Description
RXSOL-20-2099-210 A fast-evaporating glycol ether with an excellent balance of hydrophilic and hydrophobic character; excellent active solvency and coupling properties.is a very versatile solvent product with a good balance of many different properties. With a nearly equal balance of hydrophobic and hydrophilic character, RXSOL-20-2099-210 provides excellent performance in coatings, cleaners, and many other types of products. It is one of our fastest saling Product whis is frequently use for Dobule Bottom Tank Cleaning Purpose. RXSOL-20-2099-210 is compatible with a wide range of resin types, and it also offers 100% water solubility.
Product Technical bulletin
Butyl Glycol
RXSOL-20-2099-210
Description :
RXSOL-20-2099-210 A fast-evaporating glycol ether with an excellent balance of hydrophilic and hydrophobic character; excellent active solvency and coupling properties.is a very versatile solvent product with a good balance of many different properties. With a nearly equal balance of hydrophobic and hydrophilic character, RXSOL-20-2099-210 provides excellent performance in coatings, cleaners, and many other types of products. It is one of our fastest saling Product whis is frequently use for Dobule Bottom Tank Cleaning Purpose. RXSOL-20-2099-210 is compatible with a wide range of resin types, and it also offers 100% water solubility.
Typical Physical Properties These properties are typical but do not constitute specifications. |
||
Molecular weight (g/mol) | 118.2 | |
Boiling point @ 760 mmHg, 1.01 bar | 340°F | 171°C |
Flash point | 149°F | 65°C |
Freezing point | -107°F | -77°C |
Vapor pressure@ 20°C — extrapolated |
0.66 mmHg 0.89 mbar |
|
Specific gravity (25/25°C) | 0.901 | |
Density @ 20°C @ 25°C |
7.53 lb/gal 7.49 lb/gal |
0.902 g/cm³ 0.898 g/cm³ |
Viscosity (cP or mPa•s @ 25°C) | 2.9 | |
Surface tension (dynes/cm or mN/m @ 25°C) | 27.4 | |
Specific heat (J/g/°C @ 25°C) | 2.38 | |
Heat of vaporization (J/g) at normal boiling point | 348 | |
Net heat of combustion (kJ/g) — predicted @ 25°C |
30.0 | |
Autoignition temperature | 471°F | 224°C |
Evaporation rate |
n-butyl acetate = 1.0) (diethyl ether = 1.0) |
0.079 154 |
Solubility, g/100 g @ 25°C Solvent in water Water in solvent |
||
Hansen solubility parameters (J/cm³)1/2 _d (Dispersion) _p (Polar) _h (Hydrogen bonding) |
16.0 7.6 12.3 |
|
Flammable limits (vol.% in air)Lower (measured @ 170°C) Upper (measured @ 180°C) |
1.13 10.60 |
Suggested Applications
- Active solvent for solvent-based coatings.
- Coalescent for industrial water-based coatings.
- Coupling agent for architectural water-borne coatings.
-
Coupling agent and solvent in household and industrial cleaners, rust removers, hard
surface cleaners, and disinfectants. - Primary solvent in solvent-based silk screen printing inks.
- Coupling agent for resins and dyes in water-based printing inks.
- Solvent for agricultural pesticides.
Chemical Tank Cleaning
Spraying :
The tank should be sprayed with BSOLV, and then left for 45 minutes. After 45 minutes the tank should be butterworthed warm 50-60 o C for 30 minutes, followed by a 4 hour hot wash 80 – 85 o C, after which fresh water rinse and dry the tank. All safety precautions must be taken whenever handling this product.
Re-circulation :
Sufficient Butyl Glycol should be filled into the tank so that the cargo pump and butterworth machines function properly. Circulations should be carried out for at least 4 and ideally 6 hours and all areas of the tanks must be rinsed. The tank MUST be at least cleaned to a good Water White standard and must be dry, before filling the BSOLV. If another tank is to be circulated, then the product can be directly transferred. IF not, it can be returned to drums for further use at a later date. Following the circulations, the same washing procedure is carried out as outlined above in the spraying section.
* Use a strainer at the pumpstack when circulating any solution.Tank Lining – Stainless / Zinc / Epoxy
Features :
- Powerful solvency
- Coupling ability
- Coalescing ability
- Moderate evaporation rate
- High dilution ratio
- Wide range of applications
Product label
RXSOL-20-2099-210 A fast-evaporating glycol ether with an excellent balance of hydrophilic and hydrophobic character; excellent active solvency and coupling properties.is a very versatile solvent product with a good balance of many different properties. With a nearly equal balance of hydrophobic and hydrophilic character, RXSOL-20-2099-210 provides excellent performance in coatings, cleaners, and many other types of products. It is one of our fastest saling Product whis is frequently use for Dobule Bottom Tank Cleaning Purpose. RXSOL-20-2099-210 is compatible with a wide range of resin types, and it also offers 100% water solubility.