PHPA is a co polymer of anionic character and high molecular weight It is a water soluble polymer which is primarily used as a highly efficient fluid loss reducer Viscosifier and protective colloid for shale s and cutting in fresh water calcium sodium brines and KCL mud systems
| Product Name | Partial Hydrolyzed Polyacrylamide PHPA |
| Part Number | RXSOL-40-1534-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| mail@rxmarine.com | |
| Website | www.rxmraine.com |
Substances
| Synonyms | PAM |
| Formula | (C3H5NO)n |
| CAS-No. | 9003-05-8 |
No components need to be disclosed according to the applicable regulations.
| Classification of the substance or mixture | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
| Label elements | Not a hazardous substance or mixture. |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| If inhaled | If breathed in, move person into fresh air. If not breathing, give artificial respiration. |
| In case of skin contact | Wash off with soap and plenty of water. |
| In case of eye contact | Flush eyes with water as a precaution. |
| If swallowed | Never give anything by mouth to an unconscious person. Rinse mouth with water. |
| Most important symptoms and effects, both acute and delayed | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Suitable extinguishing media | Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. |
| Special hazards arising from the substance or mixture |
Carbon oxides
Nitrogen oxides (NOx)
|
| Advice for firefighters | Wear self-contained breathing apparatus for firefighting if necessary. |
| Further information | No data available |
| Personal precautions, protective equipment and emergency procedures |
Avoid dust formation. Avoid breathing vapors, mist or gas.
For personal protection see section 8.
|
| Environmental precautions | No special environmental precautions required. |
| Methods and material for containment and cleaning up | Sweep up and shovel. Keep in suitable, closed containers for disposal. |
| Reference to other sections | For disposal see section 13. |
Precautions for safe handling
| Advice on protection against fire and explosion | Provide appropriate exhaust ventilation at places where dust is formed. |
| Hygiene measures |
General industrial hygiene practice.
For precautions see section 2.2.
|
| Conditions for safe storage, including any incompatibilities | |
| Storage conditions |
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Hygroscopic.
|
| Storage class | Storage class (TRGS 510): 13: Non Combustible Solids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
Personal protective equipment
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). |
| Skin protection |
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN 16523-1 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Full contact
Material: butyl-rubber
Minimum layer thickness: 0,7 mm
Break through time: 480 min
Material tested:Butoject® (KCL 898)
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN 16523-1 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Splash contact
Material: Viton®
Minimum layer thickness: 0,7 mm
Break through time: 60 min
Material tested: Vitoject® (KCL 890 / Aldrich Z677698, Size M)
|
| Body Protection | Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. |
| Respiratory protection | Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). |
| Control of environmental exposure | No special environmental precautions required. |
| Physical state | Solid |
| Color | No data available |
| Odor | No data available |
| Melting point/freezing point | Melting point/range: 246 - 250 °C |
| Initial boiling point and boiling range | No data available |
| Flammability (solid, gas) | May form combustible dust concentrations in air |
| Upper/lower flammability or explosive limits | No data available |
| Flash point | Not applicable |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| pH | No data available |
| Viscosity | No data available |
| Water solubility | No data available |
| Partition coefficient: n-octanol/water | No data available |
| Vapor pressure | No data available |
| Density | 0,750 g/cm3 |
| Relative density | No data available |
| Relative vapor density | No data available |
| Particle characteristics | No data available |
| Explosive properties | No data available |
| Oxidizing properties | No data available |
| Other safety information | No data available |
| Reactivity |
No data available
|
| Chemical stability | Stable under recommended storage conditions. |
| Possibility of hazardous reactions | No data available |
| Conditions to avoid | No data available |
| Incompatible materials | Strong oxidizing agents |
| Hazardous decomposition products | In the event of fire: see section 5 |
| Acute toxicity |
LD50 Oral - Rat - > 1.000 mg/kg
Inhalation: No data available
Dermal: No data available
|
| Skin corrosion/irritation | No data available |
| Serious eye damage/eye irritation | No data available |
| Respiratory or skin sensitization | No data available |
| Germ cell mutagenicity | No data available |
| Carcinogenicity | No data available |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure | No data available |
| Specific target organ toxicity - repeated exposure | No data available |
| Aspiration hazard | No data available |
| Additional Information | To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. |
| Toxicity | No data available |
| Persistence and degradability | No data available |
| Bioaccumulative potential | No data available |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties | No data available |
| Other adverse effects | No data available |
| Waste Disposal Methods | |
| Product | Offer surplus and non-recyclable solutions to a licensed disposal company. |
| Contaminated packaging | Dispose of as unused product. |
| UN number | ADR/RID: IMDG: IATA: |
| UN proper shipping name |
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
|
| Transport hazard class(es) | ADR/RID: IMDG: IATA: |
| Packaging group | ADR/RID: IMDG: IATA: |
| Environmental hazards | ADR/RID: yes IMDG Marine pollutant: yes IATA: no |
| Special precautions for user | |
| Further information | Not classified as dangerous in the meaning of transport regulations. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |