Tank Cleaner Manufacturer in Mumbai

MUMBAI CHEMICAL is leading one Largest Supplier, Manufacturer and Exporter of NITRIC ACID 68-72% in Maharashtra, Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli.

Product Information:
NITRIC ACID 68-72% 50 Ltrs : RXSOL-20-1106-050
Nitric Acid 68-72% is removes iron residue and forms an oxide layer that boosts the corrosion of the stainless steel instead to improve the corrosion resistance of part made from austenitic, ferritic and martensitic corrosion resistance  steel. It is a non-foaming acid that breaks up and removes mineral deposits that build up on equipment surfaces. Used as recommended it does not corrode stainless steel.
High carbon, high chromium martensitic 440C grades which are selected for high hardness and resistance may be exempt from passivation treatments at the discretion of the procuring activity.

Product Application:
Transparent, colour less or yellowish corrosive liquid. A strong oxidizing agent that will attack almost all metals.
Passivation Treatments
Grades with at least 16% chromium (except free machining grade such as 303):
20-50% nitric acid, at room temperature to 40oC for 30-60 minutes.
Grades with less than 16% chromium (except free machining grades such as 416):
20-50% nitric acid, at room temperature to 40oC for 60 minutes.
Free machining grades such as 303, 416 and 430F:
20-50% nitric acid + 2-6% sodium dichromate, at room temperature to 50oC for 25 40 minutes
Using Procedure:
High carbon, high chromium martensitic 440C grades which are selected for high hardness and resistance may be exempt from passivation treatments at the discretion of the procuring activity.

PRECAUTION :
1> Loose iron particles or other foreign particles must be removed or they will appear as rust or stain spots. may become smeared over or embedded into the surface of corrosion-resistant steel parts.
2> DO avoid chlorides that, in excess, can cause a harmful flash attack. When possible, use only a good grade of water containing less than about 50 parts per million (ppm) of chlorides. Tap water is usually adequate, and in some cases up In several hundred ppm chlorides can be tolerated.
Chlorides: are present in many cleaning agents. This entails risk of pitting corrosion of stainless steel. If a cleaner containing chlorine, chlorides, bleaches orhypochlorites is used it must be afterwards promptly and thoroughly cleaned off.

Product Note:
During processing operations such as forming, machining, tumbling and lapping, iron particles or other foreign particles may become smeared over or embedded into the surface of corrosion-resistant steel parts. These particles must be removed or they will appear as rust or stain spots.
High carbon, high chromium martensitic 440C grades which are selected for high hardness and resistance may be exempt from passivation treatments at the discretion of the procuring activity.

Product Specification:  
(HNO3) 68% – 72% {61.5 (+/-) 0.5% by WT}
Specific Gravity : 1.41 at 20 *C
Chloride as (Cl):  0.0006%
Sulphate as SO4 :  0.001%
Arsenic as (As):  0.0001 % max.
Residue on Ignition Residue on Ignition
Heavy Metal as (Pb): 0.001%

Available Packing Size: 25, 50, 210 Ltrs.

MUMBAI CHEMICAL offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical. Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of NITRIC ACID 68-72% with advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers. Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping a ready stock of NITRIC ACID 68-72% and for more information, any support and price, Feel free to contact us through our Email id mumbaichems@gmail.com

We are presently operative in all over India and you can buy our products from various location Like Andhra Pradesh, Tamilnadu, Gujarat , West Bengal  and also all seaports of India. We do have many satisfied customers in this Industries because of our QUALITY, PRICING & SERVICE. Our Company is also a Major Exporter & Mfg of NITRIC ACID 68-72% in UAE, Oman , Vietnam, Europe, Africa, Bahrain, Qatar, Africa & many more countries.

Supply Locations :
Maharashtra , Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli, All over Maharashtra.

MUMBAI CHEMICAL is leading one Largest Supplier, Manufacturer and Exporter of Carbon Eco Clean in Maharashtra, Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli.

Product Information:
Carbon Eco Clean : RXSOL-20-2054-125
Specially designed for removal of carbon rust from any steel surface area and rust stains from brass, copper, stainless steel, aluminum, wood and ceramic surfaces. Also acts as a surface brightener.

Product Application:
Using Procedure:
It should be applied in full concentrated for heavy stains, or diluted with 20-50% with fresh water for light strains.
Specially designed for removal of carbon rust from any steel surface area and rust stain from Brass,Copper,S.S wood,ceramic and aluminium surfaces , painted or not . And act as surface brightener.
Procedure for Use :
RXSOL-20-2054-125 is highly concentrate
Dilute in water (always use plastic jar and  RXSOL-20-2054-125 should be added to  water never add water to RXSOL-20-2054-125
Surface should be sound clean and free from oil, grease, dirt etc.
Diluted materials apply on rusted area for 15 to 20 minutes then wash off with water repeat if necessary. (For stubborn rusted stains.)

Product Note:
For steel surfaces; remove oil, grease and old paint. Wet down entire surface with neat Metal Bright- Rx and allow to dry. Second wash may be necessary. Surface should have a grey/white appearance when the Carbon Eco Clean is dry. Steel surfaces will have a resistance to rust and will render a good base for paint. For removal of rust stains on painted surfaces and wood, Carbon Eco Clean should be applied at full concentration for heavy stains, or diluted to 20-50% for light stains. Allow to soak for 15 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.
Spraying Direction: Using an empty / clean 210 liter drum, fill with 190 liter of fresh water and add 20 liters of Carbon Eco Clean This makes a 10% solution, which can be sprayed onto areas in coated tanks where rust stains are showing and over actual rusted areas. Once spraying is completed, wait 20-30 minutes and fresh water rinse with lots of water, if possible use butter worth machines for a more efficient result.

Product Specification:                                                                    

Available Packing Size: 125 Ltrs.

MUMBAI CHEMICAL offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical. Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Carbon Eco Clean with advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers. Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping a ready stock of Carbon Eco Clean and for more information, any support and price, Feel free to contact us through our Email id mumbaichems@gmail.com

We are presently operative in all over India and you can buy our products from various location Like Andhra Pradesh, Tamilnadu, Gujarat , West Bengal  and also all seaports of India. We do have many satisfied customers in this Industries because of our QUALITY, PRICING & SERVICE. Our Company is also a Major Exporter & Mfg of Carbon Eco Clean in UAE, Oman , Vietnam, Europe, Africa, Bahrain, Qatar, Africa & many more countries.

Supply Locations :
Maharashtra , Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli, All over Maharashtra.

MUMBAI CHEMICAL is leading one Largest Supplier, Manufacturer and Exporter of Unipol RX in Maharashtra, Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli.

Product Information:
Unipol RX : RXSOL-20-2057-210
Unipol-RX  is a pH-neutral, liquid concentrated detergent with good cleaning qualities. It contains effective but mild and environmentally safe wetting agents and surfactants that allow rapid penetration to remove fats and oils. Unipol is especially suitable for hydrocarbon freeing of tanks, and is safe on all tank coatings including zinc silicate.

Product Application:
Using Procedure:
The most economical method of using Unipol is by recirculation washing, using tank cleaning machines. Make up a solution of 1-5% in preferably fresh water in the tank and recirculate. Whenever possible, the cleaning solution should be heated to 50-80°C. Rinse off with hot fresh water. Alternatively, hand spray the tank with a 20-50% solution of Unipol and allow it to stay for 30-60 minutes before a final rinse with hot water. When the tank is cleaned to a  water white standard , remove any free water and ventilate until the tank is dry.

Product Note:
Features
Non-caustic, pH neutral.
Solvent free
Non-flammable.
Does not contain nonylphenol ethoxylates or other estrogenic compounds.
Non-corrosive to metals.
Suitable for all tank-coatings.
Can be used for gas and hydrocarbon-freeing of tanks.
Can be used for deodorizing.
Complies with all environmental regulations and the EU Detergent Regulation.
IMO approved and listed in Annex 10 of the MEPC.2/ Circular.

Product Technical Specification:
APPEARANCE: Light yellow liquid
DENSITY, in g/cm3 at 15°C:1.1
FLASH POINT, (PMCC) in °C:N/A
PH, in conc. at 20°C:8-9
PH, in 1% at 20°C:7-8
COMPATIBILITY:
Metal: The product is compatible
With all normally used metals
And their alloys.
Rubber: No known effect.
Synthetic rubber: No known effect.

Available Packing Size: 10 Kg.

MUMBAI CHEMICAL offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical. Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Unipol RX with advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers. Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping a ready stock of Unipol RX and for more information, any support and price, Feel free to contact us through our Email id mumbaichems@gmail.com

We are presently operative in all over India and you can buy our products from various location Like Andhra Pradesh, Tamilnadu, Gujarat , West Bengal  and also all seaports of India. We do have many satisfied customers in this Industries because of our QUALITY, PRICING & SERVICE. Our Company is also a Major Exporter & Mfg of Unipol RX in UAE, Oman , Vietnam, Europe, Africa, Bahrain, Qatar, Africa & many more countries.

Supply Locations :
Maharashtra , Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli, All over Maharashtra.

MUMBAI CHEMICAL is leading one Largest Supplier, Manufacturer and Exporter of RXSOL 666 Tank cleaner in Maharashtra, Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli.

Product Information:
RXSOL 666 Tank cleaner : RXSOL-20-0666-050
RXSOL 666 is surfactant base highly concentrate Product specially designed to clean Tank Container , Cargo Tank which are carrying Heavy Aromatic , hydrocarbon solvent and, natural Latex etc. Rxsol 666 due to strong concentration provides a quick penetration and powerful reaction to remove stubborn hydrocarbons and other organic deposits, from all types of surface. It is an ideal Product to Clean Tank container, cargo Tank , latex Surface etc. .

Product Application:
Using Procedure:
Rxsol 666 is covering 10-12 square meter are when spraying directly. It is advised to use a solution of 2-5% wash water mixed in the tank to be cleaned. Dose rates and results will vary depending on contamination, the temperature of the cleaning solution, and number of tanks to be cleaned with the solution.
Spot  cleaning
Rxsol 666 can be sprayed neat onto tank surfaces to be cleaned. The contact time should be at least 30 minutes. Bulkheads/walls can be washed down by use of tank washing machines or high pressure cleaning machines. The best result is achieved with warm water. Slops should be constantly stripped from the tank and transferred to a holding tank or pumped ashore to slop tanks.
Rock and Roll method (Cargo Tank)
Cleaning of double bottom tanks during voyages.
Flush tank with sea water, stripping constantly.
After flushing, ensure all suction and discharge valves in the engine room are closed.
Dose tank with Rxsol 666 through the sounding pipe or manhole between 0.5 – 1 litre per ton of water, for   75-80% of the tank’s capacity to be cleaned.
Fill the tank to 25% capacity with sea water, raise the temperature up to 60°C and maintain this for 24 hours.
Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
To gas-free, fill the tank with sea water to overflow through vents and sounding pipes, discharge and strip completely.

Product Note:
Features
Highly concentrated tank cleaner with quick penetration properties
The product is biological degradable
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Versatile, can be used for a wide range of applications
Easy to use by any conventional man
Can be used for cleaning and gas-freeing of double bottom, Cargo Tank, Tank Container Etc.
Easy rinse off, leaving clean and oil-free surfaces
Safe to use on most metal surfaces, painted surfaces and tank coatings
Economical, very low dosage rates
Non Flammable
Remove Light Rust and Rust Stain .

Handling and storage
Precautions for safe handling
Wear protective clothing during Tank Cleaning
Avoid contact with  neat skin and eyes
Eyewash bottles should be available
Conditions for safe storage, including any incompatibilities

Product Technical Specification:
Appearance Clear to Pale Yellow Liquid
Odour Charastic
Sp. Gravity 20°C 1.0 to 1.05
Boiling point 100 °C at 760 mm /Hg
Vapour pressure not known
Vapour density not known
Freezing point <0 °C at 760 mm/Hg
solubility Completely soluble in water

Available Packing Size: 50 Kg. Liq.

MUMBAI CHEMICAL offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical. Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of RXSOL 666 Tank cleaner with advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers. Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping a ready stock of RXSOL 666 Tank cleaner and for more information, any support and price, Feel free to contact us through our Email id mumbaichems@gmail.com

We are presently operative in all over India and you can buy our products from various location Like Andhra Pradesh, Tamilnadu, Gujarat , West Bengal  and also all seaports of India. We do have many satisfied customers in this Industries because of our QUALITY, PRICING & SERVICE. Our Company is also a Major Exporter & Mfg of RXSOL 666 Tank cleaner in UAE, Oman , Vietnam, Europe, Africa, Bahrain, Qatar, Africa & many more countries.

Supply Locations :
Maharashtra , Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli, All over Maharashtra.