Tiles And Grout Cleaner Restoration

Renews your tile and grout, This industrial strength cleaner will remove embedded mineral deposits and carbonaceous soils such as rust, calcium, urine stains, soap scum and efflorescence from man made tile and cement grout.

Highly concentrated cleaner, When normal cleaning procedures are not enough to restores ceramic tile and grout. This product renews your tile and grout Restoration Tile.  This industrial strength acid cleaner will remove embedded mineral deposits and carbonaceous soils such as rust, calcium, urine stains, soap scum and efflorescence from man-made tile and cement grout. Can be used to etch hard-to-clean grout by removing a super fine layer, leaving your grout sparkling bright and clean. 

Blended with latest emulsifier technology formulation with corrosion inhibitors. 
 

Application
  • Safe and biogradable; produces no hazardous vapors
  • Can be used as an etching material for masonry and marble
  • Removes Embedded Mineral Deposits and Carbonaceous Soils
  • Low Foaming, Low VOC Formula
  • Commercial and Residential Use
Dose

Coverage: One Ltrs diluted solution will covers 120 sf per area.

Dilution:  50 ml  - 250 ml can be dilutedwith water to make 1 Ltr solution.

The product is easy to mix (1 part water/1 part cleaner), and can be applied it to the grout with a small scrub brush. Applying it to one area at a time, then clean with wet sponge, later followed by a quick mopping.  Tiles & grout will give full strength of shine and cleaning effect.

Additionals USES :::

Also can be use for cleaning of  fiberglass shower, This product Effectively cleans grease, hard water/lime/stains Highly recommend to clean up fiberglass showers!

pH: <1.0 pH ready to use

Coverage: One gallon makes up to 17 gallons of ready to use solution for approximately 400 sf per diluted gallon.

Dilution:  8 - 32 oz. per 1 Gallon of Water

 
Technical specifications

pH: <1.0 pH ready to use

Note

Not recommended for use on most natural stone.

 

Other Same family Products :::

1) Tiles And Grout Cleaner  ( Restoration ) ::: http://rxmarine.com/Tiles-Grout-Restore-Cleaner

2) Porcelain Bowl Tiles Cleaner ( Brute Thick ) ::: http://rxmarine.com/Porcelain-Bowl-Tiles-Cleaner

3) Ceramic Tiles Mosaic Stain Remover ::: http://rxmarine.com/Ceramic-Tile-Mosaic-Floor-Stain-Remover

5) Tiles Grout Alkaline Cleaner ::: www.rxmarine.com/Tiles-Grout-Alkaline-Cleaner

6) StoneTiles Cleaner Wipes ::: http://rxmarine.com/Stone-Tiles-Cleaner-Wipes

7) Tiles Cleaner ::: http://rxmarine.com/Tile-Cleaner

MSDS
 

Product Name

Tile And Grout Cleaner  Restoration

Product Type RXSOL-41-8685-025

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540
Fax +91 22 2781 1318 :::AOH :0091 9322594669
Email mail@rxmarine.com

Ingredients:
CAS # Percentage Chemical Name
506-89-8 60% Organic Salt
111-76-2 2% Ethylene glycol monobutyl ether
OSHA Regulatory Status:
This SDS contains valuable information critical to the safe handling and proper use of this product. This SDS should be
retained and available for employees and other users of this product.

Route of Entry:Eyes; Skin; Inhalation; Ingestion;

Target Organs: Eyes; Skin;

Inhalation:Minimal respiratory tract irritation may occur with exposure to a large amount of material

Skin Contact:May Cause Irritation.

Eye Contact: May Cause Irritation.

Ingestion:Small amounts swallowed incidental to normal handling operations   are not likely to cause injury; swallowing amounts larger than that may cause temporary injury.

 HMIS III-ratings (scale 0-4): Health = 1, Fire = 0, Physical Hazard = 0

Inhalation: If symptoms develop, move victim to fresh air. If symptoms persist, obtain medical attention.

Skin Contact: Wash with soap and water. If irritation persists consult medical personnel.

Eye Contact: Immediately flush eyes with large amounts of water for at least 15 minutes, lifting eyelids

occasionally to facilitate irrigation. Get immediate medical attention.

