pH Booster Morpholine Base Manufacturer, Exporter, Distributor, Supplier in MUMBAI, MAHARASHTRA.

MUMBAI CHEMICAL is leading one Largest Supplier, Manufacturer and Exporter of pH Booster Morpholine Base in Maharashtra, Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli.

Product Information:
pH Booster Morpholine Base : RXSOL-40-5054-020
RXSOL pH Boosters are liquid  alkaline formulations, used as alkalinity source for boiler feed water. It is synergized with properties of pH boosting and water conditioning.
Morpholine has unique pH adjusting qualities and uses and distribution throughout the steam plant helps to protect from corrosion. Morpholine is often used in conjunction with low concentrations of hydrazine or ammonia to provide a comprehensive all-volatile treatment chemistry for corrosion protection for the steam systems of such plants. Morpholine decomposes reasonably slowly in the absence of oxygen at the high temperatures and pressures in these steam systems.
Boiler water pH booster or alkalinity builder is a multipurpose Boiler Water Treatment Chemical that increases the alkalinity and pH of boiler water for corrosion inhibition and also aids in removal of sludge or boiler deposits and prevention of scaling in boiler tubes. Normally the Boiler feed water pH should be at 9.5-10 for avoiding boiler tubes corrosion or rusting due to acidic attack.

Product Application:
RXSOL-40-5024-020 have antiscalant properties  which will help to formation of scale inside the boiler. This makes it profitable for users by savings of power and labor, and increase in production.  As Uses of antiscalants is a prime necessity to meet up with production targets.
PH booster is an alkaline liquid formulation designed to increase alkalinity of  the boiler. It is also used to reduce corrosion of the feed water tank,lines & pump.
CORROSION REDUCTION
PH booster Increases ph of the feed water reducing corrosive ness.it also increases alkalinity in boiler water reducing scaling & corrosion of the boiler metal.
EASY SLUDGE REMOVAL
PH booster helps in formation of non adherent sludge.it fluidizes the sludge which is then removed easily during normal blow-down. non- toxic and non-corrosive liquid formulation and therefore can be handled  easily.
Using Procedure:
RXSOL  pH Boosters are dosed depending upon the feed water characteristic and alkalinity requirement. It is compatible with all other treatment chemicals. It is dosed exactly as per the dosage rate and method of RXSOL-50-5001-025
EASY TO HANDLE
PH booster is non- toxic liquid formulation and therefore can be handled  easily. pH booster should be dosed continuously. Does the dilute solution  in the boiler feed  water line.

Product Note:
Key Features & Benefits:-
Minimizes corrosion of feed water tank, lines and pump
Imparts water and sludge conditioning to minimize scaling and deposition
Compatible with other treatment Chemicals
Completely biodegradable chemicals
Its anti scale property helps and Prevent from Scaling
Minimum downtime required for descaling
Multipurpose, therefore easy to use
Proper maintenance of boiler saves Power / Fuel saving up to 70%. Formation of Scale is a major issue and control of scale makes effective heat transfer which Increases productivity.

STORAGE & HANDLING
PH booster should be stored in an air tight container away from direct heat.
Always store at a cool & dry place.
Handle using goggles & do not breathe in the vapors.
Wash thoroughly in case of contact. Do not swallow.

PH Control
Maintenance of proper pH throughout the boiler feed water, boiler, and condensate systems is essential for corrosion control. Most low-pressure boiler system operators monitor boiler water alkalinity because it correlates very closely with pH, while most feed water, condensate, and high-pressure boiler water requires direct monitoring of pH. Control of pH is important for the following reasons:
corrosion rates of metals used in boiler systems are sensitive to variations in pH
low pH or insufficient alkalinity can result in corrosive acidic attack
high pH or excess alkalinity can result in caustic gouging/cracking and foaming, with resultant carryover
speed of oxygen scavenging reactions is highly dependent on pH levels
The pH or alkalinity level maintained in a boiler system depends on many factors, such as system pressure, system metals, feed water quality, and type of chemical treatment applied.
The corrosion rate of carbon steel at feed water temperatures approaches a minimum value in the pH range of 9.2-9.6 . It is important to monitor the feed water system for corrosion by means of iron and copper testing. For systems with sodium zeolite or hot lime softened makeup, pH adjustment may not be necessary. In systems that use deionized water makeup, small amounts of caustic soda or neutralizing amines, such as morpholine and cyclohexylamine, can be used.
In the boiler, either high or low pH increases the corrosion rates of mild steel The pH or alkalinity that is maintained depends on the pressure, makeup water characteristics, chemical treatment, and other factors specific to the system.
The best pH for protection of copper alloys is somewhat lower than the optimum level for carbon steel. For systems that contain both metals, the condensate and feed water pH is often maintained between 8.8 and 9.2 for corrosion protection of both metals. The optimum pH varies from system to system and depends on many factors, including the alloy used
To elevate pH, neutralizing amines should be used instead of ammonia, which (especially in the presence of oxygen) accelerates copper alloy corrosion rates. Also, amines form protective films on copper oxide surfaces that inhibit corrosion.

Product Technical Specification:
Properties  Unit                 Typical Value
Form and Appearance     –Clear Colorless Liquid
Odor                                 –Characteristic
pH (neat)pH                        Alkaline
Solubility                           –Completely Soluble in Water

Available Packing Size: 20, 25 Ltr.

MUMBAI CHEMICAL offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical. Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of pH Booster Morpholine Base with advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers. Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping a ready stock of pH Booster Morpholine Base for more information, any support and price, Feel free to contact us through our Email id mumbaichems@gmail.com

We are presently operative in all over India and you can buy our products from various location Like Andhra Pradesh, Tamil nadu, Gujarat , West Bengal  and also all seaports of India. We do have many satisfied customers in this Industries because of our QUALITY, PRICING & SERVICE. Our Company is also a Major Exporter & Mfg of pH Booster Morpholine Base in UAE, Oman , Vietnam, Europe, Africa, Bahrain, Qatar, Africa & many more countries.

Supply Locations :
Maharashtra , Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli, All over Maharashtra.

Request for Quote and Get Heavy Discount on Price

Related Posts:

Sodium Lauryl Sulphate Manufacturer, Exporter, Distributor, Supplier in MUMBAI, MAHARASHTRA.

MUMBAI CHEMICAL is leading one Largest Supplier, Manufacturer and Exporter...

High Foam High Ph Cleaner Degreaser Manufacturer, Exporter, Distributor , Supplier in Mumbai India

Mumbai Chemical industry Based in Mumbai India. Mumbai chemical are...

Engine Parts Washing Solvent Manufacturer, Exporter, Distributor, Supplier in MUMBAI, MAHARASHTRA.

MUMBAI CHEMICAL is leading one Largest Supplier, Manufacturer and Exporter...