Name: Hold Clean XF
Brand: Mumbai Chemical
Availability: InStock

Holdbrite supplier at all INDIAN - UAE port. One of popular and effective product for SHIP HOLD cleaning.

Holdbrite RX is highly concentrated, comprising special detergents, surfactants, builders and corrosion inhibitors. It is specifically formulated for the effective removal of heavy duty residues and can be also applied by high pressure spraying equipment. Holdbrite RX can be quickly dissolved in water for removing lighter grease, oil, pet coke and dirt deposits. Compatible with most coated surfaces and dries leaving a good shine. Holdbrite RX is water based, non flammable, biodegradable Product.

Application

Holdbrite PLUS can be used for cargo hold and tanks cleaning and refrigeration vessels, as well as soot removal from Inert Gas Systems and general cleaning. It removes lighter grease, oil, petcoke and dirt deposits and also effectively removes greases, waxes, vegetable and animal oils, sludge, soot, carbon deposits, dirt and grime. .It is also suitable for applied on vertical surfaces and due to foaming properties, its increases the residential time, thus cleaning efficiency.

Dose

Information are based on experience and are meant only as a guide since circumstances for each tank cleaning operation vary. They are not intended to interfere with the judgment of the vessel’s responsible personnel.Precleaning tanks with high pressure warm water is highly recommended since large deposits of oil or other residues in the tank must be removed to ensure an effective cleaning operation.

General Cleaning

For general use, dilute Holdbrite RXSOL appropriately, depending on the contamination, and use conventional cleaning methods, such as brushing, scrubbing or hand spraying.

Removal of Soot from Inert Gas Systems (IGS)

Dilute from 5 to 20% of Holdbrite RXSOL in fresh water. Spray the solution onto the surface, using high pressure cleaning equipment. When used with a hand sprayer, apply 1 litre of neat Holdbtire Rx per 12 m2. Allow the product to act and then rinse off with fresh water before drying. Allow solution to penetrate soil for about 30 minutes and then wash off thoroughly with high pressure fresh water, heated up to 80°C. Always wash off before chemicals dry on the surface. Repeat the procedure, if contamination persists.

Cargo hold cleaning

For heavily soiled areas, a preliminary cleaning is required. If surface is heavily contaminated, higher concentrations of the product in water can be used. When used for spot cleaning, apply by hand spraying neat or prepare a 20% solution, and allow solution to penetrate soil for about 30 minutes before rinsing off with water. Always wash off before chemicals dry on the surface.

Heavy Soil deposition Use Undiluted from to 20-50% diluted with water.
Medium soil deposition 10-20% diluted with water.
Light Soil ( general degreasing ) 5-10% diluted with water.

Tank cleaning

Holdbrite RX is ideal for tank cleaning for most types of contamination. Suitable for epoxy, but not for zinc silicate coatings.The dosage rate for direct injection with tank washing machines is 1-20 litres per ton wash water (0.1-2.0%). For recirculation, use a rate of 1-20 litres per ton wash water (0.1-2.0%). For heavily soiled areas, a preliminary cleaning is required.

If Slip Barrier Coat RXSOL Hold Block or RXSOL Barrier Hold Coat is applied to the cargo hold surfaces prior to loading, the concentration of Holdbrite RXSOL in the cleaning solution may be reduced.

Technical specifications

Parameters	Values
Appearance	Clear Liquid
Odour	Soft
Boiling Point	109 °C
Flash Point	None
pH	12–13
Solubility	Soluble in Water

Note

Feature & Benefit

Effective cleaning of heavy duty residues from cargo hold tanks, decks, bulkheads, etc.

Heavy duty, water-based cleaner.

Efficient, multipurpose cleaning.

Highly concentrated: dilute for most cleaning needs.

Comprises special detergents, surfactants, builders and corrosion inhibitors.

Removes soot from Inert Gas Systems (IGS).

Non-flammable.

Suitable to use with hot or cold water high pressure equipment.

Remarks / Precaution

Keep tightly closed coantainer. Avoid direct concentrated product contact with any part of BODY skin. The most important things HOLD BRITE RXSOL doesn't release any gases or smell, this uniquness of product kept in safe category.

MSDS

Product Name	:	Holdbrite RXSOL
Part Number	:	RXSOL-22-2220-025

Specialized product for cargo hold cleaning.
Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kolkata, Chennai, Vizag, Gandhidham, Fujairah, Muscat, Nairobi, Canada

Phone	:	+91 22 65113333 / 5555 / 9999 / 27611360
Fax	:	+91 22 2781 1318 :::AOH :0091 9821214367
Email	:	mail@rxmarine.com

Chemical Name	Concentration	CAS Number	EC Number	R Phrases*	Symbols
Potassium Hydroxide	10-5%	1310-58-3	215-181-3	35	C
2-Butoxy Ethanol	1-5%	111-76-2	203-905-0	X
Fatty alcohol ethoxylate	5-10%	34398-01-1	500-084-3	41
Disodium Metasilicate	1- 5%	6834-92-0	229-912-9		C
Quaternary Alkyl Amine ethoxylate Chloride	1 - 5%	863679-20-3	NA	41
Non classified ingredients	60-70

