A FAST ACTING SPECIALTY NON-FLAMMABLE SOLVENT ENGINEERED with N-PROPYL BROMIDE FOR UTILITY USE of INDUSTRIAL DEGREASING purpose , This is very effective replacement of 1,1,1 Tri Chloro Ethane , which create eco & Health care problem. This products evaporates completely without any residue.
NON CARCINOGENIC
NON TOXIC
NON HAZARDOUS,
ENVIRONMENTAL FRIENDLY,
SUITABLE FOR ALL METALS PLASTIC,
STRESS CORROSION AND HYDROGEN EMBRITTLEMENT AND A NUMBER OF OTHER COMMONLY USED APPLICATION
May cause skin drying, This product should be used in an area having at least normal room ventilation. The use, of solvent resistant gloves & goggles is recommended. Wash hands after use.
MEETING ASTM D-6368
1 .Apply materials to item using saturated cloth, brush or dip the item into the RXSOL liquid.
2.Allow 1-2 minutes for RXSOL-10-1744-025 to dissolve grease.
3.Use agitation or longer soak times for heavily soiled Items,
4.Wipe dry with a clean cloth, or use forced air to accelerate evaporation. A thin film of RXSOL-10-1744-025 will evaporate completely in 5-8 minutes.
5.Repeat stops 1-4 as needed.
A FAST ACTING SPECIALTY SOLVENT ENGINEERED FOR UTILITY USE
RXSOL-10-1744-025
· RXSOL-10-1744-025 contains hydrocarbons. If ingested, do not induce vomiting.
· RXSOL-10-1744-025 fumes are non toxic, non narcotic and have a fresh citrus odor. Use in areas having at least normal room ventilation.
· RXSOL-10-1744-025 is minimally irritating if splashed into eyes, Wash, eyes with water for 15 minutes.
· RXSOL-10-1744-025 is combustible under specific conditions not encountered during normal use. Keep away from open flames and ignition sources. Use recommended cleaning procedures.
Caution: Do not immerse natural rubber items in RXSOL-10-1744-025 for extended Periods of time as swelling may occur.
| Product Name | RXSOL-10-1744-025 |
| Product Type | Solvent Cleaner NON HAZARDOUS |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
COMPONENTS -COMMON NAME |
CAS Number |
SARA
III LIST
|
Applicable PEL-OSHA |
Exposure Limits TLVACGIH |
Carcinogen
Ref. Source **
|
|
Petroleum Distillates |
64742-47-8 | No | 5.0 mg/m3 | 5.0 mg/m3 | d |
| Monocylic terpene | 5989-27-5 | No |
|
PRIMARY ROUTES OF ENTRY: |
[ X ] INHALATION [ ] INGESTION [ ] SKIN ABSORPTION [ ] EYE [ ] NOT HAZARDOUS |
|
ACUTE EFFECTS |
Toxicity: CNS depression producing headache, dizziness, nausea and loss of consciousness. |
|
Inhalation: |
High concentrations or prolonged exposure to lower concentrations may be slightly irritating to mucous mem branes |
|
Eye Contact: |
Slight irritation from short term contact. Prolonged & repeated contact more irritating. |
|
Skin Contact: |
Prolonged & repeated liquid contact may result in irritation and dermatitis. |
|
Ingestion: |
May result in vomiting. Aspiration of vom itus into lungs must be avoided as lung contact can result in chemical pneumonitis and pulmonary edema. |
| CHRONIC EFFECTS: | None known. |
| Medical Conditions Generally Aggravated by Exposure: | Pre-existing irritation of skin or mucous membranes. |
|
Eye Contact: |
Flush with water for 15 minutes. If irritation persists, get medical attention. |
|
Skin Contact: |
Wash with soap and water. If irritation persists, get medical attention |
|
Inhalation: |
Remove to fresh air. Provide oxygen if breathing is difficult. Get medical attention. |
|
Ingestion: |
DO NOT INDUCE VOMITING. Drink 3 to 4 glasses of water. Get immediate medical attention. |
|
FLAMMABILITY as per USA FLAME PROJECTION TEST (aerosols)
|
N/A
N/Auto Ignition TemperatureE
|
|
Auto Ignition Temperature
|
N/D |
| Flammability Limits in Air by % in Volume: | |
| % LEL: | 1 |
| % UEL: | 6 |
| FLASH POINT AND METHOD USED (non-aerosols): | 142ºF TCC |
| SPECIAL FIRE FIGHTING PROCEDURES: |
Do not enter confined fire space without proper protective equipment including NIOSH approved self -contained breathing apparatus. Cool fire exposed containers, surrounding equipment & structures with water.
|
| EXTINGUISHER MEDIA: |
Water spray or fog, foam, dry chemical or CO2. Do not use direct water stream.
