General Purpose Cleaner provides maximum regulatory compliance without performance compromises. It is best for applications that will not allow butyl, but demand performance and versatility. Formulated with a special polymer that keeps dirt and greasy soils from returning to surfaces. General Purpose Cleaner even approaches the cleaning performance of many aqueous cleaners containing butyl.
Similar family product : rxmarine.com/non-butyl-degreaser-conc-0
It is strong enough to attack and remove tough dirt, dust and grime deposits. Yet its moderate pH formula, biodegradability and zero VOC content make it versatile and safe enough to use daily for all your cleaning tasks. General Purpose Cleaner is non-corrosive (pH < 11.0), biodegradable, concentrated, nonabrasive, safe on most plastics, non-flammable, industrial strength, non-ozone depleting, floor wax safe (when diluted). Contains no phosphates, ammonia or bleach, and is NSF registered category code A1 for use in federally inspected meat & poultry plants.
Specifications
NSF Registration# 138267, Category Code A1, for use in meat and poultry plants.
CONCENTRATED CLEANING FORMULA
Concentrated Solution is a biodegradable, caustic-free alkaline cleaner formulated for heavy duty industrial use. It removes oils and a variety of soils from surface. Compatible with aluminum and aluminum alloys as well as copper, brass, and steel substrates. It is particularly effective for removing fabricating oils, cutting oils, and polishing oils.
Directions
Use full strength or dilute with water.
Before applying, pre-test on a hidden section of surface to be cleaned for color fastness and surface integrity.
Soak, pre-wash, sponge or apply directly to pre-tested surface.
Allow General Purpose Cleaner to penetrate the soil.
Wipe or rinse clean with water or a damp sponge.
FOR HEAVY DUTY DEGREASING WHERE BUTYL IS ALLOWED: CRC recommends the use of Industrial Strength Cleaner/Degreaser or All Purpose Cleaner/Degreaser.
RXSOL-10-1701 Solution is mixed easily with cold or hot water in a concentration of 7-10% by volume. RXSOL-10-1701 Solution can be used over a temperature range from 130°F to 180°F (82°C) in suitable commercial and industrial cleaning tanks.
For optimum cleaning, RXSOL-10-1701 should be operated at recommended temperatures. Cleaning time is directly depends by the quantity and nature of the soil. Operating RXSOL-10-1701 below the recommended concentrations, temperatures, or time will generally result in poor cleaner performance, characterized by cloudiness and water breaks. Operating RXSOL-10-1701 above the recommended parameters may be lead to component metal attack or cause the surfactants to separate from the solution causing poor cleaning. It is imperative that the solution be allowed to "degas" at operating temperature for a minimum of 10 minutes prior to placing the parts into the cleaning solution. It is best if ultrasonic energy is applied during this time to enhance degassing. Thorough rinsing is suggested for removal of cleaning solution. As with any process involving water, drying should be considered as the final step. The selection and use of the proper ultrasonic cleaning equipment and component fixturing will influence the cleaning efficiency and performance of RXSOL-10-1701
A concentrated general purpose cleaner for use on all surfaces not harmd by water. Cleans floors, procelain, leather, pastic,stainless steel, aluminium surface, and appliances. Dilute before using.
|
Product Name |
General Purpose Cleaner |
|
Product Type |
RXSOL-10-1701-020 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540 |
| Fax | +91 22 2781 1318 :::AOH :0091 9322594669 |
| mail@rxmarine.com |
| Ingredient(s) | CAS | Weight% | LD50 Oral - Rat mg/kg) | LD50 Dermal -Rabbit | LC50 Inhalation -Rat |
| Alcohol ethoxylates | 68439-46-3 | 10 - 20% | 1400 | >2 g/kg | Not available |
| Hydrogen peroxide | 7722-84-1 | 1 - 5% | 801 | 2000 mg/kg | 2 mg/L (4 h) |
| EMERGENCY OVERVIEW | |
|
CAUTION. CAUSES EYE IRRITATION. MAY BE MILDLY IRRITATING TO SKIN. |
|
| Principal routes of exposure | : Skin contact. Inhalation. Eye contact. |
| Eye contact | : Moderately irritating to the eyes. |
| Skin contact | : May be mildly irritating to skin. |
| Inhalation | : None known. |
| Ingestion | : May cause irritation to mouth, throat and stomach. |
|
Eye contact |
: |
Flush immediately with plenty of water. If irritation persists, get medical attention. |
|
Skin contact |
: |
Flush immediately with plenty of water. If irritation develops, get medical attention. |
|
Inhalation |
: |
No specific first aid measures are required. |
|
Ingestion |
: |
If swallowed, give a cupful of water or milk. |
|
Aggravated Medical Conditions |
: |
None known. |
|
Suitable extinguishing media |
: |
The product is not flammable. Extinguish fire using agent suitable for surrounding fire. |
|
Specific hazards |
: |
Decomposition releases oxygen, which may intensify fire . |
|
Unusual hazards |
: |
None known. |
|
Specific methods |
: |
No special methods required. |
|
Special protective equipment for firefighters |
:
|
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. |
|
Extinguishing media which must not be used for safety reasons |
: |
No information available. |
|
Personal precautions |
: |
Not relevant for the product itself. |
|
Environmental precautions and clean-up methods |
:
|
Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container. Clean-up methods - large spillage. Use a water rinse for final clean-up. |
|
Handling |
|
Avoid contact with skin, eyes and clothing. Wash thoroughly after handling. FOR COMMERICAL AND INDUSTRIAL USE ONLY. |
|
Storage |
: |
Protect from freezing. Keep tightly closed in a dry, cool and well-ventilated place. KEEP OUT OF REACH OF CHILDREN. |
|
Engineering measures to reduce exposure |
: |
No special ventilation requirements General room ventilation is adequate |
|
Personal Protective Equipment |
|
|
|
Eye protection |
: |
No special requirements under normal use conditions. |
|
Hand protection |
: |
No special requirements under normal use conditions |
|
Skin and body protection |
: |
No special requirements under normal use conditions. |
|
Respiratory protection |
: |
No special requirements under normal use conditions. |
|
Hygiene measures |
: |
Handle in accordance with good industrial hygiene and safety practice |
| Ingredient(s) | CAS # | ACGIH | OSHA | Mexico |
| Hydrogen peroxide | 7722-84-1 | 1 ppm (TWA) |
1 ppm (TWA) 1.4 mg/m3 (TWA) |
2 ppm (STEL) 3 mg/m3 (STEL) 1 ppm (TWA) 1.5 mg/m3 (TWA) |
| Physical State | : Liquid |
| Appearance | : Liquid |
| Specific gravity | : 1.026 |
| Vapor density | : No information available |
| Boiling point/range | : Not determined |
| Decomposition temperature | : Not determined |
| Solubility | : Completely Soluble |
| Solubility in other solvents | : No information available |
| Partition coefficient (n-octanol/water) | : No information available |
| Elemental Phosphorus | : 0 % by wt. |
| pH | : 2.0 |
| Explosion limits | : Upper: Not determined - lower: Not determined |
| Bulk density | : No information available |
| Evaporation Rate | : No information available |
| Color | : Clear Colorless |
| Odor | : No Odor/Odorless |
| Melting point/range | : Not determined |
| Autoignition temperature | : No information available |
| Density | : 8.56 lbs/gal 1.026 Kg/L |
| Flash point | : > 200 °F > 93.4 °C |
| Viscosity | : No information available |
| VOC | : 0 % * |
| Dilution pH | : 6.2 @ 1:64 |
| Stability | : The product is stable |
| Polymerization | : Hazardous polymerization does not occur |
| Hazardous decomposition products | : Oxygen. |
| Materials to avoid | : Bases . Reducing agents. |
| Conditions to avoid | : Do not freeze. Do not mix with any other product or chemical . |
|
Acute toxicity |
: |
Oral LD50 estimated to be greater than 5000 mg/kg. Dermal LD50 estimated to be > 2000 mg/kg. |
|
Component Information |
: |
See Section 3 |
|
Chronic toxicity |
: |
None known |
|
Specific effects |
: |
|
|
Carcinogenic effects |
: |
None known |
|
Mutagenic effects |
: |
None known |
|
Reproductive toxicity |
: |
None known |
|
Target organ effects |
: |
None known |
| Environmental Information | : No data available |
|
Waste from residues / unused products |
:
|
Undiluted product is regulated under environmental and transportation laws as a corrosive waste. Dispose of according to all federal, state and local applicable regulations |
|
RCRA Hazard Class: |
: |
D002 |
|
DOT/TDG/IMDG |
: |
Please refer to the Diversey HazMat Library, http://naextranet.diversey.com/dot/,for up to date shipping information. |
|
DOT Bill of Lading Descriptio |
: |
CLEANING, WASHING, BUFFING, OR POLISHING COMPOUNDS LIQUID |
|
IMDG Bill of Lading Description |
: |
CLEANING, WASHING, BUFFING, OR POLISHING COMPOUNDS LIQUID |
International Inventories at CAS# Level
All components of this product are listed on the following inventories: U.S.A. (TSCA), Canada (DSL/NDSL).
U.S. Regulations
California Proposition 65: This product is not subject to the reporting requirements under California's Proposition 65
| RIGHT TO KNOW (RTK) | |||||
| Ingredient(s) | CAS # | MARTK: | NJRTK: | PARTK: | RIRTK: |
| Sodium xylene sulfonate | 1300-72-7 | ||||
| Alcohol ethoxylates | 68439-463 | ||||
| Hydrogen peroxide | 7722-84-1 | ||||
| Water | 7732-18-5 | ||||
| CERCLA/ SARA | |||||
| Ingredient(s) | CAS # | Weight % | CERCLA/SARA RQ (lbs) | Section 302 TPQ (lbs) | Section 313 |
| Hydrogen peroxide | 7722-84-1 | 1 - 5% | 1000 | ||
| SARA 311/312 Hazard Categories | |
| Immediate | : x |
| Delayed | : - |
| Fire | : - |
| Reactivity | : - |
| Sudden Release of Pressure | : - |
| Canada | : - |
| WHMIS hazard class | : D2B Toxic materials |
Text of R and S phrase codes used in this safety data sheet:- R34: Causes burns; R36: Irritating to eyes; R37:Irritating to respiratory system; R41: Risk of serious damage to eyes. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.