Muriatic Acid 60 Kg

Clean ship hold and Brighten Surface and also easily cleans mineral, salts deposits as well as algae and scum.

Muriatic Acid supplier and exporter in India and Middle East. Muriatic Acid clean ship hold and Brighten Surface and also easily cleans mineral, salts deposits as well as algae and scum.

Application

Muriatic Acid comes in liquid form, While we have Muriatic acid in Gel - Viscous form which is resulting with the excess blend of surfactant and a thickening agent, which is not only increasing importance to use on the vertical surface where liquid use is not possible but also increasing cleaning action without smoke generation.

Dose
Before uses of Muriatic acid chemical washing, Removal of more excess residues during dry cleaning either manual sweeping or air blown is always been wise decision. After dry cleaning, the holds are to be chemically washed with Muriatic Acid/Hydrochloric Acid and leave the surface for 15-30 minutes to allow maximum efficiency but not to dry out. Finally washed with Sea Water and rinsed with Fresh Water (depending on the next cargo).
 
Technical specifications

PRODUCT SPECIFICATION SHEET

Muriatic Acid

Parameters

Specification Range

Typical

% Strength

34.5 – 35.5

35.0

Specific gravity @ 60°F

1.175 – 1.182

1.18

Degree Baumē (Bē)

21.8 – 22.2

22.0

Iron (ppm)

0.5 – 1.5

< 0.5

Color (APHA)

N/A - 20

< 20

Total organic compound (ppm)

N/A – 5

< 5

Lead (Pb) (ppm)

N/A - 1

<1

Oxidizing substance (as cl2 ppm)

N/A – 30

< 30

Reducing Substances (as SO3)

N/A - 70

<70

Non-Volatile Residue (wt.%)

N/A - 0.5

<0.5

Sulfate (SO4) (%)

N/A - 0.5

<0.5

Note

We are selling companies of Muriatic Acid, Share your purchase requirements and latest info on Muriatic Acid. We are suppliers, manufacturers, wholesalers, traders of Muriatic Acid. Get factory sale discounted prices of Muriatic acid through mail.

Remarks / Precaution

Before you remove stains and uses of Muriatic make sure to thoroughly protect yourself. personnel involved must wear full “Personal Protective Equipment”. using a designated cleaning kit.

Packing sizes
5, 10, 20, 30, 60, 250 Kg fully new acid resistance drums. Available stock at Chennai, Ennore, Tuticorin, Visakhapatnam - Gangavaram, Kakinada, Paradip, Haldia, Kolkata, Mumbai, Nhava Seva, Surat - Hazira, Kandla, Mundra, Gandhidham - India. Fujairah - Dubai - Middle East, UAE.
MSDS

Product Name RXSOL-22-2205-025
Product Type Muriatic Acid

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333 / 5555 / 9999
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

Ingredient

CAS No

Percent

Muriatic Acid

7647-01-0

30 – 36

The balances of chemical ingredients are not identified as hazardous under OSHA's Hazard Communication Rule
29 CFR 1910.1200.

---------------

64-70

 

NFPA RATINGS (SCALE 0-4)  
  HEALTH = 3
  FIRE = 0
  REACTIVITY = 0
HMIS RATINGS (SCALE 0-4)  
   HEALTH = 3
   FLAMMABILITY = 0
  REACTIVITY = 0

 

EMERGENCY OVERVIEW  
 COLOR colorless
 PHYSICAL FORM liquid
 ODOR  pungent odor
SIGNAL WORD  DANGER
 MAJOR HEALTH HAZARDS   CAUSES BURNS TO THE RESPIRATORY TRACT, SKIN, EYES AND
 GASTROINTESTINAL TRACT  CAUSES PERMANENT EYE DAMAGE.   MAY BE HARMFUL OR FATAL IF
SWALLOWED.
 PHYSICAL HAZARDS May spatter or generate heat when mixed with water.   Contact with metals may evolve
flammable hydrogen gas.
PRECAUTIONARY STATEMENTS  Do not breathe vapor or mist.  Do not get in eyes, on skin, or on clothing.
Do not taste or swallow.  Wash thoroughly after handling.  Use only with adequate ventilation. 

 

SHORT TERM EXPOSURE

 burns, eye damage, blindness

LONG TERM EXPOSURE

 to our knowledge, no effects are known

INGESTION

 

SHORT TERM EXPOSURE

burns

LONG TERM EXPOSURE

ingestion of harmful amounts is unlikely

CARCINOGEN STATUS

 

OSHA

no

NTP

no

IARC

no

 

Inhalation

If adverse effects occur, remove to uncontaminated area. Give artificial respiration if not breathing. If breathing is difficult, oxygen should be administered by qualified personnel. If respiration or pulse has stopped, have a trained person administer Basic Life Support (Cardio-Pulmonary Resuscitation/Automatic External Defibrillator) and CALL FOR EMERGENCY SERVICES IMMEDIATELY.

