RXSOL 27 is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors. One operation cleans and protects the engine – and also inhibits corrosion.
Blend of non-ionic surfactants, corrosion inhibitors, organic solvents and demineralised water.
RXSOL Gas Turbine Compressor Cleaner & Corrosion Inhibitor
Brand: RXSOL – RX Marine International
Product Category: Gas Turbine Maintenance Chemicals / Compressor Cleaning Chemicals / Industrial Corrosion Inhibitors
Product Type: Water-Based Compressor Cleaner with Corrosion Protection
Product Description
RXSOL Gas Turbine Compressor Cleaner & Corrosion Inhibitor is a proposed specialized cleaning formulation designed for removing atmospheric contamination, oily deposits, airborne dust, grease and other accumulated impurities from gas turbine axial compressor blades and associated components.
During gas turbine operation, contaminants present in the intake air can accumulate on compressor blades, vanes and internal surfaces. These deposits may reduce aerodynamic efficiency, restrict airflow and contribute to compressor fouling.
RXSOL Gas Turbine Compressor Cleaner & Corrosion Inhibitor is intended to combine effective cleaning with temporary corrosion protection, helping maintain compressor cleanliness and reduce corrosion risk during suitable maintenance operations.
The proposed formulation uses low-residue surfactants, water-compatible cleaning agents and corrosion-inhibiting additives.
Important: Gas turbine compressor cleaning is an OEM-controlled application. The finished chemical must meet the turbine manufacturer's limits for ash, sodium, potassium, chlorides, sulfur, residue, material compatibility and cleaning method before use.
Key Features and Benefits
-
Designed to remove oily deposits, airborne dust and compressor fouling.
-
Water-based cleaning system.
-
Low-foaming formulation for controlled compressor washing.
-
Intended for online and offline compressor washing, subject to OEM approval.
-
Helps disperse and remove accumulated contaminants.
-
Proposed temporary corrosion protection for compatible metallic surfaces.
-
Designed for low-residue rinsing.
-
Suitable for development as a concentrate for dilution with demineralized water.
-
Intended for industrial gas turbines and selected turbine-driven compressor systems.
-
By spray ring or lance in either starter-driver (off-line) or fired (on-line) wash as directed by the engine manufacturers, in the quantities recommended in the engine manual. It is essential during hot wash that the cleaner should leave as little ash residue as possible to avoid blocking turbine blade cooling holes. RXSOL 27 has a maximum ash content of <0.01%, as part of the compliance with OEM specifications for compressor washing fluid.
The unique corrosion inhibitor allows engines to be left ready for an instant restart, even in salty offshore conditions.
How RXSOL Gas Turbine Cleaner Works
Surfactant Action: Wetting agents loosen oily deposits and atmospheric contamination from compressor surfaces.
Solvent Action: Water-compatible solvents help dissolve hydrocarbon contamination and accumulated organic deposits.
Dispersion: Cleaning agents assist in suspending loosened particles so that they can be removed during washing and rinsing.
Corrosion Inhibition: Compatible corrosion-inhibiting components are intended to reduce corrosion risk during cleaning and temporary shutdown.
Important Formulation Considerations
For manufacturing an RXSOL gas turbine compressor cleaner, the formulation should prioritize:
-
High-purity demineralized water
-
Low-residue, low-foaming nonionic surfactants
-
Low-ash water-compatible solvents
-
Turbine-compatible corrosion inhibitors
-
Very low sodium, potassium, chloride and other harmful inorganic contaminants
-
Compatibility with compressor alloys, coatings, elastomers and synthetic turbine oils
Free From sodium nitrite, sodium silicate, sodium carbonate or phosphate-based corrosion inhibitor packages without OEM approval. Such additives may leave inorganic residues and create unacceptable hot-corrosion risks.
Gas turbine compressor cleaning specifications can be substantially more restrictive than those for ordinary industrial degreasers.
|
: |
1.01 |
|
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
Technical Specifications
|
Parameter |
Published RXSOL Roto-Clean Specification |
|---|---|
|
Appearance |
Clear, pale straw-coloured liquid |
|
Odour |
Mild |
|
pH |
7.5–8.5 |
|
Specific Gravity |
Approximately 1.01 |
|
Water Solubility |
Completely miscible |
|
Ash Content |
Below 0.01% |
|
Total Alkali Metals |
Below 0.5 ppm after dilution |
|
Aromatic Compounds |
None stated |
|
Alkylphenol Ethoxylates |
None stated |
|
Total Chlorine |
Below 10 ppm in concentrate |
These specifications should be confirmed with current RXSOL quality control records before inclusion in a customer-issued COA.
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
Appearance
Clear pale straw coloured liquid with a mild pleasant odour.
Solubility
Completely soluble in water. No agitation required.
Compatibility
Not corrosive or detrimental to any of the materials normally used in gas turbine engines or aircraft components. No adverse effect on synthetic turbine oils.
-
Compressor deposits, caused by dust, dirt, and combustion byproducts, reduce airflow, leading to decreased power output, higher fuel consumption, and increased exhaust temperatures.
Prevent Corrosion: -
Compressor cleaning fluids often contain corrosion inhibitors to protect the engine's metal components from rust and degradation, especially in harsh environments.
Improve Efficiency: -
By removing these deposits, cleaning fluids help restore the compressor's original aerodynamic profile, optimizing airflow and improving overall engine efficiency.
Extend Engine Life: -
Regular cleaning can help prevent more serious issues caused by fouling and corrosion, potentially extending the lifespan of the gas turbine.
Types of Cleaning:
-
On-line Cleaning:Performed while the engine is running at low or idle speed. This method is convenient but may not be as effective as offline cleaning for removing stubborn deposits.
-
Performed when the engine is shut down. This allows for more thorough cleaning and the use of higher concentrations of cleaning fluid.
Application Methods
|
Cleaning Method |
Application |
|---|---|
|
Online Compressor Washing |
Cleaning while the gas turbine operates, subject to OEM procedures |
|
Offline / Crank Washing |
Cleaning during shutdown using approved wash equipment |
|
Manual Component Cleaning |
Cleaning accessible dismantled components, subject to material compatibility |
For online washing, demineralized water must meet the relevant turbine manufacturer's quality requirements. A pure-water rinse is normally required after detergent washing.
Biodegradable: Many modern cleaning fluids are formulated to be environmentally friendly and biodegradable.
Water-based: They typically use water as the primary solvent.
Neutral pH: The fluids are often formulated to have a neutral pH to minimize any potential corrosion or damage to engine components.
Specific Gravity: This indicates the density of the fluid.
Ash Content: A low ash content is desirable to avoid leaving behind any residue that could cause further fouling.
Corrosion Inhibitors: These additives help protect metal surfaces from corrosion.
Compatibility: The cleaning fluid must be compatible with all the materials used in the gas turbine engine.