Odour	Odourless
Appearance	Liquid, colourless , soluble in water
Contact with eyes	Corrosive to eyes, Can cause damage to the eyes
Contact with skin	Causes severe burns (R35)
Inhalation	No information available but must be considered harmful
Ingestion	Harmful if swallowed (R22)

Contact with skin	Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water.Seek medical advice if necessary
Contact with eyes	If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes.Irrigate eyes thoroughly whilst lifting eyelids.Obtain immediate medical attention. Continue flushing with water until medical help arrives.
Ingestion	Do not induce vomiting.Never give anything by mouth to an unconscious person.Give water or milk to drink.Obtain immediate medical attention.
Inhalation	Seek medical attention if ill effects occur
General	In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) When in doubt or symptoms persist, seek medical attention

Non combustible. Smoke from fires is corrosive. Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions.
Vapour density - not applicable.

Personal Precautions	Wear protective clothing as per section 8
Environmental Precautions	Do not allow to enter public sewers and watercourses
Clean Up Actions	Absorb spillage in inert material and shovel up.Ventilate the area and wash spill site after material pick-up is complete Neutralise with Acid
Special Precautions	Wear protective clothing as per section 8

Handling	Eyewash bottles should be available.See Section 8.
Storage	Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from frost.

Exposure Limits	OES / LTEL # ppm 2 mg/m3 (Sodium hydroxide).
Exposure controls	No special ventilation is required unless the product is used in a spray form.
Occupational exposure controls	Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) During fumigation/spraying wear suitable respiratory equipment (S42).

gloves suit. goggles no_smoking

Gloves Suit. Goggles No_Smoking

Odour	Odourless
Appearance	Liquid, colourless to yellow, soluble in water
pH	11.5 - 12.5 at 0.1 % concentration, pH 13 - 14 at 100 % concentration
Boiling point	>100 °C at 760 mm /Hg
Vapour pressure	not known
Vapour density	not applicable
Freezing point	5 °C at 760 mm/Hg
Completely soluble in water
Specific gravity (water=1)	1.045 - 1.055
Non combustible

- This article is considered stable under normal conditions
- Avoid overheating, Keep away from frost
- Incompatible with acid
- See Section 5

Toxicological information	No experimental data available.
Inhalation	Can cause damage to the respiratory system.
Contact with skin	Causes burns (R35).
Contact with eyes	Causes burns (R35).
Ingestion	The ingestion of significant quantities may cause burning sensation.The ingestion of significant quantities may cause damage to digestive system.
Carcinogenicity	No evidence of carcinogenic effects.

Ecotoxicity	"In general, this cleaning agent main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable." and Pollution Hazards approved this product for use as tank / hold cleaning agent by chemical tankers.
Mobility	Completely soluble in water
Persistence and Biodegradability	Its main ingredients will either dissolve rapidly and dissociate in water or are readily / inherently biodegradable.
Bioaccumulation Potential	Bioaccumulation of the components in this product is insignificant.
Other Adverse Effects	No environmental problems are expected when the product is used / handled correctly.

Classification	Pollution Hazards approved this product for use as tank / hold cleaning agent by chemical tankers.
Disposal considerations	"In general, this cleaning agent compatible to the environment, its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable."

Proper Shipping Name		Potassium hydroxide, solution
UN
	Proper Shipping Name	Potassium hydroxide, solution
	UN NO	1824
	Hazard Class	8	Packing Group	II
Road/Rail (ADR/RID)
	Proper Shipping Name	Potassium hydroxide, solution
	ADR UN No	1824
	ADR Hazard Class	8	Termcard	80S1824
Sear (IMDG)
	Proper Shipping Name	Potassium hydroxide, solution
	IMDG UN No	1824
	IMDG Hazard Class	8	IMDG Pack Group	II
	IMDG EmS	F-A, S-B	IMDG subrisk	NA
	IMDG Labels		IMDG Flash point	N/A
Air(ICAO/IATA)
	Proper Shipping Name	Potassium hydroxide, solution
	ICAO UnNo	1824
	ICAO Hazard Class	8	ICAO Packing Group	II
	ICAO subrisk	N/A	ICAO Labels	8, CAO
	ICAO Flash point	N/A
DOT/CFR(US Department of Transportation
	DOT Proper Shipping Name	Potassium hydroxide, solution
	Hazardous Material	Potassium hydroxide
	Hazard Class	8	Identification Number
	Product RQ (lbs)	3640	DOT subrisk	N/A
	DOTLabels	8	DOTFlashpoint	N/A

- Forbidden on passenger aircraft

Risk Phrases	Causes severe burns (R35)
Safety Phrases	In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, eye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

(R35: Causes severe burns. R41: Risk of serious damage to eyes.) The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Hold Clean XF

Need a quote for this product?

Navigation

Top Solvents

Central Supply Hub