A concentrated oil and grease solvent and emulsifier. Penetrates, dissolves and flushes away dirt , temporary coatings from metal and painted surfaces as well as wax, dirt, oils, greases from machinery, floors and equipment. Emulsion Degreaser will not flash ignite below its boiling point (210 degrees F.) and is self exinguishing.
Its POLYMER formulation provides multimetal corrosion protection for 24-48 hours.
-
Biodegradable, Heavy-duty temporary coating, grease and sludge remover
-
Effective cleaner for for light oils and greases
-
No reaction with painted surfaces, Non-flammable
-
High Viscous liquid that will cling to ceilings and vertical surfaces in a ready-to-use formulation
-
Dilution ration up to 0.5% also gives good result for cleaning.
-
Its Polymer based formulation gives corrosion protection on cleaned metal parts
Spray or mop Emulsion Degreaser over surface to be cleaned. If grease buildup is thick, score with a wire brush and mix with cleaner. Allow Emulsion Degreaser to stand for 10 minutes then hose off with water, preferably a pressure washer type system. Emulsion Degreaser can be used as a presoak or pretreat prior to cleaning with steam. For milder soils Emulsion Degreaser can be diluted with 10 parts of water. At this dilution can be used in tanks or for swabbing off surfaces. Emulsion Degreaser can be used safely on ferrous metals and is excellent for degreasing concrete floors prior to painting. It can also be used on engine blocks, chassis, machinery and shop floors.
INDUSTRIAL CLEANING :::
1st step ::: Apply full strength or diluted ( 40 part water and 60 PART RXSOL ) It can be sprayed with an airless, pot agricultural sprayer. Always test wet film coverage on a neutral surface before beginning. Let the product stand (wet) for 2-6 minutes, depending on the film thickness of the product to be removed and the length of time that the coating has cured. Reapplication may be required.
2nd step ::: For Removal of product and coating ::: use POWER WASHER with Pressure: 50-300 psi (3.4-21 bar) Temperature: 115o-160oF (46o-71oC)
If coating is not removed completely repeat step 1.
3rd STEP :::
For Cleaning Engine Blocks or Heavily Greased/Soiled Equipment:
1. Repeat step 1 above. The solution may be diluted to increase penetration. Let the product sit for 5-20 minutes.
2. Repeat step 2 above.
3. Repeat process as necessary until greased/soiled equipment is clean.
Technical Information
| Appearance: White Viscous | Solubility: Excellent | |
| Density: > 1 | pH Level: Neutral | |
| Odor: Sweet Smell | Foaming: Low | |
| Flash Point: None To Boiling Point |
Stability: Stable |
Material Safety
Avoid contact with skin and eyes. For contact with skin, flush with water. For contact with eyes, flush with water for 15 minutes and seek medical attention. If swallowed drink two glass of water and induce vomiting. Seek immediate medical attention. After vomiting, give water, milk or solution of sodium bichromate in water (1 teaspoon per quart). Do not give anything to an unconscious or convulsing person. Caution, contains heavy aromatic naphtha.
| Product Name | DEGREASER VOLC Mullti Clean |
| Product Type | Tank and Industrial cleaner |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Faty alcohal ethoxylate |
Mix |
|
|
22-36/38 |
Xn |
*See Section 16
|
Environmental Hazards |
None |
|
Human Health Hazards |
Moderates |
|
NOTE |
Person-related safety precautions |
|
After inhalation |
On Inhalation move to fresh air / Arificial respiration . Get medical attention. |
|
After skin contact |
Instantly wash with water and soap and rinse thoroughly. Generally Non Irritating , Protective clothing require. |
|
After eye contact |
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor. |
|
After swallowing |
Harmful, if ingested,Do not induce Vomiting. Get medical attention. |
Extinguishing Media:-
|
A. Suitable Foam |
dry Co2, water spray |
|
B. Not suitable |
Not applicable |
|
C. Special |
Not applicable |
|
|
Do not use Direct water jet |
|
Protection of fire |
Fighter Masked with Air Respirator |
Care for environmental protection Prevent material from reaching sewage system, holes and cellars. Dilute with much water.PROCEDURE for cleaning/collecting Remove RXSOL VOLC with absorbent materials or mechanically .And dispose accordance with section ,Then flush with water and ventilate well.NOTE Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
|
Handling |
Eyewash facilities require at workplace. |
|
Storage |
General Storage , container should be tightly. |
|
Methods of cleaning |
Flush Spill Area with Water. |
|
Note |
Keep Container Tightly Closed. |
|
Enviromental Precaution |
Readily Bio-Degradable , missible with water , low toxicity , No environmental problem on correctly usage. |
|
Personal Proctection |
|
|
Respiratory System Protection |
Breathing equipment Not required |
|
Eye Protection |
wear eye protection (on possibility of contact) |
|
NOTE |
The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. |
|
Wash hands during breaks and at the end of the work. Avoid contact with the eyes and skin.Keep away from foodstuffs, beverages and food. |
|
|
Protection of hands |
Protective gloves |
|
Eye protection |
Tightly sealed safety glasses |
PRODUCT PROPERTIES:-
|
Appearance |
Clear liquid / Low viscous |
|
|
Odour |
Characteristic / Odorless |
|
|
Density |
In g/cm3 at 15°C: 1.00 |
NOTE : SHELF LIFE 10 YEARS |
|
Boiling Point |
MATERIALS BOILS AT 100°C |
EFFICIENCY : |
|
Compatibility |
|
A . SEA WATER 68% |
|
Metal: |
No known effect |
B. FRESH WATER 78% |
|
pH |
6 +0.5 |
B . FRESH WATER 98.8 % |
|
Packaging |
Order No.: |
Size (in litres) |
|
|
RXSOL-20-2028-025 |
25 , 30 , 210 |
|
TOXICITY LC50 (After 96 hours ) |
IN CONCENTRATE 4460 PPM SLIGHT TOXIC. |
IN DILUTE 9800 PPM PRACTICALLY NON TOXIC . |
|
Condition to Avoid |
Heat, Flame & Other Sources of Ignition |
|
Materials to Avoid |
Do not subject to Reducing /Oxidizing Agents. |
|
Hazardous Decomposition Products |
Do not occur |
|
NOTE |
No decomposition if used according to specifications |
|
Skin Irritation |
Irritant wash with soap water |
|
Eye Irritat |
Moderate irritant , flush with copious amounts of water |
|
Sensitization |
Not Sensitizing . |
|
(All above information as per data available with us) |
|
|
Comment |
Not applicable |
|
Ecotoxicity |
Not applicable , Readily biodegradable |
|
Water hazard class 2 (self-assessment) |
Hazardous for water. |
|
Do not allow product to reach ground water, water bodies or sewage system..Danger to drinking water if even small quantities leak into soil. |
|
This material must be disposed with local national regulations. Product Recommendation Can be burnt under adherence to the necessary technical regulations. Disposal must be made according to official regulations.
Marine pollutant: No.Transport/Additional information Not Dangerous
Hazard designation of product: Xi Irritant.
Irritating to eyes and skin.
Safety phrases
2Keep out reach of children
If swallowed, seek medical attention immediately
26In case of contact with eyes, rinse immediately with plenty of water and
seek medical attention.
27After contact with skin, wash immediately with plenty of water and soap and rinse thoroughly.
4.National regulations
These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. Department issuing data specification sheet Environment protection department.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.