Description
Air Cooler Cleaner Alakaline ( Foam N Clean )
Acts as a Condenser Coil Re-Conditioner
Its special penetrating agents quickly emulsify & break up oily grime, dirt and air-borne industrial impurities.
Super high foaming, deodorized, alkaline coil cleaner recommended for cleaning and brightening aluminum finned cooling and heating coils, condensers and evaporators. It’s strong foaming action penetrates beneath contamination and pushes dirt and grease from the coil to the outer surface.
Product Description:-
RXSOL-16-1040-020 non-acid coil cleaners developed to provide foaming and brightening capabilities comparable to acid-based coil cleaners…without the dangers of hydrofluoric acid. for cleaning of Air coolers, Scavenging air systems and turbochargers of diesel engine.
Excellent grease-cutting capability.
High foaming action-penetrates deep into multi-row coils to foam out dirt,grease and grime.
One step cleaner-cleans,brightens and deodorizes.
Typical Cleaning Method :-
Dilute 1-3 parts water and apply with alow pressure sprayer. Leave on coils for 3-7 minutes then flush with water until all foam is removed. If use don built up roofsetc., it is important to make sure all residual cleaner is washed off roof surface after application. If good housekeeping practices are not followed, roof deterioration is possible. If used indoors, strong fumes may cause irritation to sensitive individuals evacuate area if necessary.
Product Technical bulletin
Air Cooler Cleaner Alakaline ( Foam N Clean )
RXSOL-16-1040-020
Cleaner for Air Coolers and Turbo
Product Description:-
RXSOL-16-1040-020 non-acid coil cleaners developed to provide foaming and brightening capabilities comparable to acid-based coil cleaners…without the dangers of hydrofluoric acid. for cleaning of Air coolers, Scavenging air systems and turbochargers of diesel engine.
Excellent grease-cutting capability.
High foaming action-penetrates deep into multi-row coils to foam out dirt,grease and grime.
One step cleaner-cleans,brightens and deodorizes.
Procedure Of Use:-
In-service cleaning:- RXSOL-16-1040-020 Rx is passes through the air trunking upstream of the charge aircooler, followed by a clean water rinse.For cleaning of air coolers, it is necessary to use correctly installed dosing and injection system.
Typical Cleaning Method :-
Dilute 1-3 parts water and apply with alow pressure sprayer. Leave on coils for 3-7 minutes then flush with water until all foam is removed. If use don built up roofsetc., it is important to make sure all residual cleaner is washed off roof surface after application. If good housekeeping practices are not followed, roof deterioration is possible. If used indoors, strong fumes may cause irritation to sensitive individuals evacuate area if necessary.
For cleaning of Air cooler and Air side of turbochargers, a solution of 5 – 25% RXSOL-16-1040-020 Rx in fresh water is recommended. Inject the solution for 10-15minutes, then similar quantity of fresh water injected to rinse off emulsifieddeposits.
Handspray Cleaning:-
By Handspray,apply concentrate RXSOL-16-1040-020 Rx all over the cooler coils. for good emulsificati -on & penetration. Allow the RXSOL-16-1040-020 Rx for a minimum of 1 hour,then use a high pressu ure water to wash off the loosened deposits. During process always keep drain valve open. After satisfactory cleaning, and flushing through with fresh water, close air cooler drains. Note that during this process the engine must be stopped.
Soak method:-
Machine parts with stubborn carbon deposits to be cleaned is dipped into conc.Soln.of ACC then allow deposits to. Be broken down and loosened before removal, then rinse .
Precaution ::–
Avoid skin / eye contact. Wear gloves and goggles when using. Use in well ventilated areas. Donot breathe vapors.
PHYSICAL PROPERTIES ::–
APPEARANCE…..ClearLiquid
COLOR…..DarkBrown
ODOR…..Fresh
pH…..13.50
SPECIFICGRAVITY…..1.25
Characteristics:-
Formulated to remove oil,grease & carbon deposits from air coolers & scavenging system
Efficient and economical.
May be used for in-service cleaning.
Renders surfaces oil-repellent.
Maintains and stabilizes air cooler efficiency at maximum.
Saves time, maintenance costs and avoids risks of damage when dismantling.
Leaves no residue and has no harmful effect on engine.
Product in water solution is non-flammable, non-explosive and has no flash point.
Can be used for light carbon removal from machinery parts
**Read the Material Safety Data Sheet before using this product**
Product label
RXSOL-16-1040-020 non-acid coil cleaners developed to provide foaming and brightening capabilities comparable to acid-based coil cleaners…without the dangers of hydrofluoric acid. for cleaning of Air coolers, Scavenging air systems and turbochargers of diesel engine.