Slop Oil Breaker Manufacturer, Exporter, Distributor, Supplier in MUMBAI, MAHARASHTRA.
Thursday, October 29, 2020 Category: UncategorizedMUMBAI CHEMICAL is leading one Largest Supplier, Manufacturer and Exporter of Slop Oil Breaker in Maharashtra, Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli.
Product Information:
Slop Oil Breaker 25 Ltr : RXSOL-20-2006-020
RXSOL-20-2006-020 has the unique feature that dissociates slope to separate oil and water. This product is formulated to meet the ever changing regulations for the treatment of tank cleaning waste water after using petroleum based solvents, and Bunker ‘C’ cleaners.
Product Application:
Using Procedure:
For light contamination dilute with water in the ratio 1:20 . For medium contamination dilute with a petroleum solvent. And for heavy contamination concentrated RXSOL-20-2006-020 is suggested.
For Engine Room & Cargo Tank Cleaner
Product Description:- RXSOL-20-2006-025 is an all purpose degreaser emulsifiers, It is an excellent blend of powerful solvent base and emulsifying inorganic products .Specially designed for engine room and cargo tank cleaning .Main feature of RXSOL-20-2006-025 is, it finally dissociate slop emulsion to separate oil and water .This provide us with ability to dispose of waste solution as per MARPOL & IMO rules and regulation .
Dosage:- Dose rate and results will vary depending on the amount of contamination . For light contamination dilution with water up to 1:20 is recommended whereas medium contamination dilution with Petro solvent , And for heavy contamination near RXSOL CB 2006 is suggested to use.
Procedure of use :- RXSOL-20-2006-025 is recommended for local cleaning & degreasing of engine rooms, bilges & tank tops. It may be applied by brush, spray, immersion, soaking, or any other conventional means. RXSOL-20-2006-025 is used neatly. Allow a residence time of at least 20- 45 minutes where possible, to ensure good penetration & emulsification. Finally wash the system with hot water & high pressure. The emulsion residue after cleaning must be allowed to separate in a holding tank for at least 3-5 hours before passing through an oily water separator.
Tank Cleaning after Mineral Oils/ Lube Oils / Slope-Black Oil
1 )Fill the tank with 1-35 litres per ton wash water. Best results are obtained when water is heated to a temperature between 65°C & 80°C then stripped constantly and transferred to a holding tank for separation. The time for this will vary depending on amount of RXSOL-20-2006-025 used & nature of oil being cleaned.Generally,12 hours should be sufficient before the water phase can be removed.
2) Direct Cleaning. Spray directly RXSOL-20-2006-025 on tank surfaces to be cleaned, left for at least 30 minutes. Finally wash with a hydro-gating (high pressure) machine. Hot water between 50°C & 80°C recommended.
Product Note:
Product Technical Specification:
Available Packing Size: 20 , 25 Ltr.
MUMBAI CHEMICAL offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical. Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Slop Oil Breaker with advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers. Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping a ready stock of Slop Oil Breaker for more information, any support and price, Feel free to contact us through our Email id mumbaichems @ gmail.com
We are presently operative in all over India and you can buy our products from various location Like Andhra Pradesh, Tamil nadu, Gujarat , West Bengal and also all seaports of India. We do have many satisfied customers in this Industries because of our QUALITY, PRICING & SERVICE. Our Company is also a Major Exporter & Mfg of Slop Oil Breaker in UAE, Oman , Vietnam, Europe, Africa, Bahrain, Qatar, Africa & many more countries.
Supply Locations :
Maharashtra , Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli, All over Maharashtra.
Request for Quote and Get Heavy Discount on Price
Related Posts:
Resine Mixed Bed Manufacturer, Exporter, Distributor, Supplier in MUMBAI, MAHARASHTRA.
MUMBAI CHEMICAL is leading one Largest Supplier, Manufacturer and Exporter...
Insulating Paints And Coatings Manufacturers, Exporter, Distributors and Suppliers in Mumbai India
Mumbai Chemical industry Based in Mumbai India. Mumbai chemical are...
Premium Sodium Aluminate Supplier in Mumbai: Catering to Global Demand
As a leading chemical supplier, manufacturer, and distributor based in...