Alkaline powerful new generation ship holds cleaning product. Its chemical strength is more superior then AQUAATUFF Ship Hold Cleaner high foam. Very effective emulsifier - based cleaner with high foam for use in hold cleaning and general degreasing. its heavy molecular surfactants rapidly react with water and produce effective cleaning solution. May be applied by brush, hand spray and by high and low-pressure washing machines.
It is a heavy duty non-corrosive concentrated cleaning compound soluble in fresh and salt water, also suitable for high-pressure cleaning machines. Ideal for difficult cleaning problems faced in industrial and other plants, Very effective degreaser which removes dirt, oil and grease from the equipment, parts, components, engines, floors and walls etc.
20-50 % with fresh water . Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition Use Undiluted from to 20-50% diluted with water.
Medium soil deposition 10-20% diluted with water.
Light Soil ( general degreasing ) 5-10% diluted with water.
RX TUFF HIGH FOAM LIQUID - HD (RXSOL-22-3002-HF)
The Importance of RX Tuff by High-Pressure Cleaning
The job of high-pressure cleaning can be done easier & quicker by simply using RX Tuff incorrect dosages. Using a high-pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:
Step 1: Spraying the RxTuff over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet.
After the RxTuff has been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the RxTuff thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of RxTuff substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of RxTuff incorrect dosages is half the job done.
3 Pieces of Good Advice:
Apply RxTuffon dry surface where possible! A dry surface will absorb far better than a wet surface. When applying RxTuff on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RxTuff may produce "channels" down the surface, thereby running too fast off the surface. During high-pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RxTuff will give the best effect.
Product Description:-RxTuff is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of metals. It is the low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents, Biodegradable and minimizes the extreme hazards to personnel in handling materials.
Applications:-RxTuff Suitable for cleaning engine components like fuel and Lube oil filters, Injection nozzles, pump components, inlet and exhaust valves & primarily refers to cleaning of hard surfaces, such as Decks, Tanks, Engine-rooms, etc. can be used for all types of cleaning and degreasing and may be applied by brush, handspray, high and low pressure washing machines etc.
Directions for Use and Dose Rates:
General Cleaning:- RxTuff can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination RxTuff should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of RxTuff to a bucket of water. The rxtuff solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the RxTuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, RxTuff is not recommended for washing machines.
Tank Cleaning:-Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes & Soot from inert gas systems.
Method of Application and Dose Rates:-
- Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
- Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
- Spot cleaning. Hand spray neat or diluted with up to 5 parts water and leave for several minutes before rinsing off with clean water.
Cleaning of Cargo Tanks to Remove Soot from Inert Gas Systems:-
- Spray RxTuff on with a high-pressure cleaning machine and use 1:6 with water. If used with the hand sprayer, spray the product neat onto the surface, allowing 1 lit. for every 12 m2. Use a 5-8% solution in a tank washing machine.
- Leave for about 30-45 minutes. The surface should be kept wet.
- Wash down with hot water (80°C) and check the cargo tank.
- Repeat the procedure if necessary.
Note:- Whenever possible, the cleaning solution should be heated to 60-80°C.If this method is not possible, other conventional methods such as separate rate direct injection, recirculation or hand spraying provide acceptable options.For boiler fire side cleaning, a 10-20 % hot solution, (temp. above 40°C), should be sprayed on to the surfaces to be cleaned. Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary.
Technically strength of cleaner is directly depended up on the percentage of active ingredients and emulsification power. RX TUFF developed by our team to works and perform as leader in ship hold cleaning chemicals. Our comperative study with AQUAATUFF Ship Hold Cleaner high foam we observed that in many cases RX TUFF perform much better and powerful.
RXTuff is most powerful alkaline ship hold cleaning chemicals. Its higher concentration always resulting optimum result than other alkaline cleaners. RXTUFF have all chemical properties of Aqautuff but due to the presence of some additional alkaline surfactant its cleaning action and solvency properties sharply increases.
For degreasing and removal of residues of mimerals oil , coal stain and soot from surface.
Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
| Product Name | : | RXSOL-22-2214-025 |
| Product Type | : | RX TUFF HIGH FOAM |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | : | +91 22 65113333 / 5555 / 9999 |
| Fax | : | +91 22 2781 1318 :::AOH :0091 9821214367 |
| : | care@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Potassium hydroxide |
5-10% |
1310-58-3 |
215-181-3 |
35 |
C |
|
2-butoxy ethanol |
1-5% |
111-76-2 |
203-905-0 |
X |
|
|
Fatty alcohol ethoxylate |
5-10% |
34398-01-1 |
500-084-3 |
41 |
|
| Sodium Meta Silicate | 4-6% | 6834-92-0 | 100-027-193 | ||
| Disodium cocoamphodiacatate | 1-5 | 68650-39-5 | 272-043-5 | 36 Xi | |
| Cocamide DEA | 1-5 | 68603-42-9 | 271-657-0 | ||
|
Non classified ingredients |
60-70 |
|
|
|
|
|
Odour |
Odourless |
|
Appearance |
Liquid, colourless, soluble in water |
|
Contact with eyes |
Corrosive to eyes, Can cause damage to the eyes |
|
Contact with skin |
Causes burns (R35) |
|
Inhalation |
No information available but must be considered harmful |
|
Ingestion |
Harmful if swallowed (R22) |
|
Contact with skin |
Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water.Seek medical advice if necessary |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes.Irrigate eyes thoroughly whilst lifting eyelids.Obtain immediate medical attention. Continue flushing with water until medical help arrives. |
|
Ingestion |
Do not induce vomiting.Never give anything by mouth to an unconscious person.Give water or milk to drink.Obtain immediate medical attention. |
|
Inhalation |
Seek medical attention if ill effects occur |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) When in doubt or symptoms persist, seek medical attention |
Non combustible. Smoke from fires is corrosive. Not flammable. In case of fire use extinguishing media appropriate to surrounding
conditions. Vapour density - not applicable.
|
Personal Precautions |
Wear protective clothing as per section 8 |
|
Environmental Precautions |
Do not allow to enter public sewers and watercourses |
|
Clean Up Actions |
Absorb spillage in inert material and shovel up.Ventilate the area and wash spill site after material pick-up is complete Neutralise with Acid |
|
Special Precautions |
Wear protective clothing as per section 8 |
|
Handling |
Eyewash bottles should be available.See Section 8. |
|
Storage |
Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from frost. |
|
Exposure Limits |
OES / LTEL # ppm 2 mg/m3 (Sodium hydroxide). |
|
Exposure controls |
No special ventilation is required unless the product is used in a spray form. |
|
Occupational exposure controls |
Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) During fumigation/spraying wear suitable respiratory equipment (S42). |
Gloves Suit. Goggles No_Smoking
|
Odour |
Odourless |
|
Appearance |
Liquid, colourless to yellow, soluble in water |
|
pH |
11.5 - 12.5 at 0.1 % concentration, pH 13 - 14 at 100 % concentration |
|
Boiling point |
>100 °C at 760 mm /Hg |
|
Vapour pressure |
not known |
|
Vapour density |
not applicable |
|
Freezing point |
5 °C at 760 mm/Hg |
|
Completely soluble in water |
|
|
Specific gravity (water=1) |
1.23 |
|
Non combustible |
|
- This article is considered stable under normal conditions
- Avoid overheating, Keep away from frost
- Incompatible with acid
- See Section 5
|
Toxicological information |
No experimental data available. |
|
Inhalation |
Can cause damage to the respiratory system. |
|
Contact with skin |
Causes severe burns (R35). |
|
Contact with eyes |
Causes severe burns (R35). |
|
Ingestion |
The ingestion of significant quantities may cause burning sensation.The ingestion of significant quantities may cause damage to digestive system. |
|
Carcinogenicity |
No evidence of carcinogenic effects. |
|
Ecotoxicity |
This product has been evaluated on its behaviour in the environment by "The TNO Institue of Environmental Sciences" (The Netherlands organisation for applied Scientific Research).Their conclusion on this product reads: "In general, this cleaning agent poses little danger to the environment, its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable." Based upon their report, IMO's BCH Working Group on the Evaluation of Safety and Pollution Hazards approved this product for use as tank cleaning agent by chemical tankers. |
|
Mobility |
Completely soluble in water |
|
Persistence and Biodegradability |
Its main ingredients will either dissolve rapidly and dissociate in water or are readily / inherently biodegradable. |
|
Bioaccumulation Potential |
Bioaccumulation of the components in this product is insignificant. |
|
Other Adverse Effects |
May cause acute effects in the environment.No environmental problems are expected when the product is used / handled correctly. In its intended use, the product will not be released into the environment. |
|
Classification |
This material and/or its container must be disposed of as hazardous waste. EU Waste class: 06 02 02 |
|
Disposal considerations |
Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation |
| Proper Shipping Name | HYDROXIDE, SOLUTION | |||
| UN | ||||
| Proper Shipping Name | Potassium hydroxide, solution | |||
| UN NO | 1824 | |||
| Hazard Class | 8 | Packing Group | II | |
| Road/Rail (ADR/RID) | ||||
| Proper Shipping Name | Potassium hydroxide, solution | |||
| ADR UN No | 1824 | |||
| ADR Hazard Class | 8 | Termcard | 80S1824 | |
| Sear (IMDG) | ||||
| Proper Shipping Name | Potassium hydroxide, solution | |||
| IMDG UN No | 1824 | |||
| IMDG Hazard Class | 8 | IMDG Pack Group | II | |
| IMDG EmS | F-A, S-B | IMDG subrisk | NA | |
| IMDG Labels | IMDG Flash point | N/A | ||
|
Air(ICAO/IATA) |
||||
| Proper Shipping Name |
Potassium hydroxide, solution |
|||
| ICAO UnNo | 1824 | |||
| ICAO Hazard Class | 8 | ICAO Packing Group | II | |
| ICAO subrisk |
N/A |
ICAO Labels | 8, CAO | |
| ICAO Flash point |
N/A |
|||
| DOT/CFR(US Department of Transportation | ||||
| DOT Proper Shipping Name | Potassium hydroxide, solution | |||
| Hazardous Material | Potassium hydroxide | |||
| Hazard Class | 8 | Identification Number | ||
| Product RQ (lbs) | 3640 | DOT subrisk |
N/A |
|
| DOTLabels | 8 | DOTFlashpoint | N/A | |
- Forbidden on passenger aircraft
|
Risk Phrases |
Non Corrosive |
|
Safety Phrases |
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, eye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). |
(R35: Causes severe burns. R41: Risk of serious damage to eyes.) The information provided about the product on this Safety Data Sheet has
been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety
Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties
The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage
in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.