Soot Remover STICK is a dry powder compound formulated for safe removal of soot and deposits from boilers and diesel engine exhaust systems.
Product Properties
If deposits are allowed to form on heat exchangers, the loss of efficiency can be directly related to extra fuel consumption. A 1 mm deposit is Approximately equivalent to a 10% efficiency loss, a 3 mm deposit can reduce efficiency by up to 50%. The normal ignition temperature of soot is around 600°C. This means that it is burned only in the hottest parts of the boiler or diesel exhaust systems. Due to the catalytic action of Soot Remover, the ignition temperature of the soot/deposit is reduced to less than 280°C. The carbon deposits are thus ignited, leaving an easily removed ash. The use of Soot Remover not only provides greater fuel efficiency, but also prevents acid formation in areas where severe corrosion could result in expensive damage, i.e. heat exchangers, super heaters, economizers, exhaust paths/stacks.
Directions for Use and Dose Rates
Soot Remover should be introduced to the boiler through a suitable port, preferably with a blower, ensuring that the powder is spread through the flame path towards the back of the combustion chamber. For Diesel engines, inject Soot Remover directly into the exhaust system upstream of the area to be treated.
For provides greater fuel efficiency, but also prevents acid formation in areas where severe corrosion could result in expensive damage, i. e. heat exchangers, super heaters, economizers, exhaust paths / stacks.
Soot Remover should be introduced to the boiler through a suitable port, preferably with an injector, ensuring that the liquid is spread through the flame path toward the back of the combustion chamber.
Boiler
|
Steam Rased Tons / Hour |
Fuel Used Tons/Day |
Dose Rate Kg/ Day |
|
3.00 |
5.50 |
1.00 |
|
6.00 |
11.00 |
2.00 |
|
9.00 |
16.00 |
3.00 |
| 12.00 | 21.00 |
3.50 |
| 15.00 | 27.00 |
4.00 |
| 23.00 | 41.00 |
4.50 |
| 31.00 | 55.00 |
5.00 |
| 46.00 | 82.00 |
5.50 |
| 62.00 | 110.00 |
6.50 |
Diesel Engine
|
Fuel Consumption Tons/Day |
Dose Rate Kg/ Day |
| 10.00 |
1.50 |
| 20.00 |
3.00 |
| 30.00 |
3.50 |
| 40.00 |
4.00 |
| 50.00 |
4.50 |
Product Properties:-
|
APPEARANCE: |
Blue green STICK |
|
DENSITY in g/cm3 at 15°C: |
1.2-1.4 |
|
FLASH POINT (PMCC) °C: |
Not applicable |
|
COMPATIBILITY: |
|
|
Metal: |
If moist, may attack mild steel, iron and aluminum Rubber: No known effect |
|
Rubber: |
| Product Name | RXSOL-70-7010-025 |
| Product Type | SOOT STICK |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
STOCK point : KANDLA, Mumbai, Kolkata, Chennai, Visakhapatnam, Fujairah
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
| Ammonium nitrate | 15-20 | 6484-52-2 | 229-347-8 | 8 | O |
| Potassium nitrate | 15-20 | 7757-79-1 | 231-818-8 | 8 | O |
|
Copper hydroxide carbonate |
10-30 |
12069-69-1 |
235-113-6 |
22 |
Xn |
| Copper nitrate (43% in H2O) | 5-10 | 0031-43-3 | 221-838-5 | 22, 36/38 | Xn |
| Magnesium nitrate | 10-20 | 13446-18-9 | 233-826-7 | 8, 16 | O |
|
Non classified ingredients |
20-30 |
|
|
|
|
Chemical Name Concentration CAS Number EC Number R Phrases* Symbols
Harmful
|
Odour |
Odourless |
|
Appearance |
Hygroscopic, powder, green, soluble in water |
|
Contact with eyes |
Causes irritation |
|
Contact with skin |
In cases of severe exposure, irritation may develop |
|
Inhalation |
Severely irritating to respiratory system |
|
Ingestion |
Harmful if swallowed |
|
Contact with skin |
Remove contaminated clothing Wash affected area with plenty of water Seek medical attention if irritation persists Contaminated clothing should be laundered before reuse |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes Irrigate eyes thoroughly whilst lifting eyelids Obtain immediate medical attention |
|
Ingestion |
Induce vomiting (only if patient is conscious) Never give anything by mouth to an unconscious person Give water or milk to drink Seek immediate medical attention |
|
Inhalation |
Inhalation is unlikely to occur Remove patient to fresh air When in doubt or symptoms persist, seek medical attention |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) |
- Non-combustible solid
- Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
- Prevent run off water from entering drains if possible
|
Personal Precautions |
Wear protective clothing as per section 8. |
|
Environmental Precautions |
Do not allow to enter public sewers and watercourses. |
|
Clean Up Actions |
Sweep or shovel-up spillage and remove to a safe place Ventilate the area and wash spill site after material pick-up is complete. |
|
Special Precautions |
Wear protective clothing as per section 8. |
|
Handling |
Wear protective clothing Avoid contact with skin and eyes Do not breathe dust Eyewash bottles should be available. |
|
Storage |
Keep container in a cool, well ventilated placeProtect from moisture. |
|
Exposure Limits |
No exposure limits have been set for this substance |
|
Exposure controls |
No special precautions are required for this product |
|
Occupational exposure controls |
Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) Respiratory protection may be required under exceptional circumstances when excessive air contamination exists. |
Goggles Gloves Suit No_Smoking
|
Odour |
Odourless |
|
Appearance |
Hygroscopic, powder, green, soluble in water |
|
pH |
6 at 1 % concentration |
|
Boiling point |
Not applicable |
|
Vapour pressure |
Not applicable |
|
Vapour density |
Not applicable |
|
Melting point |
Not known |
|
Water solubility |
100 g/l |
|
Density |
1000 kg/m3 |
|
Non |
Combustible solid |
- Stable
- Avoid overheating, Keep away from frost
- See Section 5
|
Toxicological information |
LD50 (oral,rat) 1350 mg/kg |
|
Inhalation |
Causes irritation |
|
Contact with skin |
Causes irritation |
|
Contact with eyes |
Causes severe irritation |
|
Ingestion |
Harmful if swallowed (R22) The ingestion of significant quantities may cause damage to stomach lining The ingestion of significant quantities may cause diarrhoea The ingestion of significant quantities may cause pain |
|
Carcinogenicity |
No evidence of carcinogenic effects |
|
Ecotoxicity |
May cause acute effects in the aquatic environment |
|
Mobility |
Water solubility ~ 100 g/l |
|
Persistence and Biodegradability |
Degrades by hydrolysis |
|
Bioaccumulation Potential |
Bioaccumulation of the components in this product is insignificant. |
|
Other Adverse Effects |
No environmental problems are expected when the product is used / handled correctly. In its intended use, the product will not be released into the environment. |
|
Classification |
EU Waste class: 06.04.02 |
|
Disposal Considerations |
Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation |
| Proper Shipping Name | ||||
| UN | ||||
| Proper Shipping Name: |
Toxicsolid, inorganic, n.o.s(Ammonium Chloride) |
|||
| UNNo.: | 3288 | |||
| Hazard Class | 6.1 | PackingGroup: | III | |
| Road/Rail(ADR/RID) | ||||
| Proper Shipping Name: |
Toxicsolid, inorganic, n.o.s(Ammonium Chloride) |
|||
| ADR UN No.: | 3288 | |||
| ADR Hazard Class | 6.1 | Tremcard: |
61GT5-III |
|
|
Sea(IMDG) |
||||
| Proper Shipping Name: |
Toxicsolid, inorganic, n.o.s(Ammonium Chloride) |
|||
| IMDG UN No.: | 3288 | |||
| IMDG Hazard Class. | 6.1 | IMDG Pack Group.: | III | |
| IMDG EmS | F-A, S-A | IMDG subrisk |
N/A |
|
| IMDG Labels |
6.1 |
IMDG Flash point |
N/A |
|
|
Air(ICAO/IATA) |
||||
| Proper Shipping Name |
Toxicsolid, inorganic, n.o.s(Ammonium Chloride) |
|||
| ICAO Un No.: | 3288 | |||
| ICAO Hazard Class.: | 6.1 | ICAO Packing Group. | III | |
| ICAO subrisk: |
N/A |
ICAO Labels |
6.1 |
|
|
DOT/ CFR (US Department of Transportation) |
||||
| DOT Proper Shipping Name: |
Toxicsolid, inorganic, n.o.s(Ammonium Chloride) |
|||
| Hazardous Material: |
Ammonium Chloride |
|||
| Hazard Class: | 6.1 | Identification Number | UN 3288 | |
| DOT Labels | 6.1 | DOTFlashpoint |
N/A |
|
|
Risk Phrases |
Harmful if swallowed |
|
Safety Phrases |
Wear suitable protective clothing, eye/face protection If swallowed seek medical advice immediately and show this container or label |
The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.This Safety Data Sheet is provided in compliance with The Dangerous Substances Directive.This Safety Data Sheet is provided in compliance with The Dangerous Preparations Directive
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.