Corrosion Inhibitor Multifunctional Closed Chilled Systems

Premium Quality Alkaline Corrosion Inhibitor blend for Metal protection inside the CLOSED circulating system

RXSOL-40-4011-025 is a liquid, Nitrite/Borate based compound with unique formulation with organic Corrosion Inhibitors, Anti-Scalant for use in closed cooling water systems, for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is also acts as a corrosion inhibitor Protects all the metals including cast iron, mild steel, copper etc.

RXSOL Corrosion Inhibitor Multi Metal is a high-performance, molybdate-based multi-metal corrosion inhibitor formulated specifically for closed cooling water systems operating under high temperature and high heat flux conditions. The product is a synergistic blend of molybdate, nitrite, azole, scale inhibitors, and dispersants, designed to provide rapid passivation and long-term corrosion protection for mild steel, copper, and copper alloy metallurgies commonly found in closed-loop systems. It also controls scale formation and particulate fouling, ensuring clean heat transfer surfaces and improved system efficiency.

Application

Application-DG Sets:-Internal combustion engines closed circuit cooling system compressor cooling system.RXSOL-40-4011-256 incorporates superior corrosion inhibitors to prevent corrosion works by free of scale deposits.

Corrosion Inhibition for mixed-metallurgy closed cooling systems, including:

 

  • HVAC chilled and hot water systems
  • Industrial closed cooling loops
  • Engine jacket water systems
  • Heat exchangers and cooling circuits
  • Power plant auxiliary cooling systems
Dose

Method Of Use:-1. Properly clean the system with water and alkaline liquid , if necessary.
2. Add 0 .05-0.2 % of RXSOL-40-4011-256 in system or recommended Nitrite level 1400 – 2500 ppm can be measured and controlled by any standard RXSOL test kit for Nitrite, Chloride test also helps to detect excess contamination to maintain accepted levels . when the product is dosed as recommended limit By buffering action of RXSOL-40-4011-256, pH should be maintained between 8.3 and 10 by the treatment.

Note:- Initial dosage for an untreated system is 7 Kg of RXSOL-40-4011-256/ 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL-40-4011-256 every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval .

These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. • Department issuing data specification sheet Environment protection department.

Note

Advantages: -

  • 1. Prolong the life of equipment by keeping scale and corrosion free. Since RXSOL-40-4011-025 is alkaline and so will suppress acid corrosion, which would otherwise result in corrosion damage such as pitting. However, the alkalinity control is such that even if the product is accidentally overdosed, the pH of the water will remain within limits. The metals which would be affected by extremes of alkalinity or acidity are protected.
  • 2. Improves generating cooling efficiency by maintaining a clean heat transfer
  • 3. Corrosion protection by using superior corrosion inhibitor.
  • 4. Reduced maintenance and down time
  • 5. Compatible with Coolants / Antifreeze solution / Glycol .
  • 6. Friendly with Metals (Like steel, Copper, Aluminum, all alloys) & Non-metal (Rubber, Hoses, Gasket etc.)
Remarks / Precaution

A proprietory-blend corrosion inhibitor designed for closed-loop chilled water systems. It provides dual-action protection by forming a stable passive film on steel, copper and mixed-metal surfaces, while molybdate enhances long-term corrosion resistance under varying operating conditions. The formulation controls oxygen corrosion, minimizes pitting and under-deposit attack, and maintains system efficiency. Ideal for chilled systems, it ensures extended equipment life and reliable performance. Suitable for commercial use.

MSDS

Product Name RXSOL-40-4011-025
Product Type Corrosion Inhibitor Multifunctional closed chilled systems 

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhpatnam, Fujairah, Muscat, Nairobi

Phone +91 22 65113333 / 5555 / 9999 / 27611360
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

Name of Substance

CAS

Weight %

SODIUM MOLYBDATE

7631-95-0

10-20

TOLUTRIAZOLE 29385-43-1 0.5-01
SODIUM NITRITE 7632-00-0 5-10
SODIUM BORATE 1303-96-4 0.1-0.5
Silicate as a Aluminium Corrosion Inhibitor 1344-09-8 09-10
Azole as a Copper Corrosion Inhibitor 109-97-7 01-02
Properitory Blend of Polymer as a Dispersency Stabilization --- 10-20

Odour Odourless
Appearance Pale Yellowis to Clear Liquid, soluble in water
Contact with eyes May cause pain
Contact with skin In cases of severe exposure, severe irritation may develop
Inhalation Vapours or aerosols may cause irritation of eyes, nose and respiratory tract
Ingestion Toxic if swallowed (R25)
 

Contact with skin Remove contaminated clothing immediately and drench affected skin with plenty of water Contaminated clothing should be laundered before reuse, When in doubt or symptoms persist, seek medical attention
Contact with eyes If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes
Irrigate eyes thoroughly whilst lifting eyelids, Obtain immediate medical attention
Ingestion Never make an unconscious person vomit or drink fluids
Give water or milk to drink
Induce vomiting (only if patient is conscious), Obtain immediate medical attention
Inhalation Inhalation is unlikely to occur
Remove patient to fresh air
When in doubt or symptoms persist, seek medical attention
General In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)

Fire and Explosion Hazards

WATER BASED PRODUCT WITH NO SPECIAL HAZARDS

Precautions: None
Extinguishing media:  NO SPECIAL MEDIA REQUIRED
Not suitable extinguishing media: NONE

 

Personal Precautions Wear protective clothing as per section 8
Environmental Precautions Do not allow to enter public sewers and watercourses
Immediate Actions Use appropriate containment to avoid environmental contamination (S57)
Clean Up Actions Absorb spillage in inert material and shovel up
Ventilate the area and wash spill site after material pick-up is complete
Special Precautions Wear protective clothing as per section 8

Handling

WEAR GLOVES, EYE PROTECTION AND OVERALLS.

Storage

STORES INDOORS AND PREVENT FROM FREEZING.


Exposure controls No special precautions are required for this product
Occupational exposure controls Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended)

gloves                     goggles                  suit                   

Gloves                          Goggles                        suit                    No_Smoking


Appearance

BROWN COLOURED HAZY LIQUID

Boiling point

100 C

C Density [kg/m3]

1.17 - 1.24

Flashpoint TCC

NONE Vapour pressure [mm Hg]

Pour point 

NONE Vapour density [a ir=1]:

Auto-ignition temp  NONE Soluble in organic solvent: NONE
Expl.omr. [vol%] Solubility in water [w-%]: 100%
pH concentrate: 11.5 - 12.0 pH 
Rel. evaporation Rate. N/A
Ether = 1 Butylacetate = 10 0
Freezing Point >-20 Degree C

 

Stability

THE PRODUCT IS STABLE AND HAS A SHELF-LIFE OF 2 YEARS

Avoid blending with

ACIDS

Dangerous products of degradation NONE
Dangerous products of combustion NONE

Analysis data

LD [RAT] >50 00 mg/kg [CALCULATED] 50 CONSIDERED TO BE NON-TOXI

 
Toxicological information No experimental data available
Inhalation Not applicable
Contact with skin In cases of severe exposure, severe irritation may develop
Contact with eyes May cause severe irritation
May cause pain
Ingestion Toxic if swallowed (R25)
Carcinogenicity No evidence of carcinogenic effects


Analysis data:

LD RAINBOW TROUT > 500 mg/l [CALCULATED] 50 CONSIDERED TO BE OF NO DANGER TO THE ENVIRONMENT

 
Ecotoxicity This product contains components which are classified in the EU as dangerous for the environment.
May cause acute effects in the aquatic environment
Mobility Completely soluble in water
Persistence and Biodegradability Its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable.
Bioaccumulation Potential Bioaccumulation of the components in this product is insignificant.
Other Adverse Effects No environmental problems are expected when the product is used / handled correctly. In its intended use, the product will not be released into the environment.
 

 

Recommendations:

ALKALINE PRODUCT WHICH IN USE IS DILUTED DOWN CONSIDERABLY AND ALLOWED TO ENTER THE ENVIRONMENT.

 
Classification EU Waste class: 06.03 This material and/or its container must be disposed of as hazardous waste
Disposal considerations Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation

UN no

 

Packaging gr

 

ADR/RID  
IMDG class: Side  
EmS no  
MFAG no  
DGR:  
Goods description  
Others  

Chemical health hazard:

HARMFUL/IRRITANT

Chemical to the environment

.

Infla mmable product  
Explosive product  
Labelling category [-s]: HARMFUL/IRRITANT
 Symbol [-er]:  Xn, Xi
R-phrase [-s]: R21-Harmful in contact with skin, R36-Irritating to eyes, R38-Irritating to skin
 S-phrase [-s]: S61-Avoid release to the environment, S45-In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

 

NO CARCINOGENIC PROPERTIES HAS BEEN FOUND WITH ANY INGREDIENTS.

NO EVIDENCE OF MUTAGENIC EFFECTS

EXPOSURE LIMITS NOT ASSIGNED

Legal Disclaimre:-

The above information is based on the present state of our knowledge of the product at the time of publication. It is given in good faith, No warranty is implied with respect to the quality or the specif ication of the product. The user must satisfy himself that the product is entirely suitable for his purpose.

Text of R and S phrase codes used  in  this safety data sheet:-  R25: Toxic I f swallowed;  R43: May  cause  sensitisationby  skin  contact;   R50:  Very  toxic  to  aquatic   organisms;   R50/53:  Very   toxic   to  a  quatic  organisms,  may  cause long-term  adverse  effects  in  the  aquatic   environment;  R62: Possible  risk  of I mpaired fertility; R63: Possible risk of harm  to the unborn child;  R8: Contact  with combustible  material  may cause fire.The  information  provided  about  the product  on  this  Safety  Data  Sheet  has  been  compiled  from knowledge of the individual constituents.The data given here  is  based  on current knowledge and experience. This Safety Data Sheet describes the product.In terms of safetyr equirements   and   does   not   signify  any   warranty   with  regard  to  the  product's  properties  The  data  given  here  only  applies  when  product  used for proper application(s). The product  is  not  sold  as  suitable for  other applications  -   usage   in  such  may  cause  risks  not   mentioned   in   this  sheet.  Do  not  use  for  other application (s) without seeking advice from manufacturer

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

 

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@mumbaichemical.com