RXSOL 2000 210 Ltr is a unique formulation with organic Corrosion Inhibitors, Anti-Scalant for use in closed cooling water systems, as a high temperature coolant for internal combustion stationers, engines, machinery, snow melting systems, industrial heat transfer fluids, for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid , also used as a corrosion inhibitor ( Protects all the metals including cast iron , mild steel , copper .
It is effective against liner pitting and cavitation erosion. It prevents over heating of engine and thus reducing chances of shut down. It is non-harmful to radiator or heater connecting hoses, diesel liner seals and ‘O’ rings.
Engine Radiator Corrosion protection is achieved by the film-forming ability of the corrosion inhibitor and scale suppressant to keep engines clean and free from scale, and reduce downtime and maintenance costs.
The product protects cooling systems against corrosion, liner pitting, cavitation-erosion, mineral scale deposits and electrolysis.
Application: All types of Engine Jackets, Radiator and Engine coolant.
The stable oxide film that is formed by RXSOL 2000-II prevents corrosion caused by electrolytic action between dissimilar metals used in the system. RXSOL 2000 has been field tested and found to have no detrimental effects on non metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these’ systems.
Application-Dg*
Sets Internal combustion engines closed circuit cooling system compressor cooling system. Rxsol 2000-II incorporates superior corrosion inhibitors to prevent corrosion works by free of scale deposits.
Advatages: -
1. Prolong the life of equipment by keeping scale and corrosion free. Since RXSOL 2000 Ltr is alkaline and so will suppress acid corrosion, which would otherwise result in corrosion damage such as pitting. However, the alkalinity control is such that even if the product is accidentally overdosed, the pH of the water will remain within limits. The metals which would be affected by extremes of alkalinity or acidity are protected. protect cast iron diesel engine cooling systems.
2. Improves generating cooling efficiency by maintaining a clean heat transfer by protect against sludge and mineral scale formation.
3. Corrosion protection by using superior corrosion inhibitor.
4. Reduced maintenance and down time
5. Compatible with Coolants / Antifreeze solution / Glycol .
6. Friendly with Metals (Like steel, Copper, Aluminum, all alloys) & Non-metal (Rubber, Hoses, Gasket , and ‘O’rings.etc.)
7. Prevents over heating Effective against liner pitting and cavitation erosion.
NOTE :::
•Protects both ferrous and non-ferrous metals from oxygen & corrosion.
•Compatible with most coolants and anti frizzles.
•Non staining.
Initial dosage for an untreated system is 9 litres of RXSOL 2000 / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL 2000 every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval .
Benzotriazole 14-15%
This product also contails Benzotriazole , which is very effective effective corrosion inhibitor for copper and its alloys by preventing undesirable surface reactions. It is known that a passive layer, consisting of a complex between copper and benzotriazole, is formed when copper is immersed in a solution containing benzotriazole. The passive layer is insoluble in aqueous and many organic solutions. There is a positive correlation between the thickness of the passive layer and the efficiency of preventing corrosion. The exact structure of the copper-BTA complex is controversial and many proposals have been suggested.
AREAS OF APPLICATION :
•Automobile.
•Heavy Equipment.
•Generators, Marine Engines.
•Ship or Rig Equipment.
In cases where systems are contaminated with oil and/or scale they should be cleaned before starting to apply RXSOL 2000 .There are suitable RXSOL BRAND products to carry out the cleaning. Degreasing should be carried out using RXSOL 2000 and descaling by using RXSOL 2000.
SPECIFICATION / HANDLING
Color : Odour Pink/ red (Colour changes of the product can not be excluded the effectively will however not impaired.)
Sp. Gravity : 1.1 to 1.25
pH : Alkaline (11.3 – 11.5)
RXSOL-2000 is an alkaline product & should be handled like other chemical Avoid contact with Eyes, Skin ,in case of contact ,wash with copious amounts of water immediately.
Freezing Point - 17 0 c
Nitrite (as PPM NO2) 0 100-200 300-600 700-900 1100-1300 1440-2400
RXSOL 2000 /1000L 13.0 11.3 8-10 5-7 1.5-3.5 0
METHOD OF USE
1. Properly clean the system with water and alkaline liquid, if necessary.
2. Add 0 .15-1.5 % of Rxsol -2000 in system or recommended Nitrite level 1400 – 2500 ppm can be measured and controlled by any standard RXSOL test kit for Nitrite, Chloride test also helps to detect excess contamination to maintain accepted levels . When the product is dosed as recommended limit By buffering action of RXSOL - 2000 , pH should be maintained between 8.3 and 10 by the treatment.
