WhiteSpirit Less 20 Percent AROMATICS

White spirit is a clear, colorless, flammable liquid that's a mixture of petroleum hydrocarbons.
Category

Description : Whitespirit ( Sol less then 20 percent AROMATICS)

White spirit is a clear, colorless, flammable liquid that's a mixture of petroleum hydrocarbons. It's also known as turpentine substitute, Stoddard solvent, mineral spirit, and paint thinner. 
Application
White spirit is used in many products, including:
Paints, Coatings, Waxes, Varnishes, Adhesives, Printing inks, and Liquid photocopier toners.
White spirit is a complex mixture that contains mainly C7-C12 hydrocarbons with a boiling range of 130-220°C. It has a viscosity of 0.4-0.5 Cps and is water white in color. 

White spirit can be released into the environment during its production, transport, and use. Exposure to white spirit can occur through breathing, drinking, or skin contact.

Dose
Physical uses :
  • Cleaning: White spirit is used as an industrial cleaner and paint thinner to clean and degrease surfaces
  • Thinning paint: White spirit is used to thin oil-based paints
  • Cleaning paint brushes: White spirit is commonly used in households to clean paint brushes
  • Solvent: White spirit is used as a solvent in paints, coatings, waxes, varnishes, adhesives, printing inks, and liquid photocopier toners
  • Extraction: White spirit is used as an extraction solvent in industry.

 

Technical specifications

 

PRODUCT NAME  : WHITESPIRIT (SOL<20%AROMATICS)
CAS number       :  
UN number       : 1300
Formula         :  
Odour    :  
Solubility in water    : INSOLUBLE
Density : 0.77 at 15oC
Boiling point    : 160oC
Melting point  : oC
Viscosity          : 1 cp at 20 
Flashpoint            : 41oC
Explosive limits      : 0.6 – 8.0 Vol%
Vapour pressure       : 6 mbar at 20oC
Skin absorption/irritation           : YES
TLV      Country  NL  Year 1995 :  
Pollution category    1994      : (B)

 

Note

Pharmaceutical Application : 

White spirit is used in pharmaceutical applications to produce sophisticated fine chemicals in microgram to multi-kilogram scales. 
White spirit is a petroleum-based solvent that is insoluble in water and is used for many purposes, including:
  • Cleaning: Cleaning paint brushes or thinning paint
  • Degreasing: Degreasing solvent
  • Extraction: Extracting oil-bituminous rock organic components from mineral
  • Solvent: Solvent in aerosols, wood preservatives, lacquers, varnishes, and asphalt products 
Remarks / Precaution

White spirit is a mixture of aliphatic, open-chain, or alicyclic C7 to C12 hydrocarbons. It is less toxic and flammable than turpentine, which is made from natural resin extracted from trees.

MSDS

Product Name RXSOL-19-1484-025
Product Type Whitespirit ( Sol 20%AROMATICS)

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333 / 5555 / 9999 / 27611360
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com 
Website www.rxmarine.com

Chemica Name CAS # PROPORTION
Medium aliphatic petroleum solvent 64742-88-7 >60%
Light aromatic petroleum solvent 6742-95-6 10 - 30%

Swallowed May cause symptoms of stomach pain, nausea and vomiting. Ingestion of large does may cause unconsciousness. If vomiting occurs after ingestion, small droplets of the liquid may enter the lungs (aspiration) with the risk of chemical pneumonia being induced.
Eye Liquid may cause moderate to sever eye irritation, vapour is irritating.
Skin Contact with the product may cause defatting and contribute to dermatitis.
Inhaled Inhalation may cause headache, nausea and dizziness. Higher concentrations may cause unconsciousness and coma. Death may result from severe and continued over-exposure.
Chronic Effects Inhalation and ingestion are the routes of entry into the body. The product defats the skin and prolonged or repeated contact may contribute to dermatitis.
Risk Phrase R65 - Harmful: May cause lung damage if swallowed.

Skin Remove contaminated clothing and wash thoroughly with soap and water. Use water alone, if soap is unavailable. Apply a moisturising hand cream, if available. Seek medical attention if any soreness or inflammation of the skin persists or develops later. Launder affected clothing before re-use.
Inhalation Remove to fresh air. Keep warm and at rest. If breathing is laboured, hold in a half upright position (this assists respiration). Apply artificial respiration if breathing has stopped. Seek URGENT medical attention for all but the most minor cases of over exposure.
Safety Phrase S2 - Keep out of reach of children
S23 -Do not breathe vapour
S24 -Avoid contact with skin
S62 -If swallowed, do not induce vomiting: seek medical advice immediately and show container or label to medical staff.

FLAMMABLE Solvent vapours can form explosive mixtures with air in poorly ventilated   conditions. Containers may explode if heated. Vapour is heavier than air and may travel along the ground, distant ignition is possible. Wear self contained breathing apparatus. If possible remove containers from the vicinity of the fire. Otherwise keep containers as cool as possible by spraying with water, from a protected position.
Extinguishing Media Foam, powder (bicarbonate or ammonium phosphate based) or carbon dioxide. Water is not effective for fire fighting and direct contact with water should be avoided.

Care for environmental protection
Do not allow product to enter drains or waterways where ground or surface water may be affected.

Storage / Transport: Class 3 Flammable Liquids should not be transported or stored with goods of:
Class 1 (Explosives)
Class 2.1 (Flammable gases, where both flammable liquid and flammable gases are in bulk)
Class 2.3 (Poisonous gases)
Class 4.2 (Spontaneously combustible substances)
Class 5.1 (Oxidising agents)
Class 6 (Poisonous (toxic) substances, where the flammable liquid is nitromethane)
Class 7 (Radioactive substances)
Store is a flammable liquids area, designated no smoking , away from all sources of ignition, out of direct sunlight in a cool well ventilated area below 250C. Higher temperatures may cause pressure build up inside containers. Protect containers against physical damage. Ventilation along the floor is advised   

Personal Protection Safety goggles, overalls and PVC gloves. A respirator with organic vapour filter will be required unless the work area is well ventilated. In confined or poorly ventilated areas use air supplied breathing apparatus. NB: TAKE THE LIMITS OF ABSORPTION CAPACITY INTO ACCOUNT. CHANGE FILTERS REGULARLY. 
 Flammability FLAMMABLE. Solvent vapours can form flammable mixtures with air. May evolve toxic fumes if heated or burned. The product may react with strong oxidising agents such as liquid or powdered chlorine. Not smoking

Appearance / Odour Water white liquid with a slight kerosene odour
Boiling Point 1470C - 1960C
Vapour Pressure 6mmHg
Specific Gravity 0.79
Flash Point 370C
Explosive Limit (%) L.E.L. 0.9% U.E.L. 7.0%
Solubility in Water Negligible (0.1%mass)
Other Properties pH: Not Aplicable

Condition to Avoid  Heat, Flame & Other Sources of Ignition.
Materials  to Avoid Do not subject to Reducing /Oxidizing Agents.
Hazardous Decomposition Products Do not occur

NOTE : No decomposition if used according to specifications.
 

Skin Irritation irritant wash with soap water
Eye Irritat  Moderate irritant , flush with copious amounts of water
Sensitization Not Sensitizing .

Comment  Not applicable
Ecotoxicity   Not applicable , Readily biodegradable
Water hazard class 2 (self-assessment): hazardous for water.
Do not allow product to reach ground water, water bodies or sewage system.
Danger to drinking water if even small quantities leak into soil.

This material must be disposed with local national regulations.
Product   Recommendation
Must be not dispose of together with household garbas.
Can be burnt under adherence to the necessary technical regulations.
Disposal must be made according to official regulations.
Can be reused or recycled after cleaning .

LAND TRANSPORT
9, Miscellionus Dangrous, substance and article

•Hazard designation of product: Xi Irritant.
•Irritating to eyes and skin.
•Safety phrases
2       -   Keep out reach of children If swallowed, seek medical attention immediately
22     -      Harmful if swallowed
26     -      In case of contact with eyes, rinse immediately with plenty of water and seek medical attention.
23     -     Do not Breathe
27     -     After contact with skin, wash immediately with plenty of water and soap and rinse thoroughly.
41     -    Risk of serious damage to eyes
•National regulations

These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
•Department issuing data specification sheet Environment protection department.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@mumbaichemical.com