This additive is a potent pour point depressant of the polymethacrylate type, designed to give maximum pour point depression in a wide range of base oils. The product is used in both automotive and industrial lubricants.
For blended into lubricating base stocks imparts pour point depression extending the lubricants effective application temperature range. This pour point depressant is the most versatile product usable in all lubricants.
The recommended concentration for RXSOL Pour Point Dispersant is generally between 0.02 and 0.5% wt. with the exact dosage being determined by actual tests in the finished oil. Please contact your RX Chemical representative for specific recommendations.The treatment level would normally be expected to be in the region of 0.1 to 0.3%, though 0.5 to 1.0% can be required for some gear applications.
Typical Characteristics
Appearance - Clear to slight Pale Yellow Viscous Liquid
Density at 15°C, g/ml - 0.90
Viscosity at 100°C, mm²/s - 360
Flash Point (PMC), °C - 80
Key Performance Benefits
• Provides both viscosity index and pour point depressant characteristics.
• Can permit selection of less costly base stocks which have not received severe dewaxin.
| Product Name | RXSOL-81-8151-210 |
| Product Type | Pour Poin Dispersant (Polymethacrylate Base) |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujairah, Muscat
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
DESCRIPTION : Solution of alkyl acrylate polymer in Petroleum solvent.
| HAZ COMP | CAS NO. | CONC. | R-Phrase |
| Xylene | 1330-20-7 | 20-40% | R10, Xn; R20/21, Xi; R38 |
| Toluene | 108-88-3 | 20-40% | Xn. R11/20 |
| Poly Acrylate Proprietory Blend | --------- | ----- | ------- |
Information concerning particular for human and environment:
The product causes irritation of mouth and upper digestive tract
Irritation to skin.Irritating to eye May cause long term adverse effects in the aquatic environment
| EYE: | Flush with water for 15-20 minutes. Consult a doctor |
| SKIN: | Wash with water and soap and rinse thoroughly. |
| INHALATION: | Remove exposed person to fresh air. Get medical attention immediately |
| SWALLOING: | Do not induce vomiting. Seek medical advice |
| EXTINGUISHING MEDIA: | DO NOT USE DIRECT WATER JETS ON FIRE, BUT ONLY TO COOL SURROUNDING AREAS USE CARBON DIOXIDE, FOAM OR WATER SPRAY; USE MEANS OF HOLDING WATER USED IN SPRAY TO PREVENT ENTRY TO WATERCOURSES. Dry chemical,CO2,foam as suggested media. |
| FIRE FIGHTING EQUIPMENT: | Wear self-contained respiratory protective device |
Isolate spill area. Wear appropriate personal protection. Recover free product for recycle and/or disposal. Ensure adequate ventilation. Adsorb with liquid binding material such as sand,diatomite, saw dust. Prevent entry into sewers and waterways.
HANDLING:
Keep away from ignition sources. Ensure good ventilation a work place. Keep containers closed.
STORAGE:
Keep containers in well ventilated area and closed and sealed until ready to be used. Store away
from sources of ignition.
EXPOSURE CONTROL:
The product does not contain any ingredients that need monitoring at work place.
PERSONAL PROTECTIVE EQUIPEMENT:
Avoid contact with skin and eyes. Wear adequate gloves and safety glasses. Wear impermeable safety foot ware. In case of brief exposure use respiratory filter device.
| APPEARANCE : | Clear to slight Pale Yellow Viscous Liquid |
| ODOUR : |
Slightly Fatty Odour |
| SP. GRAVITY @ 30 C : |
0.90 Typical |
| VISCOSITY @ 100 C : |
50 TO 200 CST |
| FLASH POINT (COC) : |
>90 C |
| AUTO IGNITION TEMP. : |
Not established |
| EXPLOSION LIMITS : |
Not established |
| VAPOUR PRESS. @15C : |
Not established |
| SOLUBILITY : | Soluble in oils |
.
THERMAL DECOMPOSITION: Decomposition may occur if prolonged exposure at temperatures above 200 C.
DANGEROUS REACTIONS: No dangerous and hazardous reactions known.
HAZARDOUS DECOMPOSITION PRODUCTS: Methacrylate monomers. Solvent vapors if overheated
ACUTE TOXICITY:
ORAL: LD50> 5000 mg/kg (rat).
SKIN: Irritating to sking if exposure is prolonged.
EYES: Irritating to skin
SENSITIZATION: None known
ENVIRONMENT HAZARD : Contains solvents which may be dangerous to the envi.
ENVIRONMENT FATE : Contains components which may persist in the environment.
Must not be disposed along with household garbage. Material is non-hazardous and should be disposed in accordance with local authority regulations.
LAND TRANSPORT:
UN-NUMBER – 1307
PACKAGING GROUP – III
HAZARD LABEL -3
MARINE TRANSPORT :
IMDG CLASS – 3
UN-NUMBER – 1307
PACKAGING GROUP – III
HAZARD LABEL -3
AIR TRANSPORT
ICAO/IATA CLASS - 3
UN-NUMBER – 1307
PACKAGING GROUP – III
HAZARD LABEL -3
SYMOL
- Xn – Harmful
- Xi – Irritant
SAFETY PHRASE (S)
- S24/S25 – Avoid contact with skin & eyes
- S26 – In case of contact with eyes, rinse with plenty of water. Seek doctors aid immediately
- S36/37/39 – Wear suitable PPE
- S61 – Avoid environmental release
- S60 – Dispose as hazardous waste
RISK PHRASE (R)
- R20/21 – Harmful by inhalation or contact with skin
- R22 – Harmful if swallowed
- R38 - Irritating to skin
- R41- Risk of serious damage to eyes
Information contained in the MSDS is based on our present knowledge but no guarantees,warranties of any kind are to be made as to its accuracy, suitability for a particular application. RX MARINE INTERNATIONAL shall not be liable for any loss or damage based upon the criteria supplied by the developers of these rating systems, together with RX MARINE INTERNATIONAL’s interpretation of the available data.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.