|
| Unusual Fire & Explosion Hazards: | None known. |
--------------------
|
Steps To Be Taken If Material Is Spilled Or Released: |
Contain spill. Keep out of surface waters & any sewers or water courses entering or leading to surface waters. Soak up with inert absorbent & place in properly labeled leak -proof containers for disposal. |
|
Waste Disposal Methods: |
Dispose of in accordance with all local, state and federal regulations. |
| Precautions To Be Taken In Handling & Storage: |
Store in original shipping containers away from heat, open flame & oxidizing materials. Keep closed when not in use. Shelf life 1 year.
|
| Other Precautions &/or Special Hazards: | KEEP OUT OF REACH OF CHILDREN. Read & follow label directions |
|
Respiratory Protection (specify type): |
As required to prevent overexposure. NIOSH approved air purifying respirator for organic vapors or atmospheresupplying respirator. |
|
Protective Gloves: |
As required to minimize skin contact. |
|
Eye Protection: |
Safety glasses or goggles |
| Ventilation Requirements: | Explosion proof ventilation as required to control vapor concentrations. |
| Other Protective Clothing & Equipment: | Clothing as required to minimize skin contact. Eyewash station and safety shower. |
| Hygienic Work Practices: | Do not eat, drink or smoke in work area. Wash hands after handling. |
|
Boiling Point: |
370ºF - 550°F |
|
Specific Gravity (H2O=1): |
0.80 |
|
Vapor Pressure.980 mmHg @ 77° F |
N/A |
|
Vapor Pressure (Non-Aerosols)(mm Hg and Temperature): |
5@100ºF |
|
Vapor Density (Air = 1): |
5 |
| Ev a peo r a t i o n Ra t e ( = 1) : | .10 |
| Solubility in Water: | Negligible |
| Water Reactive: | No |
| Appearance and Odor: | clear liquid with light citrus odor . |
| V.O.C. | 804 g / l |
|
STABILITY |
[ X ] STABLE [ ] UNSTABLE |
|
HAZARDOUS POLYMERIZATION |
[ ] WILL [ X ] WILL NOT OCCUR |
|
Incompatibility (Mat. to avoid): |
Oxidizing materials. |
| Conditions to Avoid: | Oxides of carbon & unidentified organics may be formed during combustion. |
Route of Entry: Eye contact, Skin absorption/contact, Inhalation and Ingestion
Effects of Acute Overexposure to Product:
Eye Contact: May cause temporary eye irritation, redness, tearing and blurred vision
Skin Contact: May cause skin irritation, defatting and dermatitis
Inhalation: Inhalation of mist or vapor may cause temporary respiratory irritation; temporary central nervous system effects including dizziness, weakness, fatigue, nausea, headache and possible unconsciousness.
Ingestion: May cause temporary gastrointestinal irritation with nausea, vomiting and diarrhea aspiration into the lungs can cause chemical pneumonitis.
Effects of Chronic Overexposure to Product:
Exposure limits: N/D for mixture
Teratogenicity: None
Reproductive toxicity: None
Sensitization to Product: None known
Mutagenicity: None
Carcinogenicity: None
Please refer to Section 6 for information regarding accidental releases and Section 15 for regulatory reporting information.
Dispose of in accordance with federal, state and local regulations. Prevent run-off to sewers.
Shipping paper description: NONE-EXEMPT
Labeling: NONE-EXEMPT
Markings: CONSUMER COMMODITY, ORM-D
Placard: NONE-EXEMPT
Packaging: Inner package not over 5.0 liters (1 gallon) each, in strong outer packaging. UN specification packaging not required.
TSCA: All chemicals used in this product are listed
CERCLA: No
SARA Title III: Under the provisions of Title III, Sections 311/312 of the Superfund Amendments and Reauthorization Act, this product is classified into the immediate health hazard category. The chemicals used in this product may be subject to the provisions of the Community Right-to Know Act (40 CFR 370 - 374). If reporting requirements are met, please contact the Environmental, Health and Safety (EHS) Manager for information regarding this product.
This document is prepared in accordance with 29 CFR 1910.1200. The purpose of this section is to ensure that the hazards of all chemicals produced or imported are evaluated, and that information concerning their hazards is transmitted to employers and employees.
All information appearing herein is based upon data obtained from the raw material manufacturer and/or recognized technical sources. While the information above is believed to be true and accurate, the author makes no representations as to its accuracy or sufficiency. Conditions of use are beyond the manufacturer's control; therefore the users are responsible to verify this data under their own particularconditions, applications and regulations to determine if the product is suitable for their particular purposes. The users assume all risks of product use, handling, disposal, reliance upon, publication or use of the information contained herein. This information applies only to the product designated above and does not necessarily apply to its use in combination with other materials, products, chemical compounds, structures or processes.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.