RODINE Sol

The product is recommended for use in hydrochloric acid, hydrofluoric acid, HCl/HF mud acids and organic acids.
Category

RODINE Acid Corrosion Inhibitor IC-600 is a highly effective broad spectrum acid corrosion inhibitor designed for use in well acidizing, acid fracturing and industrial cleaning operations. The product is recommended for use in hydrochloric acid, hydrofluoric acid, HCl/HF mud acids and organic acids. RODINE Acid Corrosion Inhibitor IC-600 provides excellent corrosion protection of surface and down hole tubular goods and associated equipment typically used in acidizing operations and has proven effective at temperatures up to 350oF. IC-600 does not contain any organic halides or heavy metals known to be harmful to process equipment or refinery catalysts.

Application
Recommended Application :
RODINE Acid Corrosion Inhibitor IC-600 should be added to the acid of choice and thoroughly mixed. Required load rates are dependant upon acid concentration and type, down hole temperature, the presence of other additives and the length of time the acid will be in contact with the tubulars. General loading rates for hydrochloric acid with J-55 steel is presented in the chart below. Pilot testing is recommended to determine optimum IC-600 loading in specific treatments. At temperatures in excess of 250oF in 15% HCl and in excess of 225 oF in 28% HCl and 12-3 mud acid the use of formic acid as an intensifier is recommended. 
Dose

Recommended load rates :

Temperature oF      
15% HCl
gpt AI-260
28% HCl
gpt AI-260 
<150  1 Gallon  4 Gallons
150 – 175  2 Gallons 6 Gallons
175 - 200 4 Gallons 10 Gallons
200 - 250 4 Gallons 12 Gallons
250 – 300 6 Gallons  15 Gallons
300 – 350 10 Gallons  20 Gallons
 
Technical specifications

 

 
Typical Properties :
Property      Value
Density, lbs/gal  68°F (20°C)  
8.6 lb/gal.
Pour Point °F -30
Ionic Charge Cationic
pH 2.5-3.5
15% HCl Soluble
Solubility ,Water  Soluble
Hydrocarbon Dispersable
Appearance liquid

 

Note
Shipping, Handling and Storage :
RODINE Acid Corrosion Inhibitor IC-600 is available in 55 gallon drums, tote tanks and bulk tank wagons. As with any industrial chemical, keep out of reach of children and avoid prolonged contact with skin and eyes. In case of skin or eye contact, flush the exposed area with copious amounts of water. A material safety data sheet outlining proper handling of this product is available upon request, or will be forwarded upon the purchase of the product.
MSDS

Porduct Name               RODINE Sol IC600
Part Number   RXSOL-25-1098-050 

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA  

Phone +91 22 20871200 - 1400
Fax +91 22 27612100 :::AOH :0091 9821214367
Email mail@rxmarine.com
Website www.rxmraine.com

Hazardous Component(s)         Cas No                         Whight %                        
2-Butoxyethanol 111-76-2 30 - 50
Alcohols, C16-18 and C18-unsatd., Ethoxylated
68920-66-1  10 - 30
Acetic acid, hydroxy compds. with acetophenone-formaldehyde-
(1R,4aS,10aR)-1,2,3,4,4a,9,10,10 aoctahydro-1,4a-dimethyl-7-(1-methyle
683748-05-2 10 - 30
2-Propyn-1-ol, compd. with 2- methyloxirane 38172-91-7 5 - 10
Acetophenone 98-86-2 0.1 - 1
Glycolic acid 79-14-1 0.1 - 1

Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

 
Precautionary Statements
 
Prevention Keep away from heat, sparks, open flames, hot surfaces - no smoking. Wash affected area thoroughly after handling.
Do not eat, drink or smoke when using this product. Wear protective gloves, eye protection, and face protection.
Response
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN: Wash with plenty of water.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. If skin irritation occurs: Get medical attention. Take off contaminated clothing.
In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
Storage  Store in a well-ventilated place. Keep cool.
Disposal Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Inhalation If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Skin contact Remove contaminated clothing and footwear. For skin contact, flush with large amounts of water. Seek immediate medical attention.
Eye Contact  In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Ingestion Get immediate medical attention. Do not induce vomiting.
Symptoms See Section 11.
Notes to physician Treat symptomatically and supportively.

Extinguishing media Foam, dry chemical or carbon dioxide. Water may be an ineffective extinguishing medium.
Special firefighting procedures Wear full protective clothing. Wear self-contained breathing apparatus.
Unusual fire or explosion hazards Do not cut, weld, solder, drill, grind, or expose containers to heat, flame, sparks, or other sources of ignition.
Hazardous combustion products Irritating and toxic gases or fumes may be released during a fire.

Environmental precautions Wear appropriate protective equipment and clothing during clean-up. Prevent further leakage or spillage
if safe to do so. Eliminate all sources of ignition or flammables that may come into contact with a
spill of this material. Do not allow product to enter sewer or waterways.
Clean-up methods Absorb spill with inert material. Shovel material into appropriate container for disposal.
Dispose of according to Federal, State and local governmental regulations.

Handling Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only. Ground and bond all equipment as required (when transferring products). 
Storage For safe storage, store between 50 °F (10°C) and 104 °F (40°C) Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Do not pressurize, cut, heat or weld containers. Empty product containers may contain product residue. Do not reuse empty containers.

Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure controls and protective equipment for each task performed. 

Hazardous Component(s)         ACGIH TLV                     OSHA PEL                   AIHA WEEL           OTHER          
2-Butoxyethanol 20 ppm TWA
50 ppm (240
mg/m3) PEL
    (SKIN)
None None
Alcohols, C16-18 and C18-unsatd.,
ethoxylated
Alcohols, C16-18 and C18-unsatd., ethoxylated
None None None None
Acetic acid, hydroxy-, compds. with acetophenoneformaldehyde-(1R,4aS,10aR)-1,2,3,4,4a,9,10,10aoctahydro-1,4a-dimethyl-7-(1-methyle None None None None
2-Propyn-1-ol, compd. with 2-
methyloxirane
None None None None
Acetophenone 10 ppm TWA None
10 ppm (50
mg/m3) TWA
None
Glycolic acid None None None None

 

Engineering controls Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product.
Respiratory protection If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.
Eye/face protection Wear chemical goggles; face shield (if splashing is possible).
Skin protection Wear impervious gloves for prolonged contact. Gloves should be tested to determine suitability for prolonged contact. Use of impervious apron and boots are recommended.

Physical state Liquid
Colour Amber
Odour Aromatic
Odor threshold Not available
pH 3.5 - 5.0 (1% solution)
Vapor pressure 20 mm hg (20 °C (68°F)) calculated
Boiling point/range > 200 °F (> 93.3 °C)calculated
Melting point/ range 0 °F (-17.8 °C
Specific gravity 0.98 - 1.00 at 68 °F (20°C)
Vapor density Not determined
Flash point 189 °F (87.22 °C) Tagliabue closed cup
Flammable/Explosive limits - lower  Not applicable
Flammable/Explosive limits - upper Not applicable                    
Autoignition temperature Not determined
Flammability Not applicable
Evaporation rate Not determined
Solubility in water Complete
Partition coefficient (n-octanol/water)  Not determined
VOC content 45.9 % EPA Method 24
Viscosity Not available
Decomposition temperature Not available

Stability               Stable at normal conditions.
Hazardous reactions None under normal processing
Hazardous decomposition products Upon decomposition, this product may yield oxides of nitrogen and ammonia, carbon dioxide, carbon monoxide and other low molecular weight hydrocarbons.
Incompatible materials This product may react with strong oxidizing agents. This product may react with strong reducing agents. This product may react with strong alkalies.                                                                           
Reactivity
Not available.
Conditions to avoid Store away from incompatible materials.

Relevant routes of exposure Skin, Inhalation, Eyes
Inhalation This product is irritating to the respiratory system. Repeated inhalation may be harmful; lung irritation and serious central nervous system disorders may result. Excessive inhalation of this material causes headache, dizziness, nausea and incoordination.
Skin contact Contact with liquid may produce severe skin irritation including redness and inflammation. A component in this product may be absorbed through the skin, especially if skin is damaged.
Eye contact Contact can cause moderate to severe irritation and possible injury to the eyes. Symptoms may include stinging, tearing, redness, swelling, and blurred vision.
Ingestion Ingestion can cause gastrointestinal irritation, nausea, vomiting and diarrhea. May be harmful or fatal if swallowed.
Hazardous Component(s) LD50s and LC50s  Immediate and Delayed Health Effects                                       
2-Butoxyethanol
Oral LD50 (Rat) = 560 mg/kg
Oral LD50 (Mouse) = 1.2 g/kg
Oral LD50 (Rabbit) = 0.32 g/kg
Oral LD50 (Rat) = 1.48 g/kg
Oral LD50 (Mouse) = 1,519 mg/kg
Dermal LD50 (Rabbit) = 400 mg/kg
Inhalation LC50 (Rat, 4 h) = 523 ppm
Inhalation LC50 (Rat, 4 h) = 545 ppm
Blood, Central nervous system, Irritant,
                     Kidney, Liver
Alcohols, C16-18 and C18-unsatd., ethoxylated  Inhalation LC50 (Rat, 4 h) = > 1.6 mg/l Allergen, Irritant, Kidney
Acetic acid, hydroxy-, compds. with
acetophenone-formaldehyde-
(1R,4aS,10aR)-1,2,3,4,4a,9,10,10aoctahydro-1,4a-dimethyl-7-(1-methyle
None No Records
2-Propyn-1-ol, compd. with 2- methyloxirane                         None                       No Data
Acetophenone
Oral LD50 (Rat) = 0.81 g/kg
Oral LD50 (Rat) = 3.0 g/kg
Blood, Central nervous system, Eyes, Irritant
Glycolic acid
Oral LD50 (Rat) = 1,950 mg/kg
Inhalation LC50 (Rat, 4 h) = 14 mg/l
Inhalation LC50 (Rat, 4 h) = 7.7 mg/l
Inhalation LC50 (Rat, 4 h) = > 5.2 mg/l
Inhalation LC50 (Rat, 4 h) = 3.6 mg/l
Corrosive, Irritant, Kidney, Metabolic, Respiratory 
Hazardous Component(s) NTP Carcinogen IARC Carcinogen              
OSHA Carcinogen

(Specifically Regulated )           

2-Butoxyethanol No No No
Alcohols, C16-18 and C18-unsatd., ethoxylated  No No No
Acetic acid, hydroxy-, compds. with
acetophenone-formaldehyde-
(1R,4aS,10aR)-1,2,3,4,4a,9,10,10aoctahydro-1,4a-dimethyl-7-(1-methyle
No No No
2-Propyn-1-ol, compd. with 2- methyloxirane                         No             No No
Acetophenone No No No
Glycolic acid No No No

Ecological information Not available.

Recommended method of disposal  Dispose of according to Federal, State and local governmental regulations. 

The transport information provided in this section only applies to the material/formulation itself, and is not specific to any packaging.

Canada Transportation of Dangerous Goods - Ground

Proper shipping name Not regulated
Hazard class or division None  
Identification number   None  
Packing group None

International Air Transportation (ICAO/IATA) 

Proper shipping name Not regulated
Hazard class or division None  
Identification number   None  
Packing group None

Water Transportation (IMO/IMDG)

Proper shipping name Not regulated
Hazard class or division None  
Identification number   None  
Packing group None

Canada Regulatory Information

CEPA DSL/NDSL Status One or more components are not listed on, and are not exempt from listing on either the Domestic Substances List or the Non-Domestic Substances List.

United States Regulatory Information

TSCA 8 (b) Inventory Status All components are listed as active or are exempt from listing on the Toxic Substances Control Act (TSCA) inventory.

Other Information

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  weassume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International  has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@mumbaichemical.com