Skin Contact

Immediately flush contaminated areas with water. Remove contaminated clothing, jewelry, and shoes immediately. Wash contaminated areas with soap and water. Thoroughly clean and dry contaminated clothing and shoes before reuse. Discard footwear which cannot be decontaminated. GET MEDICAL ATTENTION IMMEDIATELY.

EYE CONTACT

Immediately flush eyes with a directed stream of water for at least 15 minutes, forcibly holding eyelids apart to ensure complete irrigation of all eye and lid tissues. Washing eyes within several seconds is essential to achieve maximum effectiveness. GET MEDICAL ATTENTION IMMEDIATELY.

INGESTION

Never give anything by mouth to an unconscious or convulsive person. If swallowed, do not induce vomiting. Give large amounts of water. If vomiting occurs spontaneously, keep airway clear. Give more water when vomiting stops. GET MEDICAL ATTENTION IMMEDIATELY.

NOTE TO PHYSICIAN

The absence of visible signs or symptoms of burns does NOT reliably exclude the presence of actual tissue damage. Probable mucosal damage may contraindicate the use of gastric lavage.

FIRE AND EXPLOSION HAZARDS

May release toxic gases.

EXTINGUISHING MEDIA 

Use extinguishing agents appropriate for surrounding fire.

FIRE FIGHTING

 

Keep unnecessary people away, isolate hazard area and deny entry. Wear NIOSH approved positive-pressure self-contained breathing apparatus. Move containers from fire area if it can be done without risk. Avoid inhalation of material or combustion by-products. Stay upwind and keep out of low areas. Cool containers with water.

SENSITIVITY TO MECHANICAL IMPACT

Not sensitive

FLASH POINT

not flammable

HAZARDOUS COMBUSTION PRODUCTS

Thermal decomposition products or combustion: hydrogen chloride

OCCUPATIONAL RELEASE: Evacuation of surrounding area may be necessary for large spills. Wear appropriate personal protective equipment recommended in Section 8 of the MSDS. Completely contain spilled material with dikes, sandbags, etc. Shut off ventilation system if needed. Reprocess or reuse if possible. Neutralize with soda ash or dilute caustic soda. Collect with appropriate absorbent and place into suitable container. Liquid material may be removed with a vacuum truck. Keep out of water supplies and sewers. This material is acidic and may lower the pH of the surface waters with low buffering capacity. Releases should be reported, if required, to appropriate agencies. Notify Local Emergency Planning Committee and State Emergency Response Commission for release greater than or equal to RQ (U.S. SARA Section 304). If release occurs in the U.S. and is reportable under CERCLA Section 103, notify the National Response Center at (800) 424-8802 (USA) or (202) 426-2675 (USA).

 

STORAGE

Store and handle in accordance with all current regulations and standards. Store in rubber-lined steel, acid-resistant plastic or glass containers. Keep containers tightly closed and properly labeled. Store in a cool, dry place. Store in a well-ventilated area. Do not store in aluminum container or use aluminum fittings or transfer lines. Dike and vent storage tanks. Keep separated from incompatible substances (see Section 10 of the MSDS).

HANDLING

Avoid breathing vapor or mist. Do not get in eyes, on skin, or on clothing. Wash thoroughly after handling. When mixing, slowly add to water to minimize heat generation and spattering.

EXPOSURE LIMITS

Muriatic Acid, ANHYDROUS

HYDROGEN CHLORIDE (HYROCHLORIC ACID)

5 ppm (7 mg/m3) OSHA ceiling, 2 ppm ACGIH ceiling

VENTILATION

Use closed systems when possible. Provide local exhaust ventilation where vapor or mist may be generated. Ensure compliance with applicable exposure limits.

EYE PROTECTION

Wear safety glasses with side shields. Wear chemical safety goggles with a faceshield or chemical splash hood. Provide an emergency eye wash fountain and quick drench shower in the immediate work area.

CLOTHING

Wear chemical resistant clothing and rubber boots when potential for contact with the material exists. Always place plants legs over boots.

GLOVES

Wear appropriate chemical resistant gloves.

PROTECTIVE MATERIAL TYPES

neoprene, nitrile, polyvinyl chloride (PVC), rubber, Kappler ® CPF3, Tychem

IMMEDIATELY DANGEROUS TO LIFE OR HEALTH

50 ppm

RESPIRATOR

Where vapor concentration exceeds or is likely to exceed applicable exposure limits, a NIOSH approved respirator with acid gas canister is required. When an air-purifying respirator is not adequate for spills and/or emergencies of unknown concentrations, a NIOSH approved self-contained breathing apparatus or airline respirator with full-face piece is required. A respiratory protection program that meets 29 CFR 1910.134 must be followed whenever workplace conditions warrant use of a respirator.

PHYSICAL STATE

liquid

Appearance

Clear.

COLOR

colorless

Odor

pungent odor

MOLECULAR WEIGHT

36.46

MOLECULAR FORMULA

HCl

BOILING POINT

140-221F (60.0 – 105 C)

FREEZING POINT

-29 to 5 F (-34 to –15 C)

VAPOR PRESSURE

14.6 – 80 mmHg @ 20 C

VAPOR DENSITY (air = 1)

1.3 @ 20 C

SPECIFIC GRAVITY (water = 1)

1.05 – 1.18

BULK DENSITY

8.75 – 9.83 lbs/gal

WATER SOLUBILITY

100%

PH

2 (0.2% solution)

VOLATILITY

9 – 36% by volume

ODOR THRESHOLD

0.3 ppm (causes olfactory fatigue)

EVAPORATION RATE

1.00 (butyl acetate = 1)

COEFFICIENT OF WATER/OIL DISTRIBUTION

n/a

REACTIVITY

Stable at normal temperatures and pressure.

CONDITIONS TO AVOID

Avoid heat, flames, sparks and other sources of ignition. Contact with water may produce a strong exothermic reaction with spattering. Contact with metals may evolve flammable hydrogen gas. Hydrogen chloride may react with cyanide, forming lethal concentrations of hydrocyanic acid.

INCOMPATIBILITIES

metals, alkalis (such as sodium hydroxide), mercuric sulfate, perchloric acid, carbides of calcium, cesium, rubidium, acetylides of cesium and rubidium, phosphides of calcium and uranium, lithium silicide.

HAZARDOUS DECOMPOSITION

Thermal decomposition products or combustion: hydrogen chloride

POLYMERIZATION

will not polymerize

 

MURIATIC ACID (ALL GRADES)

 

TOXICITY DATA

Muriatic Acid: 900 mg/kg oral-rabbit LD50; 1108 ppm/1 hour(s) inhalation-rat; 3124 ppm/1 hour(s) inhalation-rat LC50. Rinsed Draize Test: 5 mg/30 second(s) rabbit-eye mild. Standard Draize Test: 4% / 24 hour(s) skin-human mild. Inhalation will cause severe irritation and possible burns with coughing and choking. If inhaled deeply, edema and hemorrhage of the lungs may occur. Levels of 10-35 ppm may cause irritation of throat and 50-100 ppm is unbearable for 1 hour. Inflammation, destruction of nasal passages and breathing difficulties may occur with higher concentration and/or erosion of teeth. Contact with eyes causes immediate severe irritation with possible burns, permanent visual impairment, or total loss of sight. Contact with fumes or liquid may produce corrosive burns. Dermal exposure also results in irritation, pain, dermatitis, and ulceration. Ingestion may cause immediate burns of the mouth, esophagus, and stomach. Ingestion may cause intense pain, nausea, vomiting, bleeding, circulating collapse, shock and death.

MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE

RE: respiratory system (including asthma and other breathing disorders)

 

ECOTOXICITY DATA

 

FISH TOXICITY

Muriatic Acid: 178 mg/L LC50 Goldfish (1 to 2 hour survival time); 100-300 mg/L LC50 Shrimp. 3.6 mg/L 48 hour(s) (static) LC50 Bluegill. This material is believed to be toxic to aquatic life.

FATE  AND TRANSPORT

 

BIODEGRADATION

This material is inorganic and not subject to biodegradation.

PERSISTENCE

This material is believed not to persist in the environment. This material is believed to exist in the disassociated state in the environment. SOIL: Hydrogen chloride will sink into the soil. The acid will dissolve some soil material (in particular, anything with a carbonate base) and will be somewhat neutralized. The remaining portion is thought to transport downward to the water table. WATER: Dissociates almost completely and will be neutralized by natural alkalinity and carbon dioxide.

BIOCONCENTRATION

This material is believed not to bioaccumulate.

Reuse or reprocess if possible. Dispose in accordance with all applicable regulations.

Subject to disposal regulations

regulations: U.S. EPA 40 CFR 262.

Hazardous Waste Number(s)

D002.