| Product Name | RXSOL-16-1927-210 |
| Product Type | RXSOL 27 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Vizag, Chennai, FUjairah, Muscat, Nairobi
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| care@rxmarine.com |

This product contains no hazardous ingredients ( Blend of non-ionic surfactants, Corrosion Inhibitors, Organic solvents and demineralised water.)

| skin contact | Irritant |
| eye contact | Irritant |
| ingestion |
Not toxic by ingestion, may cause mild lung or throat irritation at high concentrations, prolonged or repeated contact may cause drying of skin |
|
INHALATION |
If irritation occurs, remove person to fresh air |

|
EYE CONTACT |
Immediately flush eye with clean water for at least 15 minutes, get medical attention |
|
SKIN CONTACT |
Remove contaminated clothing and shoes, flush area with copious amounts of clean water and soap, seek |
|
INHALATION |
If irritation occurs, remove person to fresh air |
|
INGESTION |
Do NOT induce vomiting, do not give anything by mouth to an unconscious person, seek medical attention immediately |

|
FLASH POINT |
>100°C / 212 °F (PMCC) |
|
CONDITIONS OF FLAMMABILITY |
Non-flammable, water based |
|
EXTINCTION MEDIA |
Use dry chemical, CO2, alcohol-proof foam, sand or fine water spray |
|
FIRE AND EXPLOSION HAZARD |
Oxides of nitrogen, carbon monoxide, carbon dioxide. Fumes are acrid and irritating |

|
METHODS FOR CLEANING UP SMALL SPILLS |
Absorb with sand or vermiculite, sweep up and place in container for later disposal. |
|
METHODS FOR CLEANING UP LARGE SPILLS |
Dike for later salvage or disposal. In water, divert flow to prevent spread of product, remove for disposal |
|
ENVIRONMENTAL PRECAUTIONS |
Do not allow product or run off to enter any sewer or other water source. |

|
HANDLING |
Use in well ventilated area, wear recommended personal protective equipment and wash after handling |
|
STORAGE |
Store in dry, cool well ventilated area out of direct sunlight and away from ignition sources. The product has a shelf life of 5 years. |

|
ENGINEERING MEASURES |
Use mechanical ventilation if used in a confined area or at elevated temperatures |
|
EYES PROTECTION |
Goggles should be worn |
|
HAND PROTECTION |
Impermeable gloves such as butyl rubber, wash after handling |
|
SKIN PROTECTION |
Long sleeves and long pants to prevent skin contact and closed toe footwear to prevent skin contact |

|
PHYSICAL STATE |
Liquid |
|
APPEARANCE |
Clear, pale straw color |
|
ODOR |
Mild, pleasant |
|
SPECIFIC GRAVITY |
1.01 |
|
DENSITY |
8.35 lbs/gal |
|
PH |
7.2-7.5 |
|
FREEZING POINT |
0 °C / 32 °F |
|
BOILING POINT |
≥100ºC / 212 °F |

|
STABILITY |
Product is stable under normal temperature and pressure |
|
MATERIALS TO AVOID |
Product is incompatible with strong oxidizing or reducing agents |

| Skin contact | irritant |
| Eye contact | irritant |
| ingestion |
Not toxic by ingestion, may cause mild lung or throat irritation at high concentrations, prolonged or repeated contact may cause drying of skin |
|
INHALATION |
If irritation occurs, remove person to fresh air |

WATER HAZARD CLASS:- slightly hazardous for water when discharged in large volumes

DISPOSAL :- Dispose of by methods in compliance with local, state and federal regulations.
MOBILITY :- May penetrate the soil as it is biodegradable.
SEWAGE TREATMENT PLANTS :- Not toxic to sewage organisms at concentrations expected to be found in sewage treatment
plants .

N/A

N/A

The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.