Live Chat
Description
Coil Cleaner manufacturer in Mumbai, Chennai, Kolkata – supplier of coil cleaner in Gandhidham, Surat, Vizag, Chennai and Exporter from Mumbai to Kuwait and Middle East. This coil cleaner is specially formulated for use as a coil cleaner of cooling coils of the airconditioning systems of Engine sector.
Self-rinsing – specially blended to be gradually rinsed by the natural condensation of cooling systems. This “no-rinse” feature saves valuable time and labor costs.
Product Technical bulletin
DESCRIPTION:
This coil cleaner is specially formulated for use as a coil cleaner and filter adhesive for cooling coils of the airconditioning systems.
CHARACTERISTICS, ADVANTAGES & APPLICATIONS:
- Self-rinsing – specially blended to be gradually rinsed by the natural condensation of cooling systems. This “no-rinse” feature saves valuable time and labor costs.
- Environmentally safe – non-toxic, non-corrosive and non-flammable in nature, RXSOL-16-1697-025 can be safely used even in food processing areas.
- Fast cleaning – RXSOL-16-1697-025, units can be cleaned without the inconvenience of dismantling or removal.
- Safe on equipment – RXSOL-16-1697-025 is non-acidic, non-caustic and can be safely used on copper,aluminum, steel or plastic materials normally used in air-conditioning equipment.
- Enhance filter performance – RXSOL-16-1697-025 can be used as a filter adhesive to form a tacky meshwork that entraps particles too small to be captured by the filter itself. This will significantly reduce dirt recirculation and resulting in marked increase in system efficiency. Entrapped dirt and
- other foreign particles can be easily removed by rinsing the filter. This application is ideal for permanent-type filter systems.
- Deep cleaning action – RXSOL-16-1697-025 works by penetrating deeply to break-down grime and other contaminants to restore chiller efficiency. It helps control odors by eliminating rancid or other oily deposits that attracts malodor releasing bacteria.
TYPICAL PHYSICAL PROPERTIES
| Color : |
Light Brown |
| Specific gravity (25°C) : | 1.01 |
| Flash Point : | Not applicable |
Where used:
In wall units remote cooling ceiling units. Refrigeration chiller coils or any chiller and cooler units of airconditioning systems.
Direction of use
As filter adhesive – Spray concentrated RXSOL-16-1697-025 onto filter. A quick rinse with water is all that’s necessary to clean the filter.
- Cleaning air conditioner coils
- Dilute one part RXSOL-16-1697-025 with three part water. For heavier dirt build-up units, dilute with two parts water.
- Switch off the unit to be cleaned.
- Spray directly onto coils to cover entire area.
- Allow 2 – 5 minutes for RXSOL-16-1697-025 to penetrate the build-up deposits.
- Turn on unit for normal operation to create condensation on the chiller coils and tins that will gradually rinse RXSOL-16-1697-025 and loosen soils down into condensation pan or drain.
SAFETY AND HANDLING
| HANDLING | Handle with care. Store in dry, cool and well ventilated environment |
| SAFETY | IMMEDIATE ACTIONS |
| Eye Contact | Avoid Eye Contact. Otherwise, flush with plenty of water for a few minutes. Seek medical attention. |
| Skin Contact | Avoid Skin contact. Otherwise, wash contaminated area thoroughly with water. Seek medical attention. |
| Inhalation | Do not breathe gas/vapors. Otherwise, seek fresh air source at once.Seek medical attention. In case of insufficient ventilation, wear suitable respiratory equipment.. |
| If Swallowed | Avoid ingestion. Otherwise, consume considerable quantity of water.Do not induce vomiting. Seek medical attention. |
| General instructions | Avoid spillage, splashing and mishandling. Precautionary measures for body protection are strongly recommended before use. |
PACKING SIZE: 25 LITER, 210 LITERS PAIL/DRUM : Read the Material Safety Data Sheet before using this product For detailed information on safety and health, please refer to Material Safety Data Sheet and/or product label.
Product label
This coil cleaner is specially formulated for use as a coil cleaner and filter adhesive for cooling coils of the airconditioning systems. Dilute one part RXSOL-16-1697-025 with three part water. For heavier dirt build-up units, dilute with two parts water. Allow 2 – 5 minutes for RXSOL-16-1697-025 to penetrate the build-up deposits.
Self-rinsing – specially blended to be gradually rinsed by the natural condensation of cooling systems. This “no-rinse” feature saves valuable time and labor costs.
Environmentally safe – non-toxic, non-corrosive and non-flammable in nature, RXSOL-16-1697-025 can be safely used even in food processing areas.
Fast cleaning – RXSOL-16-1697-025, units can be cleaned without the inconvenience of dismantling or removal.
Safe on equipment – RXSOL-16-1697-025 is non-acidic, non-caustic and can be safely used on copper,aluminum, steel or plastic materials normally used in air-conditioning equipment.
Enhance filter performance – RXSOL-16-1697-025 can be used as a filter adhesive to form a tacky meshwork that entraps particles too small to be captured by the filter itself. This will significantly reduce dirt recirculation and resulting in marked increase in system efficiency. Entrapped dirt and other foreign particles can be easily removed by rinsing the filter. This application is ideal for permanent-type filter systems.
Deep cleaning action – RXSOL-16-1697-025 works by penetrating deeply to break-down grime and other contaminants to restore chiller efficiency. It helps control odors by eliminating rancid or other oily deposits that attracts malodor releasing bacteria.