 U.S. DOT 49 CFR 172.101  
PROPER SHIPPING NAME

Muriatic Acid solution

 ID NUMBER

UN1789

 HAZARD CLASS OR DIVISION

8

 PACKING GROUP

II

LABELING REQUIREMENTS

8

DOT HAZARDOUS SUBSTANCE(S)

Muriatic Acid 5000 lb(s) (2270 kg(s)

 CANADIAN TRANSPORTATION OF DANGEROUS GOODS  
 SHIPPING NAME

Muriatic Acid solution

 UN NUMBER

UN1789

CLASS

8

 PACKING GROUP/RISK GROUP  II

 

U.S. REGULATIONS

 

CERCLA SECTIONS 102a/103 HAZARDOUS SUBSTANCES (40 CFR 302.4)

 

Muriatic Acid HYDROGEN CHLORIDE 

5000 LBS RQ (liquid)

CHLORINE

10 LBS RQ

SARA TITLE III SECTION 302 EXTREMELY HAZARDOUS SUBSTANCES (40 CFR 355.30)

 

Muriatic Acid HYDROGEN CHLORIDE

500 LBS TPQ (gas)

SARA TITLE III SARA SECTIONS 311/312 HAZARDOUS CATEGORIES (40 CFR 370.21)

 

ACUTE 

yes

CHRONIC

no

FIRE

no

REACTIVE

no

SUDDEN RELEASE

no

SARA TITLE III SECTION 313 (40 CFR 372.65)

 

Muriatic Acid HYDROGEN CHLORIDE

aerosol form only

This product contains a toxic chemical or chemicals subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR 372. Refer to Section 3.

OSHA PROCESS SAFETY (29 CFR 1910.119)

Muriatic Acid HYDROGEN CHLORIDE: 5000 LBS TO (gas)

CHLORINE

1500 LBS TQ

FDA

This material has Generally Recognized as Safe (GRAS) status under specific FDA regulations. Additional information is available from the Code of Federal Regulations (CFR) which is accessible on the FDA’s website.

STATE REGULATIONS

 

California Proposition 65

This product may contain contaminants known to the State of California to cause cancer or reproductive toxicity as listed under Proposition 65 State Drinking Water and Toxic Enforcement Act.

NEW JERSEY WORKER AND COMMUNITY RIGHT TO KNOW

 

 REPORTING REQUIREMENT

 

WATER

  7732-18-5 63 – 91%

HYDROGEN CHLORIDE 7647-01-0 

936% 

RIGHT TO KNOW HAZARDOUS SUBSTANCE LIST

Muriatic Acid HYDROGEN CHLORIDE 7647-01-0 9-36% CHLORINE 7782-50-5 0 – 50 ppm

SPECIAL HEALTH HAZARD SUBSTANCE LIST

Muriatic Acid HYDROGEN CHLORIDE 7647-01-0 9-36%

PENNSYLVANIA RIGHT TO KNOW

 

REPORTING REQUIREMENT

WATER 7732-18-5 63 – 91% 

Muriatic Acid HYDROGEN CHLORIDE 7647-01-0 0 36%

HAZARDOUS SUBSTANCE LIST

Muriatic Acid HYDROGEN CHLORIDE 7647-01-0 9-36%

ENVIRONMENTAL HAZARDOUS SUBSTANCE LIST

Muriatic Acid HYDROGEN CHLORIDE 7647-01-0 9-36%

SPECIAL HAZARDOUS SUBSTANCE LIST

not regulated

CANADIAN REGULATIONS

WHMIS CLASSIFICATION: E

NATIONAL INVENTORY STATUS

 

U.S. INVENTORY (TSCA)

All the components of this substance are listed on or are exempt from the inventory.

TSCA 12(b) EXPORT NOTIFICATION

not listed

CANADA INVENTORY (DSL/NDSL)

All components of this product are listed on the DSL.

IMPORTANT: The information presented herein, while not guaranteed, was prepared by competent technical personnel and is true and accurate to the best of our knowledge. NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, OR WARRANTY OR GAURANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, IS MADE REGARDING PERFORMANCE, SUITABILITY, STABILITY OR OTHERWISE. The information included herein is not intended to be all-inclusive as to the appropriate manner and/or conditions of use, handling and/or storage. Factors pertaining to certain conditions of storage, handling, or use of this product may involve other or additional safety or performance considerations. While our technical personnel will be happy to respond to questions regarding safe handling and use procedures, safe handling and use remains the responsibility of the customer. No suggestions for use are intended to, and nothing herein shall be construed as a recommendation t, infringe any existing patents or violate any laws, rules, regulations or ordinances of any governmental entity.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@mumbaichemical.com