Solvent Cleaner CITRO 2000 is a heavy-duty, solvent based cleaner that provides excellent cleaning performance on both ferrous and non-ferrous surfaces. It is a high performance replacement for ozone depleting chlorinated solvents (TCE). Solvent Cleaner 2000 provides excellent cleaning without the detrimental impact on the environment associated with chlorinated solvents; it is free rinsing and leaves a residue-free surface when followed by a hot air blow-off.
Heavy - Duty Applications Such As:
- Cleaning Greases and or Hydraulic Oils
- Cleaning straight cutting & drawing oils that may be sulfurized and/or chlorinated
Usage :
- Use as received in wipe, immersion, and/or spray application systems. The product should not be diluted with water
- Can be used as a soak cleaner for parts heavily contaminated with soil. Allow parts to soak for as long as necessary and follow with air blow off.
- Not recommended for use in vapor degreasing equipment, since the product has a flash point.
This product is used as delivered and not to be diluted with water. Please consult with our Engineer as to which control procedures are best for your use and for copies of these procedures.
| Properties | Result |
| Appearance Color (at 25 °C) | : Water White |
| Appearance Clarity (at 25 °C) | : Clear |
| Odour (at 25 °C) | : Citrus |
| Density (at 20 °C) g/cm2 | : 0.80 |
| Flash Point (Boil Temperature) | : 66 °C |
| Specific Gravity | : 0.768 |
| Vapor Pressure K Pa | : 0.5 |
Future & Benefit ::
- Economical & Versatile: The Solvent Cleaner CITRO 2000 is a non-conductive solvent based cleaner that is safe on both ferrous & non-ferrous materials
- High Solvency: The high level of solvency rapidly penetrates to loosen soil deposits under very little fluid impingement forces that are inherent in dip-immersion cleaning systems
- Non-Hazardous: This product does not contain any material shown to be a carcinogen by the National Toxicology Program (NTP), the International Agency for Research on Cancer (IARC), or OSHA.
-
Free Rinsing: No residual films are left to interfere with future operations. Solis will not re-deposit even under high solid loading conditions
Handling & Storage ::
As with all metalworking products, Solvent Cleaner CITRO 2000 should be kept away from dampness and extreme temperatures, 4-30°C is the recommended storage temperature. When storage outdoors cannot be avoided, drums should be covered and supported to minimize contact with rain water and direct sunlight.
Solvent Cleaner CITRO 2000 is unlikely to present any significant health or safety hazard when used as recommended by Quaker Chemical. Good standards of personal and industrial hygiene must be maintained by the user . In order to protect the environment, the product used should be adequately disposed of by a
licensed contractor. The packaging material should be handled by a recognized drum reconditioning firm.
| Product Name | : Solvent Cleaner CITRO 2000 |
| Part Number | : RXSOL-41-8791-220 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, Fujairah , Muscat and CANADA, Nairobi Kenya
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 2761 2100 :::AOH :0091 9821214367 |
| 123@rxmarine.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | EC No | Wt.% | Symbol |
| Naptha (Hydrotreated Heavy Petroleum) | 64742-48-9 | None | 90 - 100% | NA |
| D-limonene | 5989-27-5 | 227-813-5 | 05 - 10% | NA |
| Signal Word | Warning |
| Hazard Statements |
H315 - Causes skin irritation |
| Precautionary statements - prevention |
P273 - Avoid release to the environment |
| Precautionary statements - response |
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor/ physician. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a doctor/ physician. Wash contaminated clothing before reuse. Absorb spillage to prevent material damage. Storage: Store locked up. Store in corrosive resistant stainless steel container with a resistant inner liner. Disposal: Dispose of contents/ container to an approved waste disposal plant. |
| Eye Contact | Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first five minutes, then continue rinsing eye. Get immediate medical attention. |
| Skin Contact | Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Get medical attention if irritation persists. |
| Inhalation: | If inhaled, remove from area to fresh air. Get medical attention if respiratory irritation develops or if breathing becomes difficult. |
| Ingestion: | If swallowed, call a poison control center or doctor immediately. Do NOT induce vomiting. If conscious, drink plenty of water. |
