Emulsion sludge Breaker 210 Ltr

Description

Degreaser with unique feature that dissociates slop to separate oil and water. This product is formulated to meet the ever changing regulations for the treatment of tank cleaning waste water after using petroleum based solvents, and Bunker “C” cleaners.

RXSOL-20-2006-210 is fast acting demulsifier that is formulated specially to break sludge oil and tight emulsion.
Sludge Breaker  soften and break down heavy oils, tar and asphalt sludge deposits and waxing Agent. Also can be used as  all purpose degreaser  emulsifiers, Specially designed  for engine room and cargo  tank cleaning . Main feature of RXSOL-20-2006-025 is, it finally dissociate slop emulsion  to separate oil and water.This provide us with ability to dispose of waste solution as per MARPOL & IMO rules and regulation .

Product Technical bulletin

Chem Break Rx ORG-RXSOL-20-2006-0210 ( SLUDGE BREAK )

For Engine Room & Cargo Tank Cleaner

Product Description:- RXSOL-20-2006-0210 is an all purpose degreaser emulsifiers cum sludge breaker, It is an excellent blend of powerful solvent base and inorganic products .Specially designed  for engine room and cargo  tank cleaning .Main feature of RXSOL-20-2006-0210 is, it finally dissociate slop emulsion  to separate oil and water .This provide us with ability to dispose of waste solution as per MARPOL & IMO rules and regulation .

Dosage:- Dose rate and results will vary depending on amount of contamination . For light contamination dilution with water up to 1:20 is recommended where as medium contamination dilution with Petro solvent , And for heavy contamination neat RXSOL-20-2006-0210 is suggested to use.

Procedure of use :- RXSOL-20-2006-0210 is  recommended for local cleaning & degreasing of engine rooms, bilges & tank  tops. It may be applied by brush, spray, immersion, soaking, or  any  other  conventional  means.RXSOL-20-2006-0210  is used  neat. Allow a residence time of at least 20- 45 minutes where  possible, to ensure good penetration & emulsification. Finally wash the system with hot water & high pressure.The emulsion residue after cleaning must be allowed  to separate  in a holding tank for atleast 3-5 hours before passing through an oily water separator.

Tank Cleaning after Mineral Oils/ Lube Oils / Slope-Black Oil
1 ) Fill the tank with 1-35 litres per ton wash water.Best results are obtained when water is heated to a   temperature  between  65°C & 80°C  then  stripped  constantly and transferred  to a holding  tank  for  separation.The time for this will vary depending on amount of RXSOL-20-2006-0210  used & nature of oil being cleaned.Generally,12 hours should be sufficient before the water phase can be removed.
2) Direct Cleaning.Spray directly RXSOL-20-2006-0210 on tank surfaces to be cleaned, left  for at least 30  minutes.Finally wash with hydrogating (high pressure) machine. Hot water between 50°C & 80°C recommended.

Product Properties:-

Characteristics:-

High penetration & emulsification   , Reduces down time.
Low toxicity, non -corrosive. Highly effective, economical solvent cleaner.
For cleaning of machinery parts, bulk heads, decks, bottom plates & any oil/grease dirty areas.
Used for cargo tank cleaning of mineral oils and petroleum based chemicals .
 

Product label
Degreaser with unique feature that dissociates slop to seperate oil and water. This product is formulated to meet the ever changing regulations for the treatment of tank cleaning waste water after using petroleum based solvents, and Bunker “C” cleaners.
Also can be use as all purpose degreaser emulsifiers, Specially designed for engine room and cargo tank cleaning .Main feature of RXSOL-20-2006-025 is, it finally dissociate slop emulsion to separate oil and water .