 Ingestion:If swallowed, DO NOT induce vomiting unless directed to do so by medical personnel. If injured party is conscious, give two glasses of water. Seek medical attention.

Flash Point: >212ºF

Flash Point Method:Closed Cup

Wear self contained breathing apparatus and other protective clothing. Use any standard agent - choose the one most appropriate for type of surrounding fire.

Keep away from drains and ground water. Keep all unnecessary personnel away. Spill area may be slippery. Pick up excess with inert absorbant material and place into separate waste container. Ventilate Area and Wash Spill Site After Material Pickup is Complete. Consult an expert on disposal of recovered material and ensure conformity to local disposal regulations.

Handling Precautions:  Avoid contact with eyes, skin, or clothing; Consider normal working hygiene. Handle with care and avoid spillage on the floor (slippage). Keep away from sources of ignition; wash  thoroughly after handling.

Storage Requirements: Store out of reach of children; keep container closed; store in a cool well-ventilated place away from strong oxidizing or alkaline product.

Engineering Controls:     Normal room ventilation is satisfactory for limited use.

Protective Equipment:     HMIS PP, X Consult your supervisor for special instructions

                  

Appearance:

 Clear Amber                 

 Boiling Point: N/D
Physical State:  Liquid

Freezing/Melting Pt.:

N/D
Odor:                            Sharp acidic   Solubility:  Soluble
pH:         1 Spec Grav./Density:  9.43
Vapor Pressure:   N/D    

Vapor Density:

 N/D    

                                                         

 Stability:Product is stable under normal conditions.

Conditions to avoid:None Known

Materials to avoid (incompatability):None Known

Hazardous Decomposition products:Exposure to fire may liberate carbon dioxide, carbon monoxide, organic acids, and other unidentified thermal decomposition products from this product or itspackaging.                                                                               

Hazardous Polymerization: Will not occur.

 Route of Entry: Eye contact, and Skin absorption/contact

Effects of Acute Overexposure to Product:

Eye Contact: Causes eye irritation, redness, tearing and blurred vision

Skin Contact: Causes skin irritation, defatting and dermatitis

Inhalation: Inhalation of mist or vapor may cause temporary respiratory irritation; temporary central nervous system

effects including dizziness, weakness, fatigue, nausea, and headache.

Ingestion: May cause temporary gastrointestinal irritation with nausea, vomiting and diarrhea.

None of the components in this product are listed by NTP, IARC or OSHA as a carcinogen.

Refer to Section 6 for information regarding accidental releases and Section 15 for regulatory reporting information

 Dispose of in accordance with local regulations.

Refer to bill of lading or container label for DOT or other transportation hazard classification. Ship in accordance with 49 CFR parts 100-185.

COMPONENT / (CAS/PERCENT)/ CODES
*Organic Salt (506898 60%) TSCA
*Ethylene glycol monobutyl ether (111762 2%) MASS, OSHAWAC, PA, TSCA, TXAIR, WHMIS
REGULATORY KEY DESCRIPTIONS
 All components are listed on TSCA
MASS = MA Massachusetts Hazardous Substances List
OSHAWAC = OSHA Workplace Air Contaminants
PA = PA Right-To-Know List of Hazardous substances
TXAIR = TX Air Contaminants with Health Effects Screening level
WHMIS = Workplace Haz Mat Info Sys Canada

This document is prepared in accordance with 29 CFR 1910.1200. The purpose of this section is to ensure that the hazards of all chemicals produced or imported are evaluated, and that information concerning their hazards is transmitted to employers and employees.

All information appearing herein is based upon data obtained from the raw material manufacturer and/or recognized technical sources. While the information above is believed to be true and accurate, the author makes no representations as to its accuracy or sufficiency. Conditions of use are beyond the manufacturer's control; therefore the users are responsible to verify this data under their own particular conditions, applications and regulations to determine if the product is suitable for their particular purposes. The users assume all risks of product use, handling, disposal, reliance upon, publication or use of the information contained herein. This information applies only to the product designated above and does not necessarily apply to its use in combination with other materials, products, chemical compounds, structures or processes.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@mumbaichemical.com