Is a finishing method that uses an abrasive material to smooth surfaces.
Category
MSDS
| Porduct Name | Metal Polishing |
| Part Number | RXSOL-16-3742-005 |
Company Details:....
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| mail@rxmarine.com | |
| Website | www.rxmraine.com |
Substances
| Ingredient name | Classification | Concentration |
| Pumice | ≥1 - ≤5 | 1332-09-8 |
|
propan-2-ol
|
≥1 - ≤5 | 67-63-0 |
| ammonia | ≥1 - ≤5 | 1336-21-6 |
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification of the substance or mixture
| Classification of the substance or mixture |
FLAMMABLE LIQUIDS - Category 3
EYE IRRITATION - Category 2B
|
GHS label elements
| Signal word | Warning |
|
Hazard Statements |
Flammable liquid and vapor.
Causes eye irritation.
|
| Precautionary statements | |
| General | Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. |
| Prevention | Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosionproof electrical, ventilating, lighting and all material-handling equipment. Use only nonsparking tools. Take precautionary measures against static discharge. Keep container tightly closed. Wash hands thoroughly after handling. |
| Response | IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. |
| Storage | Store in a well-ventilated place. Keep cool. |
| Disposal | Dispose of contents and container in accordance with all local, regional, national and international regulations. |
| Supplemental label elements | None known. |
| Hazards not otherwise classified | None known. |
Description of first aid measures
| Eye contact | Consult a physician. Show this material safety data sheet to the doctor in attendance. |
| Inhalation | If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. |
| Skin contact | Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician. |
| Ingestion | Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. |
| Most important symptoms/effects, acute and delayed | Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. |
| Potential acute health effects | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Eye contact | Causes eye irritation. |
| Inhalation | No known significant effects or critical hazards. |
| Skin contact | No known significant effects or critical hazards. |
| Ingestion | No known significant effects or critical hazards. |
| Over-exposure signs/symptoms | |
| Eye contact |
Adverse symptoms may include the following:
irritation
watering
redness
|
| Inhalation | No specific data |
| Skin contact | No specific data |
| Ingestion | No specific data |
| Indication of immediate medical attention and special treatment needed, if necessary | |
| Notes to physician |
In case of inhalation of decomposition products in a fire, symptoms may be delayed.
The exposed person may need to be kept under medical surveillance for 48 hours.
|
| Specific treatments | No specific treatment. |
| Protection of first-aiders | No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. |
Extinguishing media
| Suitable extinguishing media | Use dry chemical, CO₂, water spray (fog) or foam. |
| Unsuitable extinguishing media | Do not use water jet. |
| Specific hazards arising from the chemical |
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of a subsequent explosion.
|
| Hazardous thermal decomposition products |
Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
nitrogen oxides
metal oxide/oxides
|
| Special protective actions for fire-fighters |
Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.
|
| Special protective equipment for fire-fighters | Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. |
Personal precautions, protective equipment and emergency procedures
| For non-emergency personnel | No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Shut off all ignition sources. No flares, smoking or flames in hazard area. Avoid breathing vapor or mist. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment. |
| For emergency responders | If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in "For nonemergency personnel". |
| Environmental precautions | Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). |
| Methods and materials for containment and cleaning up | |
| Small spill | Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor. |
| Large spill | Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. Note: see Section 1 for emergency contact information and Section 13 for waste disposal. |
Precautions for safe handling
| Protective measures | Put on appropriate personal protective equipment (see Section 8). Do not ingest. Avoid contact with eyes, skin and clothing. Avoid breathing vapor or mist. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do not enter storage areas and confined spaces unless adequately ventilated. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Store and use away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical (ventilating, lighting and material handling) equipment. Use only non-sparking tools. Take precautionary measures against electrostatic discharges. Empty containers retain product residue and can be hazardous. Do not reuse container. |
| Conditions for safe storage, including any incompatibilities | Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Eliminate all ignition sources. Separate from oxidizing materials. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. |
| Appropriate engineering controls | Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment. |
| Environmental exposure controls | Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels. |
| Individual protection measures | |
| Hygiene measures | Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. |
| Eye/face protection | Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: chemical splash goggles. |
| Skin protection | |
| Hand protection | Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties. It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be accurately estimated. |
| Body protection | Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. When there is a risk of ignition from static electricity, wear antistatic protective clothing. For the greatest protection from static discharges, clothing should include anti-static overalls, boots and gloves |
| Other skin protection | Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. |
| Respiratory protection | Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. Respirators must be used according to a respiratory protection program to ensure proper fitting, training, and other important aspects of use. |
Appearance
| Physical state | Liquid. [Viscous liquid.] |
| Colour | Opaque. Light tan. |
| Odor | Ammoniacal. |
| Odor threshold | Not available |
| pH | 9.6 to 10.2 |
| Melting point | Not available |
| Boiling point | Not available |
| Flash point | Closed cup: 40.56 to 43.33°C (105 to 110°F) |
| Evaporation rate | Not available. |
| Lower and upper explosive (flammable) limits | Not available. |
| Vapor pressure | Not available. |
| Vapor density | Not available. |
| Relative density |
1.104 to 1.14
materials.Extremely flammable in the presence of the following materials or conditions: oxidizing
materials.
