Powerful & Concentrated Emulsifying Cleaner, Classified Heavy-Duty Degreaser for Oil, Grease, and Sludge Removal. Tankclean ECO is concentrated formulation designed to break down and emulsify heavy oils, grease, carbon deposits, removal of coaltar, crude benzene, lube oils, Petroleum distillate, pyrolyze gas oil, bitumen & similar and petroleum-based sludge. It is especially effective in demanding environments such as marine vessels, refineries, engine rooms, and industrial plants.
Common Recommended Dilution of Tank Clean ECO:
-
Heavy Deposits: Use undiluted or 1:1 with water
-
Light Cleaning: Dilute up to 1:10 depending on contamination level
RXSOL Tankclean Eco is designed for the removal of: heavy mineral oils and greases, dopes, additives, lubricants, asphalt, distillation residues, coal tar, several synthetic resins, paraffines (e.g. slackwax), inert gas soot, vegetable,fish and animal oils and fats, fatty acid and greases, crude palm oil, styrene, palm fatty acids.
Directions of use
Cleaning of cargo and storage tanks by means of recirculation method.
Prewash:-
Before cleaning with Rxsol Tankclean ECO, it is necessary to prewash the tanks with hot or cold water, depending
on the type of cargo.
Recirculation method:-
Caretank ECO is added to a mixing tank containing sufficient quantity of water in order to obtain a good recirculation.
The water is heated by means of the heating coils, cargo heat exchanger or butterworth heater.The tanks are washed by means of a loading pump, after which the solution used is recycled to the mixing tank. One solution is most often used to wash 1 – 4 tanks.Tankclean ECO must be recirculated as a 0.2 – 0.5 % emulsion (dependent on the nature of the contamination). Allow this emulsion to circulate for 2 – 4 hours at the temperature of 10-60 °C (depending on type of cargo).
Direct Injection:-
Inject 0.1 to 0.2 litres of Tankclean ECO per every 100 litres of water into the washing system.Maintain cleaning temperatures between 10-60 °C (depending on type of cargo).Cleaning time 2 to 6 hours, followed by thorough rinsing with fresh hot water.
Properties:
Specific gravity (at 20°C) : >1
Flash point (10%) : ± 70 °C
pH (10%) : 10.0
Colour : Green / Colourless
Odour : Citrus
Application Methods For Tank Clean ECO:
-
Spray
-
Brush
-
Soak
-
Circulation or high-pressure wash systems
HEAVY DUTY TANKCLEANER MANUFACTURED FROM NATURAL RAW MATERIALS
WHICH CONTAINS NO CHLORINATED OR AROMATIC HYDROCARBONS
• More effective than solvent cleaners.
• Non-toxic and environmentally safe.
• Safe to use because of its high flashpoint.
• Completely biodegradable.
• Replaces most conventional tankcleaners and cleaners.
Key Features of Tankclean ECO:
-
Strong Emulsifying Action: Breaks down stubborn hydrocarbon residues and converts them into easy-to-rinse emulsions.
-
Highly Concentrated: Can be diluted for economy or used neat for tough cleaning jobs.
-
Multi-Surface Application: Safe for use on steel, painted surfaces, and most industrial equipment when used as directed.
-
Versatile Use: Suitable for cleaning tanks, bilges, engine parts, floors, cargo holds, machinery, and workshop surfaces.
-
Water Rinsable: Leaves residue free after rinsing with fresh water.
