goggles for eye protection
Hand protection wear PVC chemical resistance protective gloves
Other Information smoking in store / work area is prohibited.

APPEARANCE Clear brownish liquid
DENSITY g/cm3 at 15°C: 0.89
pH NA
FLASH POINT 90 ºC
Boiling point 210 ºC
Ignition temp N/A
SOLUBILITY Emulsifiable with water / soluble in most solvents
   
   
   

Stable under normal condition  on access of heat Vapour/gas may form explosive mixtures with air.
Hazardous Decomposition Products No decomposition if stored and used as directed.  In FIRE combustion CO, CO2 , NH3 , SOX etc hazardous gas produced.
NOTE AVOID CONTACT WITH ALKALINE SUBJECT / high temperature / fire .
Note MATERIALS TO AVOID Hydrocarbons and their derivatives may attack certain types of plastic, rubber and paint.

Skin Irritation Gives irritation may causes dryness. And prolonged contact with skin can cause degreasing effect.
Eye Irritat Cause severe irritation
Sensitization Sensitizing properties not known
Chronic Toxicity Not Identified
Carcinogencity Not regulated. ( prolonged inhalation of solvents may cause chronic  solvent intoxication.

RXSOL OB 1005 emulsifies in water and degradable , Toxic to aquatic organism & dangerous for environment but no enviromental problem will create when the product is used correctly . in its intended use the product will not be released into the environment.

As per guide line of local rules and regulation and before disposal and neutralization pl. refer 07 article..

Goods classified for road / rail  / sea transport : YES with UN-no: : 3082
Proper shipping name: Environmentally hazardous liquid: contains  (Alkyl (C3-C8) Benzenes)
Hazard identification no.: 90  Product identification (UN) no.: 3082
TREMCARD no. CEFIC: 90G01
Marine pollutant: Yes
Flash point : 90 ºC
Labelcolour : White./Black.

Symbols Xn, N
Contains Aromatic Hydrocarbons, Alkyl (C3-C8) benzenes
R-phrases R-51/53 Toxic to aquatic organisms/may cause long term adverse effects in the Environment
R-52 Marine Pollutant
R-65 Harmful May cause lung damage if swallowed
S-phrases S-23 Do not breathe vapour
S-24 Avoid contact with skin
S-60 This material and its container must be disposed of as hazardous waste
S-61 Avoid spillage to the environment. Ask for special instructions/safety

Datasheet

S-62 If swallowed, do not induce vomiting; seek medical advice immediately
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
REFERENCES Classified according to European directive on classification of dangerous preparations 90/492/EEC and accordance with EU directive 88/379. .

on the basis of information and experience as well as our present knowledge this guidelines is only  safe for  handling, use, processing, storage, transport, disposal and discharge; this is not a guarantee or quality of specification. And combination with other products will lost the properties. It is always the responsibility of the user to take all necessary steps  to ensure that information given here is read and understood by all who use, handle, dispose of or in any way come in contact with the product.
It is not to be considered as a guarantee of the products properties. Disclaim::::::: The information in this MSDS is meant as a description of the safety requirements of our product.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@mumbaichemical.com