METHYL RED SODIUM SALT ACS GRADE

pH indicator or indicator dye. It works by turning Red for pH levels under 4.4 and Yellow over 6.2

METHYL RED SODIUM SALT ACS GRADE excellent quality manufacturer, exporter and supplier. Methyl Red Sodium Salt ACS Grade is a pH indicator or indicator dye. It works by turning Red for pH levels under 4.4 and Yellow over 6.2. It becomes orange with a varying spectrum of shade intensities between those two levels. It comes in the form of a rich red crystalline powder.

RXSOL Methyl Red Sodium Salt – Laboratory pH Indicator & Analytical Reagent

Product Name: Methyl Red Sodium Salt
Brand: RXSOL – RX Marine International
Product Category: Laboratory Chemicals / Analytical Reagents / pH Indicators
Chemical Formula: C₁₅H₁₄N₃NaO₂
CAS Number: 845-10-3
Molecular Weight: 291.28 g/mol

Product Description

RXSOL Methyl Red Sodium Salt is a water-soluble azo dye used primarily as an acid-base indicator in analytical chemistry, laboratory testing, chemical analysis and educational applications.

It is the sodium salt form of methyl red, a widely used pH indicator that changes colour according to the acidity or alkalinity of a solution.

Methyl Red Sodium Salt is particularly useful for monitoring pH changes in the acidic range and is commonly employed in volumetric analysis, titration procedures, laboratory research and microbiological testing.

Unlike conventional methyl red, which has limited water solubility, its sodium salt form offers improved dissolution in aqueous solutions, making it convenient for preparing laboratory indicator solutions.

 

Application

Typical Quality Control Parameters

Test

Reference Criterion

Appearance

Orange to Brown powder

Identity

Conforms to reference standard

Solubility

Clear 0.1% aqueous solution

Visual Transition

Approximately pH 4.2–6.2

Loss on Drying

Maximum 5%, for selected reagent grades

Dye Content

Grade-specific

Packaging

Laboratory reagent bottles

These are reference criteria from commercial reagent specifications, not certified RXSOL results.

Dose

Preparation of 0.1% Methyl Red Sodium Salt Indicator Solution

For a general laboratory stock solution:

Ingredient

Quantity

Methyl Red Sodium Salt

0.10 g

Distilled or Deionized Water

Make up to 100 mL

Preparation: Dissolve the weighed powder in approximately 80 mL of distilled water, mix until dissolved, then make up to 100 mL. Label the solution and verify its colour response against appropriate pH buffers before use.

This is a general 0.1% w/v aqueous preparation. Use the concentration, solvent and storage period specified by the applicable analytical method.

Technical specifications
C.A.S. No. 845-10-3
CI NO. 13020
M.F. C15H14N3O2Na
M.W. 291.29gm/mole

Specifications:

Dye Content (by Spectrophotometry) >90%
Solubility 0.1%(Dist. water) Clear solution
Transition Range pH 4.5-6.2
  Violet red- Brownish Yellow
Absorption maximum (Dist. water) ?max 430-440nm
Absorptivity (A1%/1cm in Dist. water) at ?max >580
Loss On Drying (110°C) <5%

Standard Technical Specifications

Parameter

Typical Description

Chemical Name

Methyl Red Sodium Salt

CAS Number

845-10-3

Molecular Formula

C₁₅H₁₄N₃NaO₂

Molecular Weight

291.28 g/mol

Appearance

Dark red to reddish-brown powder

Chemical Class

Azo Dye

Solubility

Soluble in water

Indicator Transition Range

pH 4.4–6.2

Colour in Acidic Solution

Red

Colour in Alkaline Solution

Yellow

Primary Use

Acid-base indicator

Storage

Tightly closed container, protected from moisture and excessive heat

These are typical reference properties. Final RXSOL specifications, assay and packaging should be confirmed from the applicable batch COA.

Note

Key Features and Benefits

  • Water-soluble form of methyl red indicator

  • Distinct colour transition from red to yellow

  • Suitable for acid-base titration procedures

  • Useful in laboratory pH testing

  • Applicable in analytical chemistry and educational laboratories

  • Convenient for preparing aqueous indicator solutions

  • Suitable for selected microbiological testing methods

Remarks / Precaution

Storage and Handling

Store in a tightly sealed, properly labelled container in a cool, dry location protected from moisture and excessive light. Avoid dust generation and use appropriate laboratory gloves and eye protection. Follow the supplier's current SDS for handling and disposal.

RXSOL Methyl Red Sodium Salt Supplier in India, UAE and Oman

RXSOL supports enquiries for laboratory chemicals, analytical reagents, pH indicators and specialty chemical products across industrial and laboratory markets.

India: Mumbai, Kolkata, Chennai, Hyderabad, Ahmedabad, Surat, Vadodara, Varanasi and other major locations.

UAE: Dubai, Abu Dhabi, Sharjah, Ajman and Fujairah.

Oman: Muscat, Sohar, Salalah and other industrial locations.

Product grade, availability, packaging and delivery arrangements should be confirmed before ordering.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote WhatsApp +91 87529 36666 mumbaichems @ gmail.com