RXSOL ANTIFREEZE Corrosion Inhibitor
Introduction
Antifreeze compound for cooling water systems , It is a Very effective blend of GLYCOL classified chemicals along with CORROSION inhibitor to protects all engineering precious metal including aluminium . Its chemically treated layer protect radiators and engines, against rust and corrosion. Its proper dose in cooling system gives full protection from corrosion.
It is biodegradable and does not present an environmental problem.
Solution Strength :
25 Ltrs RXSOL-16-4020-020 : 75 Ltrs Water gives freezing protection up to -140C "or" 25% solution (1 part anti-freeze to 3 parts water)
For extra cold / winter climate , increase to a 33% solution (1 part anti-freeze to 2 parts water) to give freezing protection down to -170C.
EYES : Irrigate copiously with clean, fresh water for at least 15 minutes. Seek medical advice.
SKIN : Wash immediately with plenty of water. Remove contaminated clothing. If irritation persists seek medical attention. Wash contaminated clothing before using them.
INHALATION : Remove to fresh air. If breathing is irregular seek medical advice.
INGESTION : Obtain immediate medical attention. Induce vomiting only if indicated by the doctor. Never give anything by mouth to an unconscious person.
SMART TECHNOLOGY COOLANT
Specialized coolant formulation containing organic compounds and superior corrosion protection. It is particularly effective in preventing cavitation and pitting in high-speed coolant pumps with aluminum housings and impellers. This advanced blend enhances system reliability and extends equipment life. Ideal for industrial engines, DG sets, and other high-performance cooling systems. Designed for long-term metal protection and thermal efficiency.
- Contains Multi-Metal corrosion inhibitors – guards against cavitation corrosion
- Extends pump life – especially in aluminum housing systems
- Organic-based formula – efficient and long-lasting protection
- Ideal for high-speed coolant pumps – marine, industrial, or DG sets
- Enhances thermal efficiency – stable under extreme conditions
- Helps maintain system reliability – reduces downtime and damage
Antifreeze
APPLICATIONS
Antifreeze Special is free from amine, phosphate and nitrite etc. And uses as engine Antifreeze as well as coolant. This product is based on ethylene glycol. It contains a corrosion inhibitor, salts of organic acids and silicates (Si-OAT). It protects all metallic parts against corrosion and deposits in the cooling system.
Benefit
The product protects all parts of cooling system from frost, oxidation and overheating.
It has long-term protection against corrosion for all materials used in the engine and radiator construction, such as cast iron, aluminium, copper and solder alloys as well as a good compatibility with hoses, seals or plastics.
It contains carefully selected amine, nitrite, boron and phosphate free inhibitors and is therefore environmentally friendly.
| Product Name | : | RXSOL-16-4020-020 |
| Product Type | : | ANTIFREEZING LIQUID |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point ::: Mumbai, Kandla, Kolkata, Visakhapatnam, Chennai, Fujairah, Muscat, Nairobi
| Phone | : | +91 22 27815540 / 41 / 42 |
| Fax | : | +91 22 2781 1318 :::AOH :0091 9821214367 |
| : | mail@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Blend of Glycol, Ethanediol & Corrosion Inhibitor |
50-60 |
107-21-1 |
203-473-3 |
R-22 |
603-027-00-1 |
| Di-Sodium Sebacate | 4-5 | 17265-14-4 | 241-300-3 | --- | --- |
| Benzotriazole | 0.25 - 0.30 | 95-14-7 | 202-394-1 | R-43 | --- |
*See Section 16
3.1 Substance/Preparation Classification: This preparation is dangerous under 67/548/EEC and 1999/45/EC regulations and subsequent amendments. This preparate requires a safety data sheet according to the 91/155/EC regulation and subsequent amendments. Further information on health and/or environmental hazards can be found in sections 11 and 12 of this sheet.Danger Symbols: Xn Phrases R: 22 3.2 Danger Identification HARMFUL IF SWALLOWED
|
Contact with skin |
Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes.Seek medical advice |
|
Ingestion |
Never give anything by mouth to an unconscious person. Give plenty of water to drink. Seek medical advice if necessary |
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract. Remove patient to fresh air |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) |
- Carbon oxides may be formed
- Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
|
Personal Precautions |
Wear protective clothing as per section 8. |
|
Environmental Precautions |
No special precautions are required for this product. |
|
Immediate Actions |
Shut off source of leak if safe to do so. |
|
Clean Up Actions |
Absorb spillage in suitable inert material.Flush spill area with copious amounts of water. |
|
Special Precautions |
Wear protective clothing as per section 8. |
|
Handling |
The usual precautions for handling chemicals should be observed. Eyewash bottles should be available |
|
Storage |
Keep only in the original container in a cool, well ventilated place (S3/9/49). Protect from frost |
|
Exposure Limits |
There are no recommended or established controls for this product |
|
Exposure controls |
No special ventilation is required unless the product is used in a spray form |
|
Occupational exposure controls |
No respiratory protection is required unless subject to contact with substance mist. Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended |
|
Odour |
Characteristic |
|
Appearance |
Liquid, soluble in water |
|
pH |
7.5 at 100 % concentration |
|
Boiling point |
150 |
|
Vapour density |
N.A |
|
Melting point |
36iC |
|
Completely soluble in water |
|
|
Specific gravity (water=1) |
1.15 |
|
Non combustible |
|
The product is stable in normal conditions of use and storage. Due to thermal decomposition or in the event of a fire vapours may be produced potentially dangerous to health.Ethylene glycol may absorb moisture from the atmosphere up to twice its own weight.
|
Acute effects |
ingestion of this product is harmful. Even small amounts of product may cause serious health problems (stomach pain, nausea, sickness, diarrhoea, etc.). This product may slightly irritate mucosas, the upper. respiratory tract, eyes, and skin. Exposure symptoms may include: sting, cough, asthma, laryngitis, respiratory. disorders, headache, nausea and sickness |
|
Ethylene glycol |
following ingestion it initially stimulates the CNS; later on depression results. Renal damage with anuria and uremia may occur. Symptoms of over exposure are: vomiting, somnolence, difficulty in breathing,convulsions. The lethal dose in man is approximately 1.4 l/kg. The route of entry is inhalation and ingestion. |
Use this product according to good working practices. Avoid litter. Inform the competent authorities, should the product reach waterways or sewers or contaminate soil or vegetation. Ethylene glycol is biodegradable
Consider the possibility of burning the product in a suitable inceneritor. Acid or basic products must always be neutralized before undergoing any treatment, including biological treatment whenever feasible. If the waste is solid,it can be disposed of in a landfill.
This substance is not dangerous under current provisions of the Code of International Carriage of Dangerous Goods by Road (ADR) and by Rail (RID), of the International Maritime Dangerous Goods Code (IMDG), and of the International Air Transport Association (IATA) regulations.
R-22 HARMFUL IF SWALLOWED Danger labelling under regulations 67/548/CEE and 1999/45/CE and following amendments and adjustments.Workers exposed to this chemical agent must undergo health checks according to regulation 98/24/CE.
|
R22 HARMFUL IF SWALLOWED. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |