Live Chat
Description
RXSOL 1450 Ferric Sulfate 60% is an effective liquid ferric sulfate coagulant based on trivalent iron (Fe3+). The product is manufactured using a process reacting high purity iron ore with sulfuric acid. Ferric Sulfate Solution functions very well for both potable and wastewater clarification and can be used for turbidity removal, color removal, phosphate removal, heavy metal removal, in lime softening applications as well as for sludge conditioning. Ferric Sulfate Solution can also effectively be used in Hydrogen Sulfide control applications to reduce odor and corrosion.
Product Technical bulletin
Description :
RXSOL 1450 Ferric Sulfate 60% is an effective liquid ferric sulfate coagulant based on trivalent iron (Fe3+). The product is manufactured using a process reacting high purity iron ore with sulfuric acid. Ferric Sulfate Solution functions very well for both potable and wastewater clarification and can be used for turbidity removal, color removal, phosphate removal, heavy metal removal, in lime softening applications as well as for sludge conditioning. Ferric Sulfate Solution can also effectively be used in Hydrogen Sulfide control applications to reduce odor and corrosion.
Application :
Rxsol1450 is scientifically formulated for use in drinking water applications, wastewater treatment and effluent treatment.
Dose
Ferric Sulfate should be fed straight. No dilution or preparation is required. A diaphragmmetering pump of non-corrosive material is suitable.
Product Properties
Appearance: Aqueous solution
Physical state: Liquid
Form: Slightly viscous
Ferrous sulphate (% w/w): <0.8
Ferric Sulphate (% w/w): 40 to 42
Colour: Brownish / red
Odour: Odourless
pH: <1
Melting point/range: -25 – -15 °C
Boiling point/boiling range: 103 – 108 °C
Density: 1.57 – 1.63 g/cm3 (15 °C)
Solubility (water): Soluble
Suspended solids (ppm): <340
Properties
| Form | Liquid |
| Colour | Colourless to slightly Yellow |
| Odour | Acrid, slight odour of Sulphur dioxide |
| Boiling point and boiling range | No Data Available |
| Flash Point | >100°C |
| Freezing Point | No Data Available |
| pH | 6 |
| Evaporation rate | No data available |
| Flammability (solid, gas) | No data available |
| Upper explosion limit | No data available |
| Lower explosion limit | No data available |
| Explosive properties | No data available |
| Vapor pressure | No data available |
| Relative vapor density | No data available |
| Relative density | 1.05-1.11 g/cm3 (25C) |
| Water solubility | Soluble |
| Solubility in other solvents | No data available |
| Partition coefficient: octanol | No data available |
| Autoignition temperature | No data available |
| Thermal decomposition | No data available |
| Viscosity, kinematic | No data available |
| Explosive properties | No data available |
| Oxidizing properties | No data available |
| Molecular weight | No data available |
| VOC | No data available |
Product Benefits
- High performance primary coagulant
- Excellent for drinking water, wastewater treatment and effluent treatment applications
- Effective over a wider pH range
- Available in convenient liquid
- Chloride free
- Cost effective coagulant
- Excellent for the treatment of wastewater where low pH is required – removal of fats, oil and grease, high colour
Handling :
The handling of any chemical requires care. Anyone responsible for using or handling Ferric Sulfate should familiarize themselves with the full safety precautions outlined in our Material Safety Data Sheet.
Storage
Storage tanks and piping should be constructed of suitable material such as stainless steel, fiberglass, or cross-linked polyethylene. With this chemical it is recommended to clean the storage tank every 1-2 years.
Product label