RXSOL-28-1050-005 is Exciting product treated for prevention of rusting by chemical coating. This product is Single component rust neutralizing system giving excellent adhesion to subsequent painting materials. on applying to metal surface it penetrates through and chemically reacts with the rust on the surfaces and forms a fine coherent film of protective coating on the surface which also serves as an excellent base for the primer.
When a piece of iron is left exposed to ordinary moist air, it is found covered with reddish brown coating which can easily be detached, The process of formation of dust is called rusting. RXSOL-28-1011-005 is Exciting product treated for prevention of rusting by chemical coating.
Rust Converter manufacturers, suppliers & exporters in India and Middle East. We have various location of stock point for supplying of Rust Converter. Rust converter coating that is applied to rusted metal to stop rust, protect the metal surface.
APPLICATION, DOSAGE & CONTROL:-
It is necessary chemically cleaned to remove old rust & scale deposits before treatment.
DIP CLEANING: -
Small parts may be dipped in an open bucket or tank-containing RXSOL-28-1011-005 after dipping immediately removes the metals parts from bath. Finally wash the system with water on complete drying. Acid proof gloves should be worn during the operation.
Rust convertor RXSOL-28-1011-005 is polymeric reaction based material, After reaction with rusted particle gives inert atmosphere by leaving polymeric pricipitate on metal surface.
| Appearance | Clear Colourless Liquid | |
| Density | g/cm3 at 20°C 1.05 | |
| Solubility | Water soluble | |
| Drying Time | 1-2 HOURS | |
| Coverage | 18-25 Sq. M/ Lts | |
| Packaging | Order No.: RXSOL-28-1011-005 |
Size (in Ltrs) 25 Ltrs |
WIPPING OR BRUSHING: -
Large components may be wiped down Rags, Sponges, or Brushes soaked in RXSOL-28-1011-005 .Synthetic sponges & brushes should be checked for compatibility with RXSOL-28-1011-005 prior to use. And finally wash the system with water after 2-3 hours on black coating , incase where RXSOL-RC-1011/B dries leaving a coat of white sludge formation wipe out with a cloth and repeat the application then allow to dry. Again wash the system with water. The surface is now ready for primer.
- Not expected to burn
- Sandblasting not require
- Excellent bonding
- Extends durability and life of the paints
- Easy to apply & simple to control.
- Dries completely.
- 100% active.
- Formulated to be very cost effective.
- Maintains a protective insoluble tenacious film of iron phosphate.
- Can be used neat or diluted with fresh water.
Where useful metals react with environments and are lost usually as oxides. Materials worth billions of rupees are wasted due to corrosion of material every year. It is therefore essential for every one to understand the undergoing principles in order to check corrosion
Personal- Protection:
| Occupational Exposure Limits | This product does not contain any ingredients,which has an established exposure limit. |
| Respiratory Protection | Not normally needed |
| Hand Protection | PVC Acid proof gloves. |
| Eye Protection | Chemicals splash goggles. |
| General Remarks | |
| Materials to Avoids | Acids, Alkalis, Organic materials, Reducing agents & Strong Oxidizing agents |
**Read the Material Safety Data Sheet before using this product**
| Product Name | RXSOL-28-1011-005 |
| Product Type | Rust Convertor |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumabai, Kandla, Kolkata, Chennai, Vizag, Fujairah, Muscat
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
| Chemical Name | CAS No. | Approx. wt. Percentage | Exposure |
| Vinyl Copolymer | N/E | 5-6 |
ACGIH-TLV -N/E OSHA-PEL - N/E |
| Tannic Acid | 1401-55-4 | 1-2 |
ACGIH-TLV - N/E OSHA-PEL - N/E |
| Orthophosphoric Acid | 7664-38-2 | 45 | Skin Corr. 1B, H314 |
| *2-Butoxyethanol | 111-76-2 | 1.7 | ACGIH-TLV - 50 ppm (Skin) OSHA-PEL - 20 ppm |
| Ethylene Glycol | 107-21-1 | 10 - 25 | _______________ |
| Mineral Oil MIXTURE | ------- | 60 - 80 |
| RCRA REGULATED | No |
| CERCLA (superfund) | N/A |
| ALL MATERIALS IN PRODUCT ARE TSCA LISTED. | |
| DOT Regulated | No |
| DOT Haz. Class | N/A |
| DOT Shipping Name | N/A |
| DOT Number | N/A |
|
SUMMARY OF ACUTE HAZARDS |
Irritation to eyes, nose, and throat; drowsiness, narcosis, tremors, and other CNS effects at high concentrations. Skin irritation, dermatitis, and defatting. |
| ROUTE OF EXPOSURE, SIGNS AND SYMPTOMS | |
|
INHALATION |