NOTE ::: Engine cooling system should be drained, flushed and if necessary chemically cleaned with (Aluminum & Metal Cleaner) for to remove old rust and scale deposits, before treatment with RXSOL 2000.
| Product Name | : | RXSOL-2000 |
| Product Type | : | DIESEL COOLING WATER CORROSION INHIBITOR-RXSOL-40-2000-210 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Chennai, Kolkata, Visakhapatnam, Gandhidham, Hazira, Fujairah, Muscat
| Phone | : | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | : | +91 22 2781 1318 :::AOH :0091 9821214367 |
| : | mail@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
|
Sodium Nitrite |
1-5 |
7632-00-0 |
231-555-9 |
8, 25, 50 |
| Sodium Tetraborate | 2-3 | 1330-43-4 | 215-540-4 | 60, 61 |
| Sodium Metasilicate | 1-5 | 6834-92-0 | 229-912-9 | 34, 37 |
| Sodium Mercaptobenzothiazole | >1 | 2492-26-4 | 219-660-8 | 34, 43 |
Properitory 60-70%
This product also contails Benzotriazole, which is very effective effective corrosion inhibitor for copper and its alloys by preventing undesirable surface reactions. It is known that a passive layer, consisting of a complex between copper and benzotriazole, is formed when copper is immersed in a solution containing benzotriazole. The passive layer is insoluble in aqueous and many organic solutions. There is a positive correlation between the thickness of the passive layer and the efficiency of preventing corrosion. The exact structure of the copper-BTA complex is controversial and many proposals have been suggested.
*See Section 16
|
Odour |
Odourless |
|
Appearance |
Redis to Pink, soluble in water |
|
Contact with eyes |
May cause pain |
|
Contact with skin |
In cases of severe exposure, severe irritation may develop |
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract |
|
Ingestion |
Toxic if swallowed (R25) |
|
Contact with skin |
Remove contaminated clothing immediately and drench affected skin with plenty of water ontaminated clothing should be laundered before reuse When in doubt or symptoms persist, seek medical attention |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes Irrigate eyes thoroughly whilst lifting eyelids Obtain immediate medical attention |
|
Ingestion |
Never make an unconscious person vomit or drink fluids Give water or milk to drink Induce vomiting (only if patient is conscious) Obtain immediate medical attention |
|
Inhalation |
Inhalation is unlikely to occur Remove patient to fresh air. When in doubt or symptoms persist, seek medical attention |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) |
- Nitrogen oxides may be formed.
- Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions.
- Substance evolves toxic fumes, wear self-contained breathing apparatus.
|
Personal Precautions |
Wear protective clothing as per section 8 |
|
Environmental Precautions |
Do not allow to enter public sewers and watercourses |
|
Immediate Actions |
Use appropriate containment to avoid environmental contamination (S57) |
|
Clean Up Actions |
Absorb spillage in inert material and shovel up .Ventilate the area and wash spill site after material pick-up is complete |
|
Special Precautions |
Wear protective clothing as per section 8 |
|
Handling |
Wear protective clothing as per section 8.Avoid contact with skin and eyes (S24/25) Eyewash bottles should be available |
|
Storage |
Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from heat Protect from frost |
|
Exposure controls |
Refer 6 and 7 Points for precautions required for this product. |
|
Occupational exposure controls |
Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) |
|
Odour |
Odourless |
|
|
Appearance |
Redis to Pink Liquid, soluble in water |
|
|
pH |
11.3 to 11.8 at 100 % concentration |
|
|
Boiling point |
100 °C at 760 mm /Hg |
|
|
Vapour pressure |
not known |
|
|
Vapour density |
not applicable |
|
|
Freezing point |
0 °C at 760 mm/Hg |
|
|
Completely soluble in water |
||
|
Specific gravity |
(water=1) 1.1 to 1.25 |
|
- This article is considered stable under normal conditions
- Avoid contact with acid
- Incompatible with acid, Contact with acids liberates toxic gas (R31)
- See Section 5
Information on toxicological effects
- LD50 (oral,rat) (Sodiumtetraborate) 4500-5000 mg/kg
- LD50 (oral,rat) (Sodium nitrite) 180 mg/kg
Inhalation - Vapours or aerosols may cause irritation of eyes, nose and respiratory tract Contact with skin
- In cases of severe exposure, redness and irritatio n may develop
Contact with eyes
- In cases of severe exposure, redness and irritation may develop
Ingestion
- Not regarded as a potential route of exposure.
- In cases of severe exposure, cyanosis may develop
Carcinogenicity
- No evidence of carcinogenic effects
Teratogenicity
- No evidence of reproductive effects
Mutagenicity
- No evidence of mutagenic effects
Ecotoxicity
- LC50 (fish) (Sodium nitrite) 0.56-1.78 mg/l (96 hr)
- EC50 (daphnia) (Sodium nitrite) 12.5-100 mg/l (48hr)
- LC50 (fish) (Sodium tetraborate) 650 mg/l (96 hr)
- EC50 (daphnia) (Sodium tetraborate) 2130 mg/l (48hr)
Mobility in soil
- Completely soluble in water
Waste treatment methods - Disposal should be in accordance with local, state or national legislation
- Not classified as hazardous for transport
|
Classification and labeling |
Contains Benzothiazol-2-thiol. May produce an allergic reaction. |
|
Risk Phrases |
Toxic if swallowed (R25) |
|
Safety Phrases |
Wear suitable protective clothing, eye/face protection and gloves (S36/37/39) n case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45). |
Text of R and S phrase codes used in this safety data sheet:- R25: Toxic I f swallowed; R43: May cause sensitisation by skin contact; . Contact with combustible material may cause fire.The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents.The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product.In terms of safetyr equirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application (s) without seeking advice from manufacturer
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.