| General Advice | The severity of the symptoms described will vary dependant of the concentration and the length of exposure. If adverse symptoms develop, the casualty should be transferred to hospital as soon as possible. |
| Suitable extinguishing media | Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. |
| Protective Equipment | Use personal protective equipment. |
| Hazardous combustion products | Thermal decomposition can lead to release of irritating gases and vapors Carbon oxides (COx), Nitrogen oxides (NOx). |
| Advice for firefighters | As in any fire, wear self-contained breathing apparatus and full protective gear. |
| Specific extinguishing methods | Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.Containers close to fire should be removed immediately or cooled with water. Hazchem code ADG |
| Personal precautions, protective equipment and emergency procedures |
Ensure adequate ventilation. Keep people away from and upwind of spill/leak. Avoid inhalation, ingestion and contact with skin and eyes. Wear suitable personal protective equipment.Respiratory protective equipment. |
| Enviromental Precaution | Do not allow contact with soil, surface or ground water.If the products get into drains, inform the relevant authorities immediately. |
|
Methods and materials for containment and cleaning up |
Stop leak if safe to do so. Contain spillage, and then collect with non combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Flush away traces with water. For large spills, dike spilled material or otherwise contain material to ensure runoff does not reach a waterway. |
| Advice on safe handling | Handle in accordance with good industrial hygiene and safety practice. Do not get in eyes, on skin or on clothing. Avoid spills and splashing during use. |
| Storage |
Technical measures/precautions Ensure adequate ventilation. Keep airborne concentrations below exposure limits. Storage precautions Keep containers tightly closed in a dry, cool and well-ventilated place Avoid contact with: Strong oxidizing agents Storage class Chemical storage. |
| Advice on general occupational hygiene | Use good work and personal hygiene practices to avoid exposure. When using do not smoke, eat or drink. Wash hands before eating, drinking or smoking Remove contaminated clothing |
| Component Information |
|
|||||||||||||||||||||
| Engineering Controls |
The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Control measures to consider: Adequate ventilation should be provided so that exposure limits are not exceeded. Use explosion-proof ventilation equipment. |
|||||||||||||||||||||
| Personal Protection |
Eye protection : Wear eye protection/ face protection. Hand protection : Wear the following personal protective equipment: Standard glove type. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. Skin protection : Personal protective equipment comprising: suitable protective gloves, safety goggles and protective clothing Respiratory protection : If engineering controls do not maintain airborne contaminant concentrations at a level which is adequate to protect worker health, an approved respirator may be appropriate. Respirator selection, use, and maintenance must be in accordance with regulatory requirements, if applicable. Types of respirators to be considered for this material include: Half-face filter respirator For high airborne concentrations, use an approved supplied-air respirator, operated in positive pressure mode. Supplied air respirators with an escape bottle may be appropriate when oxygen levels are inadequate, gas/vapor warning properties are poor, or if air purifying filter capacity/rating may be exceeded. |
|||||||||||||||||||||
| Hygiene measures | Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash face, hands and any exposed skin thoroughly after handling. Provide suitable facilities for quick drenching or flushing of the eyes and body in case of contact or splash hazard. | |||||||||||||||||||||
Gloves Suit
| Form | Liquid |
| Apperance | Clear, Colourless |
| Odour | Citrus |
| Odor threshold | Not applicable |
| Flash Point | 68 °C |
| Boiling Point | 185 °C |
| Freezing Point | 0 °C |
| pH | NA |
| Evaporation rate | 0.1 |
| Flammable Limits | |
| Upper explosion limit | UEL: 5.3 |
| Lower explosion limit | LEL: 0.7 |
| Autoignition Temperature | 335°C (635°F) |
| Vapor pressure | 0.5 kPa (0.48 mm Hg) at 20 C |
| Vapor density | No information available |
| Specific gravity | 0.768 @ 20 °C |
| Relative density | 0.80 @ 20°C. |
| Water solubility | Negligible |
| Viscosity | No data available |
| Partition coefficient: octanol | No data available |
| Pour Point : | -57°C (-71°F) |
| Thermal decomposition | No data available |
| Viscosity, kinematic | No data available |
