Live Chat
Description
Product Technical bulletin
Product label
Toxic if swallowed, Cause burns Harmful to aquatic organisms may cause lung -term adverse effects in the aquatic environment in case of contact with eyes, rinse immediately with plenty of water & seek medical advice Wear suitable protective clothing, gloves and eye/face protection. in case of accident or if you feel unwell seek medical advice immediately )show the label where possible) use only in well ventilated areas. Avoid release to the environment. Refer to special instructions / safety data sheets
Industrial applications: Aqueous Heavy Duty cleaner for the marine industry
Put on appropriate personal protective equipment (sea section 8). Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed Workers should be wash hands and face before eating, drinking and smoking. Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest. If during normal se the material presents or respiratory hazard. Use only with adequate ventilation or wear appropriate respirator. Keep in the original container or an approved alternative made from a compatible, kept tightly closed when not in use. Keep away from acids. Empty containers again product residue and can be hazardous. Do not reuse container
Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well ventilated area away from incompatible materials and food and drink separate from acid Keep container tightly closed and sealed until ready use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. Not applicable.
No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering do not touch or walk through spilled material. Avoid breathing vapor or mist provide adequate ventilation Wear appropriate respirator when ventilation is inadequate put on appropriate personal protective equipment
DOSAGE:- For general degreasing and cleaning apply EDGE at a 2 5% concentration in water to the surface to be cleaned by brushing or swabbing. Allow EDGE to penetrate and lift soil for approximately 5 minutes cleaning with edge inject it with the wash water supply at a rate of 2 to 8 liters per ton. For bilge cleaning EDGE should be dosed at the rate of 1 liter per ton of bilge capacity of water used. Apply heat and allow EDGE to soak into soil before rinsing