|
| Solubility | Not available. |
| Partition coefficient: noctanol/water | Not available. |
| Auto-ignition temperature | Not available. |
| Decomposition temperature | Not available. |
| Viscosity | Dynamic (room temperature): 8000 to 11000 mPa·s (8000 to 11000 cP) |
| Reactivity | No specific test data related to reactivity available for this product or its ingredients |
| Chemical stability | The product is stable. |
| Possibility of hazardous reactions | Under normal conditions of storage and use, hazardous reactions will not occur. |
| Conditions to avoid | Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat or sources of ignition. |
| Incompatible materials |
Reactive or incompatible with the following materials: oxidizing materials
|
| Hazardous decomposition products | Under normal conditions of storage and use, hazardous decomposition products should not be produced. |
Information on toxicological effects
Acute toxicity
| Product/ingredient name | Result | Species | Dose | Exposure |
| propan-2-ol |
LD50 Dermal
LD50 Oral
|
Rabbit
Rat
|
12800 mg/kg
5000 mg/kg
|
- |
| ammonia | LD50 Oral | Rat | 350 mg/kg | - |
| Conclusion/Summary | Based on available data, the classification criteria are not met. |
Irritation/Corrosion
| Product/ingredient name | Result | Species | Score | Exposure | Observation |
| propan-2-ol |
Eyes - Moderate irritant
Eyes - Moderate irritant
Eyes - Severe irritant
|
Rabbit
Rabbit
Rabbit
|
- |
24 hours 100 milligrams
10 milligrams
100 milligrams
|
- |
| ammonia | LD50 Oral | Rat | 350 mg/kg |
Conclusion/Summary
| Skin | Based on available data, the classification criteria are not met. |
| Eyes | Based on Calculation Method: Causes serious eye irritation |
| Respiratory | Based on available data, the classification criteria are not met. |
| Sensitization | Not available. |
| Conclusion/Summary | |
| Skin | Based on available data, the classification criteria are not met. |
| Respiratory | Based on available data, the classification criteria are not met. |
| Mutagenicity | Not available. |
| Conclusion/Summary | Based on available data, the classification criteria are not met. |
| Carcinogenicity | Not available. |
| Conclusion/Summary | Based on available data, the classification criteria are not met |
Toxicity
| Product/ingredient name | Result | Species | Exposure |
| propan-2-ol |
Acute EC50 10100 mg/l Fresh water
Acute LC50 1400000 µg/l Marine water
Acute LC50 4200 mg/l Fresh water
|
Daphnia - Daphnia magna
Crustaceans - Crangon crangon
Fish - Rasbora heteromorpha
|
48 hours
48 hours
96 hours
|
| ammonia | Acute LC50 37 ppm Fresh water | Fish - Gambusia affinis - Adult | 96 hours |
Bioaccumulative potential
| Product/ingredient name | LogPow | BCF | Potential |
| propan-2-ol | 0.05 | low |
| Mobility in soil | |
|
Soil/water partition
coefficient (KOC)
|
Not available. |
| Other adverse effects | No known significant effects or critical hazards. |
| Disposal methods | The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Vapor from product residues may create a highly flammable or explosive atmosphere inside the container. Do not cut, weld or grind used containers unless they have been cleaned thoroughly internally. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. |
| DOT Classification | TDG Classification | IMDG | IATA | |
| UN number | UN1993 | UN1993 | UN1993 | UN1993 |
| UN proper shipping name |
FLAMMABLE
LIQUID, N.O.S.
(Isopropyl
alcohol)
|
FLAMMABLE
LIQUID, N.O.S.
(Isopropyl
alcohol)
|
FLAMMABLE
LIQUID, N.O.S.
(Isopropyl
alcohol)
|
FLAMMABLE
LIQUID, N.O.S.
(Isopropyl
alcohol)
|
| Transport hazard class(es) | 3 | 3 | 3 | 3 |
| Packaging group | III | III | III | III |
| Environmental hazards | No | No | No | No |
| DOT Classification | Limited Quantity |
| TDG Classification | Limited Quantity |
| IMDG | Limited Quantity |
| IATA | See DG List |
| Special precautions for user | Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage. |
|
Transport in bulk according
to Annex II of MARPOL and
the IBC Code
|
Not available. |
| U.S. Federal regulations | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
|
Clean Air Act Section 112
(b) Hazardous Air
Pollutants (HAPs)
|
Not listed |
|
Clean Air Act Section 602
Class I Substances
|
Not listed |
|
Clean Air Act Section 602
Class Il Substances
|
Not listed |
| DEA List I Chemicals (Precursor Chemicals) | Not listed |
| DEA List Il Chemicals (Precursor Chemicals) | Not listed |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |