Rust Remover manufacturer, supplier and exporter. Rust remover is advanced blend of various acid with additional base and inhibitor. Its powerful chemical rust removal action dissolves rust without any mechanical action. This is the reason why Rust Remover is so popular for removal of rust before painting.
Very effective products to removes rust and stains also improves metal appearance.
Direction for use
For rust removal the surfaces to be treated should be free form loose materials, flaking paint, dirt or oil. In most cases diluted solution of RXSOL-16-1088-025 , can be applied by brush ranging from 10-50% and left to react for 5 - 40 minutes then the residues should be rinsed off thoroughly with clean water jet . Smaller objects can be soaked in plastic container. After cleaning, rinse items thoroughly with a water jet.
• For aluminium , only diluted solution up to 10 - 25% can be used and rinse with in 10- 30mins.
• For stainless Steel Disc Cleaning (never use on copper, brass or bronze parts), dilute to 4 - 10 parts water, and immerse from 1 - 3 hours depending on the severity of the job concerned. Cleaning will be accelerated with elevate4d temperatures up to 60°C and agitaion. After cleaning rinse thoroughly with clean water.
For best performance on aluminium use RXSOL Degreaser for degreasing as it has a neutral pH. Paintwork :
RXSOL-16-1011-RR should be diluted with water 1:4 . Then solution can be applied by brushing, spraying for 10 - 20 minutes the residues should be rinsed off thoroughly with high pressure water.
On completion of degreasing CLEANING OPERATION if rust / scale ( water ) stains from metal surface ,use 10 to 50% of RXSOL-16-1088-025 with fresh water for 20 -30 minutes.
Appearance : Clear & Colourless fLiquid
Specific gravity (200C) : 1.21
Flash point cc : None
Note : Also can be used for Disc cleaning without dismantling Disc Stacks
: Improves efficiency of centrifuge installation.
RXSOL is pioneer to manufacture Rust Remover. RXSOL brand rust remover is highly concentrated and full strength of material to remove rust from metal surface. Our compnay name is popular as a rust remover supplier in Mumbai, Chennai, Kolkata, Gandhidham, Mundra, Kandla, Sikka, Surat, Goa, Manglore, Vizag - Visakhapatnam, Chennai, Ennore, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi, Middle East, Gulf, Turkey, Istanbul, USA.
Pl. refer this link for our various location details...
you may click below to get all location details :::
For Tamilnadu - http://ennoreindiachemicals.
For Andhra Pradesh - http://vizagchemical.com/
For East Coastal - http://eastindiachemicals.
For Gujrat Port - http://westindiachemical.
For Mumbai Port - http://marinechemical.in/
For JNPT - GOA - Manglore port - http://rxchemicals.com/
For Middle East - Gulf - http://www.dubichem.com/
This is a well balanced blend of corrosion inhibitors , and surface active highly emulsified acidic materials product for the cleaning of aluminium, copper and removal of rust stains on paint work.
Do not eat, drink or smoke while handling it; wash carefully with soap and water before meals and after work shift as shower is recommended.
R 34 : Causes burns.
S 26 : On contact with eyes,Wash eye ball immediately with plenty of water and seek medical advice.
| Product Name | RXSOL-22-1088-500 |
| Product Type | RUST REMOVER |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
Ethoxylated Fatty alcohol, Phosphoric Acid and Long chain Detergent remaining which is not in the list of hazardous materials .
Human Health Hazards R 34 : Causes Burns
Keep away from food, children , animal .
|
Inhalation |
No fumes but after inhalation medical attention require |
|
Skin Contact |
In case of contact with skin , wash immediately with plenty of water and soap Remove contaminated clothes. |
|
Eye Contact |
Flush with running water for at least 15 minutes Immediately medical attention require. |
|
Ingestion |
Seek medical attention , try to drink more plenty of fresh water. |
Non combustible product
|
Suitable |
Not known , on direct exposure to heat dangrous emission of gas of COx SOX can be released |
|
Not suitable |
Not applicable |
|
Special |
Not applicable |
|
Protection of fire Fighter |
Not applicable |
|
Precaution for fire fighters |
Wear protective equipment with breathing apparatus. |
|
Enviromental Precaution |
Before flowing into drainage system, surface or ground water First of all neutralize with alkaline materials like lime powder for pH balancing between 6-10. |
|
Cleaning Method |
Flush Spill Area with Water and avoid contact with skin and eye. |
|
Condition to Avoid |
Non flammable but avoid direct heating |
|
Materials to Avoid |
Do not subject to ALKALINE medium. |
|
Handling |
Keep Container Tightly Closed |
NOTE :
Eyewash facilities require at workplace The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treat- ment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com
• Dilute in water (always use plastic jar and RXSOL should be added to water never add water to RXSOL.)
Personal protection:
|
Eye Protection |
Strictly wear eye protection |
|
Hand protection |
Wear PVC chemical resistance protective gloves |
|
Appearance |
Clear liquid |
|
Density |
g/cm3 at 15°C: 1.5 |
|
pH |
10% solution 1.5-2.5 |
|
Flash Point |
Not applicable |
|
Compatibility |
|
|
Metal |
Concentrate and long touch may corrode. |
|
Rubber |
No known effect |
Decomposition Products: Do not occur hazard if stored and used as directed. In FIRE combustion CO, CO2 , NH3 , SOX etc hazardous gas produced.
NOTE : AVOID CONTACT WITH ALKALINE SUBJECT.
|
Skin Irritation |
Cause severe irritation |
|
Eye Irritat |
Cause severe irritation |
|
Sensitization |
Cause Sensitizing |
|
Chronic Toxicity |
Not Identified |
|
Carcinogencity |
No |
RXSOL-16-1088-025 is degradable and due to highly acidic in nature must be neutralized as per guidance and ingridents used in it.
As per guide line, Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treat- ment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required.
|
Transport over land ADR/RID |
1805 8/11c 8/11c |
|
Transport over inland waterways ADN/ADNR |
|
|
Transport over sea IMDG |
8 |
|
Transport by air ICAO/IATA |
8/1805 |
|
Phosphoric acid |
|
|
sea |
EMS 8-08, MFAG 700 PG III |
Classification and labelling according to 4. Novelle Gefahrstoff-Verordnung Symbols of danger :C Corrosive Ingredients : Phosphoric acid R-phrases :
|
R34 |
Use Hand gloves , Cause burns |
|
S-phrases |
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. |
|
S26 |
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. |
|
S45 |
In case of accident or if you feel unwell, seek medical advice immediately |
National prescriptions : Self classification on the basis of component assessments or analogy conclusions without addition/subtraction of points
for good/poor biodegradability etc.
This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe
our products from the point of view of safety requirements and is not intended to guarantee any particular properties.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.