Nasal and respiratory irritation, dizziness, narcosis, headache, nausea, CNS depression, and unconsciousness. |
|
EYE CONTACT |
Watering, blurred vision, inflammation, and irritation which can result in |
|
SKIN CONTACT |
Irritation, dermatitis. |
| INGESTION |
Nausea, vomiting; CNS depression; irritation of gastrointestinal tract, liver and peritoneal wall; lung congestion. |
| SUMMARY OF CHRONIC HAZARDS | Skin irritation, contact dermatitis, and defatting. |
| MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE |
Individuals with pre-existing or chronic diseases of the eyes, skin, respiratory system, cardiovascular system, gastrointestinal system, liver, or kidneys may have increased susceptibility to excessive exposure. |
|
If INHALED |
If overcome by exposure, remove victim to fresh air immediately. Give oxygen or artificial respiration as needed. Obtain emergency medical attention. Prompt action is essential. |
|
If on SKIN |
Immediately wash with soap and water. Remove and wash any contaminated clothing. |
|
If in EYES |
Flush eyes with large amounts of water for 15 minutes. Get medical attention if irritation persists. |
|
If SWALLOWED |
If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person. |
Section IV: Fire and Explosion Hazard Data
| Flash Point (Method) Bulk Liquid (TCC) | None |
| Flammable Limits | N/A |
| Extinguishing Media | N/A |
| Special Fire Fighting Procedures | N/A |
| Unusual Fire & Explosion Hazards | N/A |
|
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED |
Remove all sources of ignition. Use absorbent materials to prevent footing hazard and to contain. Ventilate area with natural or explosion-proof, forced air ventilation. Avoid flushing into sewers, drains, waterways, and soil. Wear protective clothing |
|
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING |
Shake well before using. Keep away from heat, sparks and open flames. |
| OTHER PRECAUTIONS | Avoid prolonged or repeated contact with skin or clothing. Empty containers may contain residues; treat as if full and observe all products precautions. Do not reuse empty containers. |
|
RESPIRATORY PROTECTION (SPECIFY TYPE) |
In confined, poorly ventilated areas, use NIOSH/MSHA approved air purifying or supplied air respirators during soldering operations until fumes have dissipated. |
| VENTILATION - LOCAL EXHAUST | Acceptable |
| OTHER | N/A |
| PROTECTIVE GLOVES | Wear rubber gloves. |
| EYE PROTECTION | Safety glasses (ANSI Z-87.1 or equivalent) |
| OTHER PROTECTIVE CLOTHING OR EQUIPMENT | Chemical resistant coveralls |
| WORK/HYGIENIC PRACTICES | Where use can result in skin contact, wash exposed areas thoroughly before eating, drinking, smoking, or leaving work area. Launder contaminated clothing before reuse. |
Section III: Physical Data
| Appearance & Odor | CLEAR liquid with a very slight "vinyl" odour. |
| Boiling Point | 218° F |
| Evaporation Rate (Water=1) | 1 |
| pH | 2 |
| Solubility In Water | Dispersible |
| Specific Gravity | 1.01 |
| Vapor Density (AIR=1) | N/A |
| Vapor Pressure | Approx. 17 mm Hg |
| VOC Content | 22 grams/liter |
|
Flash Point (Method) |
Bulk Liquid (TCC) None |
|
CONDITIONS TO AVOID |
None |
|
INCOMPATIBILITY (MATERIALS TO AVOID) |
Oxidizers, acids and bases. |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
CO, CO, and fragmented hydrocarbons. |
|
HAZARDOUS POLYMERIZATION |
Will not occur |
| CHRONIC HEALTH HAZARDS |
No ingredient in this product is an IARC, NTP or OSHA listed carcinogen. |
|
Ingredient Name |
Oral-Rat LD50 |
Inhalation-Rat LC50 |
|
lauryl dimethyl amine oxide |
4.3 mg/kg | N/D |
|
Polylene Glycol Butyl Ether |
N/D |
N/D |
|
Sodium Metasilicate |
1153 mg/kg |
N/D |
|
Ingredient Name |
Food Chain Concentration Potential |
WATERFOWL TOXICITY | BOD | AQUATIC TOXICITY |
|
lauryl dimethyl amine oxide |
N/D | N/D | N/D | N/D |
|
Polylene Glycol Butyl Ether |
N/D |
N/D | N/D | N/D |
|
Sodium Metasilicate |
N/D |
N/D | N/D | N/D |
|
Waste Classification |
Non-regulated liquid waste |
| Disposal Method | Dispose of all liquid waste in accordance with all local, state and federal regulations. |
|
DOT |
Non-Regulated |
| OCEAN | Non-Regulated |
| AIR | Non-Regulated |
NA
The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the
most up to date information. The information given in this data sheet does not constitute or replace the user's own assessment of workplace risk
as required by other health and safety legislation.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.