A chemical Brighting prepration for polishing product, RXSOL RUSTO BRIGHT is a mixture of concentrated inorganic acid for brightening and chemically polishing , Aluminium,copper and copper based alloys. It is an acid form also containing surfactant,suppressant and inhibitor for chemical poli shing (bright dipping) of most non ferou alloys. This formulation is widely used commercially. RXSOL-16-1694-025 contains additives to reduce nitrogen oxide fumes and to enhance the brightening ability.
- Brightening and chemically polishing of copper alloy components such as fasteners, valves, and wire.
- Prepare surface for electroplating
- Deoxidize copper alloys
Use as received to immerse and agitate the parts for 1 - 3 minutes, depending on the condition of the parts before dipping and the desired results. Before dipping, parts should preferably be as chemically clean as before electroplating, but degreasing is adequate, although some shortening of bath life may be expected. Temperature should be kept below 90F for best results. For heavy production, some form of cooling may be required.
Following the dip, rinsing must be thorough to remove the viscous acids remaining on the parts.For subsequent electroplating or water-dip lacquering, no further treatment is required. If the parts are to be dried, a further dip in Quik-Dri 1000 will insure spot free drying and will aid in the tarnish prevention.
Appearance – Transparent Liquid
Sp. Gr. At 25 C - 1.15 to 1.2
PH Value - 2.0 to 2.5
Water Compatibility - Should be water compatible.
Stickness – Non Sticky & Free flowing
FEATURES AND BENEFITS
- Excellent polishing and smoothing action
- Long use life provided water drag-in is kept to a minimum
- Slow rate of metal removal
- Contains no chromic acid
- Less fuming than sulfuric/nitric bright dips
- No residual passive film to inhibit electroplating
- Used at room temperature
CAUTION
RXSOL RC 4100 is a mixture of concentrated acids with Inhibitor and wetting agents and the normal safety precautions for handling such acids apply. Avoid skin, eye and oral contact. Wear protective clothing, gloves and goggles when handling the product. Flush exposed areas immediately with clean, cold water. Contact a doctor immediately in case of injury.
| Product Name | : RXSOL Rusto Bright |
| Part Number | : RXSOL-16-1694-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Mumbai, Kandla, Hazira, Chennai, Vizag, Kolkata, UAE, & Oman.
| Phone | +91 22 2087 1200 / 1300 / 1400 |
| Fax | +91 22 2761 2100 :::AOH :0091 9821214367 |
| 123@rxmarine.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | EINECS No | Wt.% | Symbol |
| Tri(hydroxyethyl)amine | 102-71-6 | 203-049-8 | 20 -30 % | Xi |
| 1,2-propanediol 200-338-0 | 57-55-6 | 200-338-0 | 1 - 5% | Xn |
| Diethylenimide oxide | 110-91-8 | 230-815-1 | 1 -5% | C |
| 2,2’,2’’-nitrilotriethanol acetatet | 14806-72-5 | 238-874-2 | 1 - 5 % | Xi |
| Signal Word | Warning |
| Physical Hazards | None |
| Hazard Statements |
Health Hazards: H316: Causes mild skin irritation H319: Causes serious eye irritation Environmental Hazards: None |
| Precautionary statements - prevention |
P261: Avoid breathing mist or vapors P264: Wash skin thoroughly after handling P273: Avoid release to theenvironment P280: Wear protective gloves and eye protection |
| Precautionary statements - response |
P301+310+P331: IF SWALLOWED: Call the POISON CENTER or doctor. DO NOT induce vomiting P303+P361+353: IF ON SKIN, Take off all contaminated clothing immediately. Rinse skin with water/shower P304+340: IF INHALED, Remove to fresh air and keep comfortable for breathing. If not breathing give artificial respiration. DO NOT use mouth to mouth resuscitation without proper protection P305+P351: IF IN EYES rinse cautiously with water for at least 15 minutes P306+P361: IF ON CLOTHING, Take off contaminated clothing P376: Stop leaks if safe to do so. See section 6 for proper clean up. |
| Storage Statements |
P403+P233: Store in a well-ventilated place, Keep container tightly closed when not in use |
| Eye Contact | In case of eye contact, rinse with plenty of water and seek medical attention. |
| Skin Contact | Wash off immediately with plenty of water for at least 15 minutes. Use a mild soap if available. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention immediately. |
| Inhalation: | If inhaled, If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician. |
| Ingestion: | If swallowed, do not induce vomiting. Allow victim to rinse his mouth and then to drink 2-4 cupfuls of water. Never give anything by mouth to an unconscious person. Call a physician. |
| Notes to Physicians | Treat symptomatically. |
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Protective Equipment | Use personal protective equipment. |
| Hazardous combustion products | Emits toxic fumes (carbon oxides, nitrogen oxides) under fire conditions. (See also Stability and Reactivity section). |
| Advice for firefighters | Wear self-contained breathing apparatus. Wear full protective equipment. |
| Specific extinguishing methods | Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. In the event of fire and/or explosion do not breathe fumes. |
| Personal precautions, protective equipment and emergency procedures |
Ensure adequate ventilation. Keep people away from and upwind of spill/leak. Avoid inhalation, ingestion and contact with skin and eyes. Wear suitable personal protective equipment.Respiratory protective equipment. |
| Enviromental Precaution | Do not allow contact with soil, surface or ground water.If the products get into drains, inform the relevant authorities immediately. |