| Explosive properties | No data available |
| Oxidizing properties | No data available |
| Recativity | No specific reactivity hazards associated with this product. |
| Stability | Stable under normal conditions and recommended use. |
| Possibility of hazardous reactions | No dangerous reaction known under conditions of normal use. |
| Incompatible materials | Avoid to contact with oxidizing agents. |
| Hazardous Decomposition |
Thermal decomposition can lead to release of irritating gases and vapors Carbon oxides (COx). |
| Condition to Avoid | Avoid heat, sparks, open flames and other ignition sources |
| Polymerization | Hazardous polymerization does not occur. |
|
Acute toxicity |
|
| Route of Exposure | Inhalation, Eye contact, Skin contact |
| Eyes |
Causes serious eye irritation. |
| Skin | Causes skin irritation. |
| Ingestion | Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. |
| Inhalation | Inhalation of vapors in high concentration may cause irritation of respiratory system. |
|
Unknown acute toxicity |
Not applicable. |
| Toxicology data for the components |
Oral LD50: > 5000 mg/kg Dermal TCLo: LC50 > 5000 mg/m3 |
| Sensitization | This product does not contain any components suspected to be sensitizing. |
| Mutagenic effects | This product does not contain any known or suspected mutagens. |
| Carcinogenicity | This product does not contain any known or suspected carcinogens |
| Reproductive toxicity | This product does not contain any known or suspected reproductive hazards. |
| Specific target organ toxicity -Single exposure | Not classified |
| Specific target organ toxicity -Repeated exposure | Not classified |
| Aspiration hazard | Not applicable. |
| Other information |
Key literature references and sources for data. See Section 16 for more information. |
|
Fish Toxicity (rainbow trout, goldfish, bluegill) |
LC50(96hr): Based on data for a similar component or preparation, this |
| Toxicity to alge | Not Available. |
| Toxicity to daphnia and others | Not Available |
| Toxicity to Fish (Chronic toxicity) |
NOELR: 0.778 mg/l Exposure time: 28 d Species: Oncorhynchus mykiss (rainbow trout) Method: QSAR modeled data |
| Persistence and degradability | This product will evaporate and commence degradation on exposure to light and air. |
| Bioaccumulative potential | This product will evaporate and commence degradation on exposure to light and air. |
| Mobility |
Medium: Air Method: Calculation, Mackay Level III Fugacity Model Content: 100 % |
| Results of PBT and vPvB assessment |
Not classified as PBT/vPvB by current EU criteria. |
| Remarks | Please consider the relevant national or regional provisions. Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities. |
| Waste Disposal | The product should not be allowed to enter drains, water courses or the soil. Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with local regulations. Dispose of wastes in an approved waste disposal facility |
| UN Number | Not Regulated |
| Proper shipping name | The product is not covered by international regulation on the transport of dangerous goods |
| Transport hazard class(es) | |
| ADR/RID | Hazard class/division Not regulated |
| Subsidiary risk IMDG | Hazard class/division Not regulated |
| Subsidiary risk IATA | Hazard class/division Not regulated |
| Packing group | |
| Packing group | Not regulated |
| Environmental hazards | |
| Environmental hazards | No |
| Marine pollutant | No |
| ADR/RID | |
| Hazchem code | ADG 3Z |
| Tunnel Category | Not Reguted |
| IMDG | |
| EmS Code | Not Reguted |
| IATA | |
| Packing Instruction (Cargo) | Not Reguted |
| Maximum quantity | Not Reguted |
| Packing Instruction (Passenger) | Not Reguted |
| Maximum quantity | Not Reguted |
| US Fedaral Regulations |
Toxic Substances Control Act (TSCA): |
| Superfund Amendments Reauthorization Act (SARA) Title III: |
Section 302 Extremely Hazardous Substances (EHS): None
Section 311/312 Hazard Categories: Fire Hazard Yes
Section 313 Toxic Chemicals: This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372: |
| Canadian Regulation |
Controlled Products Regulations: This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all the information required by the Controlled Products Regulations. WHMIS Hazard Class: B3 Canadian DSL Inventory: All ingredients are either listed on the DSL Inventory or are exempt. |
|
European Union Regulations: |
RoHS Compliance: This product is compliant with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003. This product does not contain any of the restricted substances as listed in Article 4(1) of the RoHS Directive. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |