Description
Electrosol QD Its rapid evaporation rate with super degreasing action enables it to be used for cleaning and degreasing of electrical equipment,motor winding etc. RXSOL-16-1091-025 is a well balanced blend of non – chlorinated degresol, having super digressing power with surfactants.
CLASSIFICATION : *ELECTROSOL QD (quick dry ) *ELECTROSOL NF (Non-flammable ) *ELECTROSOL PLUS APPLICATION :For cleaning of electrical parts . It must be applied concentrated . DOSE : Apply in concentrated form. PACKAGING : 25 ltrs
Product Technical bulletin
Excellent Cleaner for Electric Parts
Electrosol QD
RXSOL-16-1091-025
Introduction:-
A well balanced blend of non-chlorinated degresol ( Having super Degreasing power ) with surfactants which eliminates Quick evaporation rate and resulting for Cleaningand Degreasing of electrical equipment. It provides immediate and efficient removal with a high evaporation rate.
Procedure of Use:-
RXSOL-16-1091-025 must be used in open or sufficiently ventilated areas. RXSOL-16-1091-025 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1091-025. Never use RXSOL-16-1091-025 on a running generator or motor. RXSOL-16-1091-025 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic . Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.
Product Properties
Appearance |
Clear Colourless Liquid |
Vapor Density : Heavier than air |
Flash Point |
63°C (Closed Cup) |
Stability : Very stable understandard, . normalconditions |
Compatibility |
|
|
Metal Plastic Rubbber |
No known effect No Known effect May swell |
Note: After use the product must always be well sealed in the drum. |
Packaging |
Order No.: |
Size (in kgs./lts.) |
|
RXSOL-16-1091-025 |
7/25 Lts |
Characteristics
- High dissolving and penetration action.
- Excellent degreasing and emulsification power .
- Safe on applied electrical insulation.
- Non-corrosive .It is safe to use on painted or varnished metal surfaces.
- Without chlorinated solvents.
- To be used as an alternative to conventional electric cleaners
Clasification:-
Description |
Concentration |
Product no. |
Electrosol Plus |
95 – 98 % |
RXSOL-16-1077-020 |
Electrosol QD (Quick Dry) |
93 – 98% |
RXSOL-16-1009-025 |
ELECTROSOL – Non Flamable |
97 – 99 % |
RXSOL-16-1076-025 |
Product label
Electrosol QD Its rapid evaporation rate with super degreasing action enables it to be used for cleaning and degreasing of electrical equipment,motor winding etc. RXSOL-16-1091-025 is a well balanced blend of non – chlorinated degresol, having super digressing power with surfactants.
OTHER Grades : ELECTROSOL QD (quick dry ) ELECTROSOL NF (Non-flammable ) ELECTROSOL PLUS APPLICATION