RXSOL Corrosion Inhibitor Silicate Based is a high-performance, low-toxicity, silicate-based cooling water corrosion inhibitor formulated to protect open recirculating cooling water systems against corrosion.
RXSOL Corrosion Inhibitor Silicate Based is particularly suitable for cooling systems operating with naturally soft or artificially softened water, providing effective corrosion protection under appropriate water treatment conditions.
This advanced cooling water treatment formulation is designed to control corrosion of ferrous and non-ferrous metals, including steel, copper, and brass, helping to maintain system integrity and improve operational reliability.
The formulation combines silicate-based corrosion inhibition with complementary treatment components, which may include phosphonates, phosphate, polymers, and azole-based inhibitors, together with dispersing agents to support deposit control. It is designed to remain compatible with normal chlorine and bromine treatment levels when used within the recommended operating limits.
RXSOL Corrosion Inhibitor Silicate Based is primarily intended for soft-water cooling systems. Suitability for specific water chemistry and treatment conditions should be confirmed through compatibility testing and an appropriate cooling water treatment programme.
Dosage and Application of Silicate Based Corrosion Inhibitor for Chiller Systems
RXSOL Corrosion Inhibitor Silicate Based is designed for use in soft-water cooling systems only.
For a new system start-up or the recommissioning of an existing system, apply an initial dose of 300 ppm to establish the required treatment concentration.
For routine operation, maintain a product concentration of 100-150 ppm in the circulating cooling water.
Always operate within the cooling tower manufacturer's recommended water chemistry and control limits.
RXSOL Corrosion Inhibitor Silicate Based is compatible with most conventional cooling water treatment products. However, compatibility should be confirmed before mixing with other chemicals or introducing the product into an existing treatment programme.
| Parameter | Value |
|---|---|
| Form: | Solution |
| Colour: | Clear |
| Odour: | Slight |
| pH: | 12 |
| Specific gravity: | 1.12-1.25 |
| Solubility in water | Completely miscible |
| Decomposition temp: | Decomposes on heating |
| Boiling point: | >100 oC |
Silicate based corrosion inhibitor for water treatment.
Key Features of RXSOL Corrosion Inhibitor Silicate Based
- High performance cooling water treatment
- Suitable for open re-circulating cooling systems
- Contains PTSA Tracer
- Ideal for systems containing natural or artificial soft water
- Proven high performer against corrosion of steel, copper and brass
- Contains an effective dispersant Stable to chlorine and bromine
- Low toxicity
| Product Name | Corrosion Inhibitor Silicate Based |
| Part Number | RXSOL-44-1047-027 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| mail@rxmarine.com | |
| Website | www.rxmraine.com |
Proprietory blend of silicates and film forming corrosion inhibitor for multi metal systems.
GHS Classification
| Skin irritation |
Category 2
|
| Eye irritation | Category 2A |
| Skin sensitization | Category 1 |
|
Specific target organ toxicity
- single exposure (Oral)
|
Category 1 (Blood) |
GHS Label element
| Signal Word | Danger |
| Hazard Statements |
Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
Causes damage to organs (Blood) if swallowed.
|
| Precautionary Statements |
Prevention:
Do not breathe dust/fume/gas/mist/vapours/spray. Wash skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/ eye protection/ face protection.
Response:
IF ON SKIN: Wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed: Call a POISON CENTER or doctor/ physician.
If skin irritation or rash occurs: Get medical advice/ attention. If eye irritation persists: Get medical advice/ attention. Take off contaminated clothing and wash before reuse.
|
| Other hazards | None known. |
| In case of eye contact | Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention. |
| In case of skin contact | Wash off immediately with plenty of water for at least 15 minutes. Use a mild soap if available. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention. |
| If swallowed | Rinse mouth. Get medical attention if symptoms occur. |
| If inhaled | Get medical attention if symptoms occur. |
| Protection of first-aiders | In event of emergency assess the danger before taking action. Do not put yourself at risk of injury. If in doubt, contact emergency responders. Use personal protective equipment as required. |
| Notes to physician | Treat symptomatically. |
| Most important symptoms and effects, both acute and delayed | See Section 11 for more detailed information on health effects and symptoms. |
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Unsuitable extinguishing media | None known. |
| Specific hazards during firefighting |
Not flammable or combustible.
|
| Hazardous combustion products | Decomposition products may include the following materials: Carbon oxides nitrogen oxides (NOx) |
| Special protective equipment for firefighters | Use personal protective equipment. |
| Specific extinguishing methods | Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. In the event of fire and/or explosion do not breathe fumes. |
| Personal precautions, protective equipment and emergency procedures |
Ensure clean-up is conducted by trained personnel only. Refer to protective measures listed in sections 7 and 8.
|
| Environmental precautions | Do not allow contact with soil, surface or ground water. |
| Methods and material for containment and cleaning up | Stop leak if safe to do so. Contain spillage, and then collect with noncombustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). For large spills, dike spilled material or otherwise contain material to ensure runoff does not reach a waterway. Flush away traces with water. |
| Advice on safe handling | Avoid contact with skin and eyes. Do not get in eyes, on skin, or on clothing. Wash hands thoroughly after handling. Use only with adequate ventilation. |
| Conditions for safe storage | Keep out of reach of children. Keep container tightly closed. Store in suitable labelled containers. |
| Suitable material |
Keep in properly labelled containers.
|
| Unsuitable material |
The following compatibility data is suggested based on similar product data and/or industry experience: Shipping and long term storage compatibility with construction materials can vary; we therefore recommend that compatibility is tested prior to use.
|
Personal protective equipment
| Eye protection | Safety glasses with side-shields |
| Hand protection |
Wear protective gloves.
Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.
|
| Skin protection |
Wear suitable protective clothing.
|
| Respiratory protection | When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. |
| Hygiene measures | Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash face, hands and any exposed skin thoroughly after handling. |
| Physical state | Liquid |
| Color | Clear Colorless |
| Odor | Odourless |
| Flash point | Method: Pensky-Martens closed cup, does not flash |
| pH | 11.1 - 11.8,(100 %), Method: ASTM E 70 |
| Odour Threshold | No data available |
| Melting point/freezing point | Freezing Point: -29 °C |
| Initial boiling point and boiling range | 100 °C |
| Evaporation rate | No data available |
| Flammability (solid, gas) | No data available |
| Upper explosion limit | No data available |
| Lower explosion limit |
No data available
|
| Vapour pressure | Similar to water |
| Relative vapour density | No data available |
| Density | 1.15-1.25 |
| Water solubility | Completely soluble |
| Solubility in other solvents | No data available |
| Partition coefficient: noctanol/water | No data available |
| Auto-ignition temperature | No data available |
| Thermal decomposition | No data available |
| Viscosity, dynamic | No data available |
| Viscosity, kinematic | No data available |
| Molecular weight | No data available |
| VOC | 0 %, 0 g/l, EPA Method 24 |
| Chemical stability | Stable under normal conditions |
| Possibility of hazardous reactions | No dangerous reaction known under conditions of normal use. |
| Conditions to avoid | None known. |
| Incompatible materials | Contact with reducing agents (e.g. hydrazine, sulfites, sulfide, aluminum or magnesium dust) may generate heat, fires, explosions and toxic vapors. Do not mix with amines. Sodium nitrite can react with certain amines to produce N-nitrosamines, many of which are cancer-causing agents to laboratory animals. Contact with strong acids (e.g. sulfuric, phosphoric, nitric, hydrochloric, chromic, sulfonic) may generate heat, splattering or boiling and toxic vapors. |
| Hazardous decomposition products |
Decomposition products may include the following materials:
Carbon oxides
nitrogen oxides (NOx)
|
| Information on likely routes of exposure |
Inhalation, Eye contact, Skin contact
|
| Eyes | Causes serious eye irritation. |
| Skin | Causes skin irritation. May cause allergic skin reaction. |
| Ingestion | Health injuries are not known or expected under normal use. |
| Inhalation | Health injuries are not known or expected under normal use |
| Chronic Exposure | May cause damage to organs. |
| Eye contact | Redness, Pain, Irritation |
| Skin contact | Redness, Irritation, Allergic reactions |
| Ingestion | No symptoms known or expected. |
| Inhalation | No symptoms known or expected. |
| Acute oral toxicity |
LD50 rat: > 2,000 mg/kg
Test substance: Product
|
| Acute inhalation toxicity | No data available |
| Acute dermal toxicity | Acute toxicity estimate: > 5,000 mg/kg |
| Skin corrosion/irritation | No data available |
| Serious eye damage/eye irritation | No data available |
| Respiratory or skin sensitization | No data available |
| Carcinogenicity | No data available |
| Reproductive effects | No data available |
| Germ cell mutagenicity | No data available |
| Teratogenicity | No data available |
| STOT - single exposure | No data available |
| STOT - repeated exposure | No data available |
| Aspiration toxicity | No data available |
Ecotoxicity
| Environmental Effects | Harmful to aquatic life. |
| Product | |
| Toxicity to fish |
LC50 Turbot: > 2,000 mg/l
Exposure time: 96 hrs
Test substance: Product
LC50 Oncorhynchus mykiss (rainbow trout): 57 mg/l
Exposure time: 96 hrs
Test substance: Product
NOEC Turbot: 2,000 mg/l
Exposure time: 96 hrs
Test substance: Product
NOEC Oncorhynchus mykiss (rainbow trout): 40 mg/l
Exposure time: 96 hrs
Test substance: Product
|
| Toxicity to daphnia and other aquatic invertebrates |
LC50 Daphnia magna (Water flea): 670 mg/l
Exposure time: 48 hrs
Test substance: Product
NOEC Daphnia magna (Water flea): 400 mg/l
Exposure time: 48 hrs
Test substance: Product
|
| Persistence and degradability |
The organic portion of this preparation is expected to be readily biodegradable.
Total Organic Carbon (TOC) : 37,000 mg/l
Chemical Oxygen Demand (COD): 23,300 mg/l
|
| Mobility |
The environmental fate was estimated using a level III fugacity model embedded in the EPI (estimation program interface) Suite TM, provided by the US EPA. The model assumes a steady state condition between the total input and output. The level III model does not require equilibrium between the defined media. The information provided is intended to give the user a general estimate of the environmental fate of this product under the defined conditions of the models.
If released into the environment this material is expected to distribute to the air, water and soil/sediment in the approximate respective percentages;
Air : 5%
Water : 30 - 50%
Soil : 50 - 70%
The portion in water is expected to be soluble or dispersible.
|
| Bioaccumulative potential | This preparation or material is not expected to bioaccumulate. |
| Other information | No data available |
If this product becomes a waste, it is not a hazardous waste as defined by the Resource Conservation and Recovery Act (RCRA) 40 CFR 261, since it does not have the characteristics of Subpart C, nor is it listed under Subpart D.
| Disposal methods | The product should not be allowed to enter drains, water courses or the soil. Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with local regulations. Dispose of wastes in an approved waste disposal facility. |
| Disposal considerations | Dispose of as unused product. Empty containers should be taken to an approved waste handling site for recycling or disposal. Do not re-use empty containers. |
| Proper shipping name | PRODUCT IS NOT REGULATED DURING TRANSPORTATION |
Not classified as dangerous.
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. |