RO Chlorine Neutralizer

RO Chlorine Neutralizer SMBS 97 RO dechlorination chemical chemical purpose is to remove residual chlorine before the feedwater enters chlorine-sensitive reverse osmosis membranes.
Category

RXSOL RO Dechlorination Chemical – Rapid Chlorine Neutralizer for Reverse Osmosis Membranes

Product Name: RXSOL RO Dechlorination Chemical
Brand: RXSOL – RX Marine International
Product Category: RO Membrane Protection / Water Treatment Chemicals
Chemical Type: Liquid Reducing Agent / Dechlorination Treatment
RXSOL Product Code: RXSOL-33-9735-025

Product Description

RXSOL RO Dechlorination Chemical is a liquid chemical treatment designed for the removal of residual free chlorine from reverse osmosis (RO) feedwater before the water enters the membrane elements.

Residual chlorine is a major concern in RO systems equipped with chlorine-sensitive polyamide membranes. Even low concentrations of oxidizing chlorine can damage the membrane's selective layer, resulting in increased salt passage and deterioration of membrane performance.

RXSOL RO Dechlorination Chemical is intended to neutralize residual chlorine through a controlled chemical reduction process, helping protect RO membranes and maintain reliable desalination performance.

The proposed product can be developed using sodium bisulfite-based chemistry, with a suitably validated catalyst system where rapid dechlorination is required.

Application

Major Applications

1. Reverse Osmosis Membrane Protection

Used to neutralize residual chlorine before water enters polyamide RO membrane systems.

2. Industrial RO Plants

Suitable for chemical pretreatment systems in industrial water purification plants.

3. Seawater Desalination Plants

Can be used in suitable seawater RO pretreatment systems where chlorine is applied upstream and must be removed before membrane contact.

4. Brackish Water RO Systems

Used for dechlorination of municipal, groundwater or surface-water feeds that have undergone chlorination.

5. Boiler Feedwater RO Systems

Helps protect RO membranes used to prepare high-quality water for boiler feedwater treatment.

6. Pharmaceutical and Process Water Systems

Can be evaluated for appropriately controlled industrial and high-purity water treatment systems, subject to application-specific chemical quality requirements.

Dose

Recommended Dosage

The RXSOL-33-9735-025 RXSOL RO Dechlorination Chemical reference document indicates approximately 9 ppm of product for removal of 1 ppm of residual chlorine.

This figure may be used as a reference benchmark for RXSOL product development. The final RXSOL dosage must be determined from the actual active concentration and dechlorination performance.

Residual Chlorine in RO Feedwater Reference Product Dosage
0.2 ppm 1.8 ppm
0.5 ppm 4.5 ppm
1.0 ppm 9.0 ppm
1.5 ppm 13.5 ppm
2.0 ppm 18.0 ppm

The above values are proportional calculations based on the GENERAL APPLICATION.

Application Procedure

  1. Measure residual free chlorine in RO feedwater.

  2. Determine the required dechlorination chemical dosage based on active content and water conditions.

  3. Install a suitable chemical metering pump and injection arrangement.

  4. Inject the chemical into the RO feedwater line at a location that provides sufficient mixing and reaction time.

  5. Monitor residual chlorine downstream of chemical injection.

  6. Confirm chlorine removal before water enters chlorine-sensitive RO membranes.

  7. Adjust the dosage according to feedwater chlorine variation and operating conditions.

Technical specifications

Technical Specifications

Parameter Proposed Description
Appearance Clear liquid
Chemical Nature Reducing agent
Active Chemistry Sodium bisulfite-based
Water Solubility Water-miscible
Application Residual chlorine removal
Dosage Method Continuous metering
Recommended Injection RO feedwater pretreatment line
Density To be established
pH To be established
Shelf Life Subject to stability testing
Packaging Proposed 20 kg, 30 kg and 220 kg

These are development specifications.

Note

Working Principle

Sodium bisulfite reacts with free chlorine, converting it into chloride while oxidizing sulfite to sulfate.

A simplified reaction is:

NaHSO₃ + HOCl → NaHSO₄ + HCl

This reaction reduces the oxidizing potential of the treated water.

The actual dechlorination rate depends on pH, temperature, chlorine concentration, mixing efficiency and chemical dosage.

Remarks / Precaution

Key Features and Benefits

  • Rapid removal of residual free chlorine from RO feedwater

  • Helps protect chlorine-sensitive RO membranes

  • Suitable for continuous chemical dosing

  • Liquid formulation for convenient handling and metering

  • Water-miscible treatment chemistry

  • Suitable for industrial and commercial RO systems

  • Can be evaluated for cold-water dechlorination

  • Helps reduce the risk of oxidative membrane damage

  • Suitable for automatic dosing systems with chlorine monitoring

Packing sizes
RO dechlorination chemical purpose is to remove residual chlorine before the feedwater enters chlorine-sensitive reverse osmosis membranes. Available in 20, 30, 50, 220 Kg Liquid PACK

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote WhatsApp +91 87529 36666 mumbaichems @ gmail.com