Silicone Fluid Emulsion 40 RXSOL is a 40% emulsion of medium viscosity polydimethylsiloxane, using a nonionic surfactant system. It has been designed for use in many applications including automotive care, polishes, industrial release and textile lubricants. Silicone Fluid Emulsion 40 is designed to allow formulators to prepare a range of different strength products, from a single feedstock, to exact customer requirements, by simply mixing with water in the appropriate ratio. Stable emulsions down to 15% solids are easily prepared to order, using standard paddle or propeller stirrers.
- As ingredient in polishes, Silicone Fluid Emulsion 40 Rx is used to provide good gloss with minimum smear in both car and furniture polish formulations
-
Mould release of: Rubber or plastic parts (stoppers, screw tops, bungs, etc.) Release agent for manufacturing rubberized belts.
Release agent in printing industry. - Lubrication of Extruded rubber parts conveyor belts. Lubricant to prevent wear & increase abrasion resistance to latex rubber.
- Textile lubricant: Yarn manufacture Sewing thread lubrication
- Hosiery manufacture
- Sewing needle lubrication, Lubricant for sewing threads & yarn to eliminate friction & tension.
- Glass fabric exhaust filters
- Rubber Goods such as Rubber Parts, Bands, Mats, Tube etc.
- Tyre Manufacturing, Tire shine & auto detailing fluid.
- Foundries
- Surgical gloves
- Chappals, Soles and heels
- Latex Manufacturing
- Plastic release
- In Cold tyre remolding process
- Release of concrete products.
- Non-flammable silicone lubricant-excellent alternative to solvent based formulations.
-
Provides finish & improves water repellency for leather, vinyl & foam upholstery.
-
Gives excellent dry soft handle to the fabric.
-
Treated synthetic fabric have crispy handle.
Using procedure
Wipe, brush or spray the emulsion, usually diluted. Recommended starting concentration is 2 % to 5 %. (Total solids of Mould Release Agent by water). The user is recommended to determine the best conditions of dilution and application on a test sample before using in production. Breaking in the surface of new or freshly cleaned molds is best done by applying a light coat of undiluted release agent and running the empty mold through one or two heat cycles. After excess residual base fluid is wiped from the surface, the mold is ready for use.
| Composition | Polydimethyl Silicone & biodegradable surfactants |
| Appearance | Off-white to Milky White emulsion Liquid |
| Viscosity by B5 Cps | 500-1500 |
| % Solid content | 62 - 66 |
| pH of neat | 6 - 8 |
| Specific Gravity | 0.97 – 0.99 |
| Solubility | Water soluble Dispersible |
| Ionic nature | Non-ionic |
| Compatibility | With most finishing agents & adjunct auxiliaries |
Features :
- Non - Corrosive
- Non-Reactive
- Effective at lower concentrations
- Effective at wide range of temperature
- No smoking, breakdown,carbonization, buildup on molds and dies
- Surface of mould becomes abrasion resistant and waterrepellent.
- Good emulsion stability up to 50°C
- Good dilution stability up to 2% in water
- Good freeze-thaw stability (5 cycles)
Silicone Fluid Emulsion 40 RXSOL is recommended as a mould releasing agent in rubber industries. It can be used as universal release agent in rubber processing. Furthermore, the emulsion is suitable best for the formulation of paint and vinyl conditioners. The active agent contained supports an easy polishing of the conditioner formulations and improves the brightness. It is a specially modified emulsion of poly dimethyl siloxane to give dry, crispy feel to the fabrics especially to synthetics.
| Product Name | : Silicone Fluid Emulsion 40 |
| Part Number | : RXSOL-81-3076-210 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, ,Mumbai, Chennai, Vizag, Kolkata, UAE, OMAN
| Phone | +91 22 20871200-1500 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| 123@rxmarine.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | Wt.% |
| Polydimethylsiloxane | 63148-62-9 | 30-40% |
| Mixture Substance | Proprietory | 60-70% |
| Signal Word | None |
| Classification/Hazard Statement |
This chemical does not meet the hazardous criteria set forth by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200). However, this Safety Data Sheet (SDS) contains valuable information critical to the safe handling and proper use of this product. This SDS should be retained and available for employees and other users of this product. |
| Precautionary statements - prevention | Keep only in original container. Wash skin thoroughly after handling. Wear protective gloves/ protective clothing/ eye protection/ face protection.. |
| Precautionary statements - response |
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a doctor/ physician. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a doctor/ physician. Wash contaminated clothing before reuse. Absorb spillage to prevent material damage. Storage: Store locked up. Store in corrosive resistant stainless steel container with a resistant inner liner. Disposal: Dispose of contents/ container to an approved waste disposal plant. |
| Eye Contact | Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if require. |
| Skin Contact | Wash off immediately with plenty of water for at least 15 minutes. Use a mild soap if available. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention immediately. |
| Inhalation: | If inhaled, If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician if require. |
| Ingestion: | If swallowed, do not induce vomiting. Allow victim to rinse his mouth and then to drink 2-4 cupfuls of water. Never give anything by mouth to an unconscious person. Call a physician. |
| Notes to Physicians | Treat symptomatically. |
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Flash Point | > 100°C (Closed Cup) |
| Flamibility | Not Flammable |
| Fire Fighting Measures: | Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Determine the need to evacuate or isolate the area according to your local emergency plan. Use water spray to keep fire exposed containers cool. |
| Protective Equipment | Use personal protective equipment. |
| Hazardous combustionproducts |
Decomposition products may include the following materials: Thermal breakdown of this product during fire or very high heat conditions may evolve the following hazardous decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Silicon dioxide. Formaldehyde. |
| Advice for firefighters | Wear self-contained breathing apparatus. Wear full protective equipment. |
| Specific extinguishing methods | Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. In the event of fire and/or explosion do not breathe fumes. |
| Containment/Clean up |
|
| Enviromental Precaution | Do not allow contact with soil, surface or ground water. |
| Advice on safe handling | Use with adequate ventilation. Avoid eye contact. Handle in accordance with good industrial hygiene and safety practice. |
| Storage | Store away from incompatible materials. Do not store at temperatures above 49°C/120°F. |
| Incompatible Materials | Strong oxidizing agents. |
| Engineering Control | Mechanical ventilation is recommended. Showers. Eyewash stations. |
| Personal Protection |
Personal Protective Equipment for Routine Handling. Eyes: Use proper protection - safety glasses as a minimum. Skin: Washing at mealtime and end of shift is adequate. Suitable Gloves: No special protection needed. Inhalation: No respiratory protection should be needed. Suitable Respirator: None should be needed. |
|
Exposure Limits: |
Absence of values none found |
| Hygiene measures | Handle in accordance with good industrial hygiene and safety practice. |
| Form | Liquid |
| Colour | Milky White |
| Odour | Characteristic |
| Boiling point | 110.00°C; |
| Flash Point | >100°C |
| Freezing Point | 0 °C; 32 |
| pH | 6 |
| Evaporation rate | No data available |
| Flammability (solid, gas) | No data available |
| Upper explosion limit | No data available |
| Lower explosion limit | No data available |
| Explosive properties | No data available |
| Vapor pressure | No data available |
| Relative vapor density | No data available |
| Relative density | 0.99 |
| Water solubility | Completely miscible |
| Solubility in other solvents | No data available |
| Partition coefficient: octanol | No data available |
| Autoignition temperature | No data available |
| Thermal decomposition | No data available |
| Viscosity, kinematic | No data available |
| Explosive properties | No data available |
| Oxidizing properties | No data available |
| Molecular weight | No data available |
| VOC | No data available |
| Recativity | No data available |
| Stability | Stable under normal conditions. |
| Possibility of hazardous reactions | No dangerous reaction known under conditions of normal use. |
| Incompatible materials | Avoid to contact with oxidizing agents. |
| Hazardous Decomposition |
Carbon oxides. Steam. Hydrocarbons |
| Condition to Avoid | None Known |
| Polymerization | Will not occur. |
| Route of Exposure | Inhalation, Eye contact, Skin contact |
| Eyes |
Irritating to eyes. |
| Skin | Irritating to skin. Avoid contact with skin. |
| Ingestion | Harmful if swallowed. |
| Inhalation | No data available |
| Chronic Exposure | No data available |
| Acute oral toxicity | No data available |
| Acute inhalation toxicity | No data available |
| Acute dermal toxicity | No data available |
| Carcinogenicity | Based on the information provided, this product does not contain any carcinogens or potential carcinogens as listed by OSHA, IARC or NTP. |
| Ecotoxicity |
The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. |
| Toxicity to fish | No data available |
| Toxicity to daphnia and others | No data available |
| Toxicity to algae | No data available |
| Biodegradability | Not Determine |
| Persistence and degradability | No data available |
| Bioaccumulative potential | No data available |
| Mobility in soil | No data available |
| Remarks | Please consider the relevant national or regional provisions. Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities. |
| Waste Disposal | Disposal should be in accordance with applicable regional, national and local laws and regulations. |
| Note | This product is not regarded as dangerous goods according to the national and international regulations on the transport of dangerous goods in any mode of transport |
| DOT |
Not regulated |
| IATA |
Not regulated |
| IMDG |
Not regulated |
| Regulations | Contents of this MSDS comply with the OSHA Hazard Communication Standard 29 CFR 1910.1200. TSCA Status: All chemical substances in this material are included on or exempted from listing on the TSCA Inventory of Chemical Substances. |
| US Federal Regulations | |
|
CERCLA |
This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and Reauthorization Act (SARA) (40 CFR 355). |
|
SARA 313 |
Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain any chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372 |
| CWA (Clean Water Act) | This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40 CFR 122.42) |
| California Proposition 65 | This product does not contain any Proposition 65 chemicals |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |