RXSOL ORG CAK 2465

It is a powder alkaline product used for cleaning zinc zamak aluminum metals and their alloys polishing residues shaping oils hardened oil layers.
Category

It is a powder alkaline product used for cleaning zinc zamak aluminum metals and their alloys polishing residues shaping oils hardened oil layers.

MSDS

Product Name               RXSOL ORG CAK 2465  
Part Number   RXSOL-10-3247-025

Company Details:....

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA  

Phone +91 22 20871200 - 1400
Fax +91 22 27612100 :::AOH :0091 9821214367
Email mail@rxmarine.com
Website www.rxmraine.com

Substances

Hazardous Component(s) CAS Number Percentage                          
Sodium hydroxide 1310-73-2 10 - 30
Sodium metasilicate 6834-92-0 10 - 30
Sodium phosphate, tribasic   7558-79-4 10 - 30
Surfactant Proprietary 1 - 5
Diethylene glycol monobutyl ether    112-34-5    1 - 5

Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

Precautionary Statements

Prevention Keep only in original container. Do not breathe dust or fumes. Wash thoroughly after handling. Wear protective gloves, eye protection, and face protection.
Response IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to remove. Continue rinsing. Immediately call a poison control center or physician. Wash contaminated clothing before reuse. Absorb spillage to prevent material damage.
Storage Store locked up. Store in corrosive resistant container with a resistant inner liner.
Disposal Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Inhalation If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Skin contact Remove contaminated clothing and footwear. For skin contact, flush with large amounts of water. Seek immediate medical attention.
Eye contact In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Ingestion Get medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Symptoms See Section 11.
Notes to physician This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.

Extinguishing media     Use media appropriate for surrounding material.
Special firefighting procedures Wear full protective clothing. Wear self-contained breathing apparatus
Unusual fire or explosion hazards
Not a fire hazard.
Hazardous combustion products Irritating and toxic gases or fumes may be released during a fire.

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental precautions Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Do not allow product to enter sewer or waterways.
Clean-up methods
Sweep up or gather material and place in appropriate container for disposal.
Dispose of according to Federal, State and local governmental regulations.

Handling   Avoid contact with eyes, skin and clothing. Considerable heat is generated when water or acid is added, therefore when making solutions always add the caustic to the water or acid with constant stirring. If caustic substance or solution becomes concentrated in one area, or if added too rapidly or if added to hot or cold water a rapid temperature increase can result in dangerous boiling water and/or splashing or may cause immediate violent eruption. Wash thoroughly after handling. Do not breathe dust. For industrial use only. Provide adequate ventilation.
Storage Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure controls and protective equipment for each task performed.

Hazardous Component(s) ACGIH TLV                OSHA PEL               AIHA WEEL         OTHER             
Sodium hydroxide 2 mg/m3 Ceiling 2 mg/m3 PEL None  None 
Sodium metasilicate None  None  None  None 
Sodium phosphate, dibasic
None 
None  None  None 
Surfactant      None  None  None  None 
Diethylene glycol monobutyl ether    
10 ppm TWA
Inhalable fraction and
vapor.
None  None 
50 ppm TWA
75 ppm STEL
Engineering controls Ventilation should effectively remove and prevent buildup of any dust generated from the handling of this product.
Respiratory protection If ventilation is not sufficient to effectively prevent buildup of dust, appropriate NIOSH/MSHA respiratory protection must be provided.
Eye/face protection Wear chemical goggles or a full face shield.
Skin protection Chemical resistant, impermeable gloves. Gloves should be tested to determine suitability for prolonged contact. Use of impervious apron and boots are recommended.

Physical state Powder
Colour Tan
Odor Mild surfactant
Odor threshold Not available.
pH 12.9 (1% solution)
Vapor pressure Not applicable
Boiling point/range Not applicable
Melting point/ range Not determined
Specific gravity 1.03
Vapor density Not applicable
Flash point Not applicable
Flammable/Explosive limits - lower Not available.
Flammable/Explosive limits - upper   Not available.
Autoignition temperature Not applicable
Flammability Not applicable
Evaporation rate Not determined                         
Solubility in water Appreciable
Partition coefficient (n-octanol/water) Not determined
VOC content Not applicable
Viscosity Not available.
Decomposition temperature Not available.

Stability                 Stable at normal conditions
Hazardous reactions Will not occur.
Hazardous decomposition products Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Incompatible materials This product may react with strong acids or oxidizing agents. 
Reactivity
Not available.
Conditions to avoid Store away from incompatible materials.

Relevant routes of exposure Skin, Inhalation, Eyes
Potential Health Effects/Symptoms  
Inhalation Mists, vapors or liquid may cause severe irritation or burns.
Skin contact Corrosive to the skin. Contact with the skin or mucous membranes may cause severe irritation and burns.
Eye contact This product is severely irritating to the eyes and may cause irreversible damage including burns and blindness.
Ingestion This product may produce corrosive damage to the gastrointestinal tract if it is swallowed.
Hazardous Component(s)    LD50s and LC50s Immediate and Delayed Health Effects
Sodium hydroxide None  Irritant, Corrosive, Eyes
Sodium metasilicate Oral LD50 (RAT) = 1,280 mg/kg Irritant, Corrosive, Eyes
Sodium phosphate, dibasic Oral LD50 (RAT) = 17 g/kg Irritant, Corrosive
Surfactant None No Records
Diethylene glycol monobutyl ether 
Oral LD50 (RABBIT) = 2,200 mg/kg
Oral LD50 (RAT) = 4,500 mg/kg
Oral LD50 (RAT) = 5,660 mg/kg
Oral LD50 (RAT) = 7,292 mg/kg
Oral LD50 (RAT) = 6,600 mg/kg
Oral LD50 (RAT) = 6,560 mg/kg
Dermal LD50 (RABBIT) = 2,700 mg/kg
Dermal LD50 (RABBIT) = 4,120 mg/kg
Blood, Central nervous system, Irritant, Kidney
Hazardous Component(s)                  NTP Carcinogen        IARC Carcinogen                
OSHA Carcinogen
(Specifically Regulated)   
Sodium hydroxide No No No
Sodium metasilicate No No No
Sodium phosphate, dibasic No No No
Surfactant No No No
Diethylene glycol monobutyl ether No No No

Ecological information          No data available.                      

Information provided is for unused product only

Recommended method of disposal          Follow all local, state, federal and provincial regulations for disposal. This product contains a chelating agent. This chemical contains phosphates.  
Hazardous waste number Material, if discarded, is not expected to be a characteristic hazardous waste under RCRA.

U.S. Department of Transportation Ground (49 CFR)  
Proper shipping name Proper shipping name: Corrosive solid, basic, inorganic, n.o.s. (Sodium hydroxide, Sodium metasilicate)
Hazard class or division 8
Identification number UN 3262
Packing group II
DOT Hazardous Substance(s) Sodium hydroxide, Sodium phosphate, dibasic
International Air Transportation (ICAO/IATA)  
Proper shipping name Proper shipping name: Corrosive solid, basic, inorganic, n.o.s. (Sodium hydroxide, Sodium metasilicate)
Hazard class or division 8
Identification number UN 3262
Packing group II
Water Transportation (IMO/IMDG)  
Proper shipping name CORROSIVE SOLID, BASIC, INORGANIC, N.O.S. (Sodium hydroxide, Sodium metasilicate)
Hazard class or division 8
Identification number UN 3262
Packing group II

United States Regulatory Information

TSCA 8 (b) Inventory Status All components are listed as active or are exempt from listing on the Toxic Substances Control Act (TSCA) inventory.
TSCA 12 (b) Export Notification
None above reporting de minimisNone above reporting de minimis
None above reporting de minimis
CERCLA/SARA Section 302 EHS None above reporting de minimis
CERCLA/SARA Section 311/312 Immediate Health, Delayed Health
CERCLA/SARA Section 313 This product contains the following toxic chemicals subject to the reporting requirements of section 313 of the Emergency Planning and Community Right-To-Know Act of 1986 (40 CFR 372). Nonylphenol ethoxylate (CAS# 127087-87-0).
CERCLA Reportable quantity Sodium phosphate, dibasic (CAS# 7558-79-4) 5,000 lbs. (2,270 kg) 
California Proposition 65 This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. This product contains a chemical known in the State of California to cause cancer.
Canada Regulatory Information  
CEPA DSL/NDSL Status All components are listed on or are exempt from listing on the Canadian Domestic Substances List.

Other Information

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  weassume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International  has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@mumbaichemical.com