210 Ltrs</p>
| Product Name | RXSOL-20-2035-025 |
| Product Type | Tankclean ECO Emulsifying Cleaning Agent |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point ::: Mumbai, Kandla, Visakhapatnam - Gangavaram, Kolkata - Haldia, Chennai - Ennore, Fujairah, Muscat OMAN
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
IONIC – SURFACTANT , FATTY ALCOHOL, Ingredients NOT CLASSIFIED AS HAZARDOUS
| Ingestion | Harmful, if ingested. |
| Inhalation | Inhalation does not produce any side effect . |
| Skin Contact | Non Irritation |
| Eye Contact | Cause Irritation |
| Environmental Hazards | None |
| Human Health Hazards | Moderates |
| Ingestion | Induce vomiting & seek medical attention |
| Inhalation | Remove to fresh air |
| Eye Contact | Flush with water for at least 15 minutes. |
| Extinguishing Media | Non combustible product |
| Suitable | Use extinguishing media like foam dry Co2 , water-spray. |
| Not suitable | Not applicable |
| Special | Not applicable |
| Protection of fire Fighter | Not applicable |
- Bio-Degradable
- Non- Hazardas
| Handling | None , Avoid contact with eye |
| Storage | General Storage |
| Methods of cleaning | Flush Spill Area with Water |
| NOTE | Keep Container Tightly Closed |
| Respiratory System Protection | Not required |
| Eye Protection |
Properties
|
Appearance |
Green liquid / Clear ( Colour is only for product identification, Not playing any role in cleaning action ) |
|
Density |
In g/cm3 at 20°C: 1.05 |
| Flash point (10%) | Non Flammable |
| pH (10%) | 12.0 - 12.5 |
| Colour | Clear |
| Odour | Citrus |
|
Compatibility |
|
|
Metal |
No known effect |
|
Rubber |
No known effect |
|
pH (10%) |
Alkaline ( 10.00) |
|
Flash point |
Not Applicable |
|
Solubility |
100% soluble in water |
|
Packaging |
Size (in 210 Litres) |
| Condition to Avoid | Heat, Flame & Other Sources of Ignition |
| Materials to Avoid | Do not subject to Acidic/Highly Alkaline/Oxidizing Agents. |
| Hazardous Decomposition Products | Do not occur (Bio-Degradable) |
| Skin Irritation | No. |
| Eye Irritat | Moderate |
| Sensitization | Not Sensitizing |
| Chronic Toxicity | Not Identified |
| Carcinogencity | No. |
(All above information as per data available with us)
| 1) Comment | Not applicable | |
| 2) Ecotoxicity | Not applicable |
Disposal methods Small amounts may be flushed with water to sewer. Larger volumes must be sent to approved plant for destruction. Dilute with water, neutralise with HCl, discharge to sewer with plenty of water. Confirm disposal procedures with environmental engine and local regulations.Waste class Hazardous waste in accordance with EU directives. 06 02.
| ROAD TRANSPORT (ADR) | ||
| ADR class | Not dangerous according to ADR | |
| RAIL TRANSPORT (RID) | ||
| RID class no. | N/A | |
| SEA TRANSPORT (IMDG) | ||
| IMDG class | N/A | |
| AIR TRANSPORT (IATA/ICAO) | ||
| IATA/ICAO class | N/A | |
Symbol(s)
Contains C6 Alkylglucoside
Fatty alcohol ethoxylate
Tetrapotassium pyrophosphate
Disodium metasilicate
Potassium hydroxide
|
Risk phrases |
R-41 Risk of serious damage to eye. R-38 Irritating to skin. |
|
Safety phrases |
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S-2 Keep out of reach of children. |
Explanations of R-phrases in Section 2 R-22 Harmful if swallowed. R-34 Causes burns. R-35 Causes severe burns. R-37 Irritating to respiratory system. R-41 Risk of serious damage to eye.
* Information revised since previous SDS version
User notes: The information presented herein has been compiled from sources considered to be dependable and is accurate to the best of the sellers knowledge or has been generated to be the best of our ability without extensive research beyond our understanding or economic feasibility. Seller makes no warranty whatsoever, expressed, implied or of merchantability of the product, or of result obtained from this report. If data do not meet your needs, consult your supplier before using this product Seller assumes no resposibility for injury to buyer or third party or for any demage to any property. Buyer assumes all such risks.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.