|
Methods and materials for containment and cleaning up |
Neutralize spill. Absorb spill with noncombustible absorbent material, then place in a suitable container for disposal. Clean surfaces thoroughly with water to remove residual contamination. Dispose of all waste and cleanup materials in accordance with regulations. |
| Advice on safe handling | Do not ingest. Do not get in eyes, on skin, or on clothing. Do not breathe dust/ fume/ gas/ mist/ vapors/ spray. Use only with adequate ventilation. Wash hands thoroughly after handling. |
| Storage | Do not store near acids. Keep out of reach of children. Store in suitable labeled containers. Storage temperature : 10 °C to 50 °C |
| Advice on general occupational hygiene | Wash hands after use. Do not to eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. |
| Engineering Control | Provide general or local exhaust ventilation systems to maintain airborne concentrations below TLV/PELs Local exhaust ventilation is preferred because it prevents contaminant dispersion into the work area by controlling it at its source. | ||||||
| Personal Protection |
Eye protection : Wear eye protection/ face protection. Hand protection : Wear the following personal protective equipment: Standard glove type. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. Skin protection : Personal protective equipment comprising: suitable protective gloves, safety goggles and protective clothing Respiratory protection : When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. |
||||||
|
Exposure Limits: |
ACGIH = American Conference of Governmental Industrial Hygienists. TLV = Threshold Limit Value. OSHA = US Occupational Safety and Health Administration. PEL = Permissible Exposure Limits. |
||||||
| Hygiene measures | Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash face, hands and any exposed skin thoroughly after handling. Provide suitable facilities for quick drenching or flushing of the eyes and body in case of contact or splash hazard. |
Gloves Suit
| Form | Liquid |
| Colour | Colourless to slightly Yellow |
| Odour | Odourless |
| Boiling point | 100 °C |
| Flash Point | 220 °C |
| Freezing Point | -5°C |
| pH | 10-12 |
| Evaporation rate | No data available |
| Flammability (solid, gas) | No data available |
| Upper explosion limit | No data available |
| Lower explosion limit | No data available |
| Explosive properties | No data available |
| Vapor pressure | 0 kPa @ 20°C |
| Relative vapor density | No data available |
| Relative density | 1.01-1.15 |
| Water solubility | Soluble |
| Solubility in other solvents | No data available |
| Partition coefficient: octanol | No data available |
| Autoignition temperature | No data available |
| Thermal decomposition | No data available |
| Viscosity, kinematic | No data available |
| Explosive properties | No data available |
| Oxidizing properties | No data available |
| Molecular weight | No data available |
| VOC | No data available |
| Recativity | None |
| Stability | The product is stable.. |
| Possibility of hazardous reactions | Under normal conditions of storage and use, hazardous reactions will not occur. |
| Incompatible materials | Excessive Heat |
| Hazardous Decomposition |
Under normal conditions of storage and use, hazardous decomposition products should not be produced. |
| Condition to Avoid | None Known |
| Polymerization | Will not occur. |
| Route of Exposure | Inhalation, Eye contact, Skin contact |
| Eyes |
Irritation, redness, watering eyes, itchiness. |
| Skin | Irritation, redness, itchiness. |
| Ingestion | Irritation, nausea, vomiting, diarrhea. |
| Inhalation | Irritation, coughing, wheezing. |
| Chronic Exposure | Health injuries are not known or expected under normal use. |
| Acute oral toxicity |
LD50 [oral rat] 6400 mg/kg LC50 [dermal rat] 22500 mg/kg LC50- [oral rabbit] 11,000 mg/kg LC 50-oral [guinea pig] 11,000 mg/kg |
| Acute inhalation toxicity | No data available |
| Acute dermal toxicity | No data available |
| Classification | The classification was made by the conventional (calculation) method of Dangerous Preparations Directive(1999/45/EC) |
| Environmental Effects | No data available |
| Toxicity to fish | Aquatic vertebrates LC50 11800 mg/l Fish 96 hours |
| Toxicity to daphnia and others | Aquatic invertebrates EC50 610mg/l Daphnia 48 hours |
| Toxicity to algae | No data available |
| Biodegradability | 96% (28 d) |
| Persistence and degradability | No data available |
| Bioaccumulative potential | No data available |
| Mobility in soil | No data available |
| Remarks | Please consider the relevant national or regional provisions. Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities. |
| Waste Disposal | The product should not be allowed to enter drains, water courses or the soil. Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with local regulations. Dispose of wastes in an approved waste disposal facility |
| ADR/RID | Not regulated for transport / Not Degerous goods. |
| IMDG | Not regulated for transport / Not Degerous goods |
| IATA | Not regulated for transport / Not Degerous goods |
| Marine pollutant | No |
| Regulations | SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT) |
| 311/312 HAZARD CATEGORIES |
Not categorized |
| 313 REPORTABLE INGREDIENTS |
No ingredients present |
| 302/304 EMERGENCY PLANNING | No ingredients present |
| TSCA | All ingredients in this product are listed on the TSCA inventory |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |