Universal Cleaner for the Ultrasonic Bath is special formulate for cleaning and degreasing of machines and their components, tools, equipment and parts in industry, handicraft and laboratories. For cleaning of heavily soiled respirators (face masks) and protective work equipment. Universal Cleaner (For the Ultrasonic Bath) has been especially designed for cleaning in ultrasonic cleaning units, as well as for cleaning by immersion, wiping or high pressure techniques. If used properly, a fast and gentle cleaning is achieved.
As the name this is universal cleaner and suitable for claening of equipments, tools, surface etc. Make sure the surface of objects is completely immersed. Hollow objects have to be immersed in a way that air can completely escape from the cavities. Concentration and time of application depend on type and degree of contamination. After cleaning, rinse parts thoroughly with water. For spotless drying, rinse with demineralised water. Respirators (face masks) and protective work equipment have to be cleaned according to the manufacturers specifications.
Application with ultrasound
Dosage: 1 - 5 %
Sonication time: 1 - 10 minutes
Temperature: 20 - 80 °C
Application without ultrasound
Dosage: 1 - 10 %
Immersion time: up to 12 hours
Temperature: 20 - 80 °C
RXSOL ULTRASONIC CLEANER removes oil, removes rust and conditions the surface favorable to the adhesion of paint. It does all these three functions simultaneously. It can be used very effectively on all metals, non-metals, alloys, castings, polymers, plastics, rubber parts, polyester screens nylons, including various components, parts and assemblies of the Textile, Engineering and Automobile Industry. It is a versatile general purpose cleaner. It is very safe to use on all metals& Non-metals.
Wide Range of Ultrasonic Cleaning Solutions from RXSOL
Ultrasonic cleaning solutions can be essential when using an ultrasonic cleaner to achieve your desired results. RXSOL stocks a range of solutions which will cater for a wide range cleaning needs. Following are the cleaning solutions provided by us.
RXSOL-16-3006-025: It removes oil, removes rust and conditions the surface favorable to the adhesion of paint. It does all these three functions simultaneously. It can be used very effectively on all metals, non-metals, alloys, castings, polymers, plastics, rubber parts, polyester screens nylons, including various components, parts and assemblies of the Textile, Engineering and Automobile Industry. It is a versatile general purpose cleaner. It is very safe to use on all metals& Non-metals.
| Product Name | : | RXSOL-16-3036-025 |
| Product Type | : | Ultrasonic Bath Universal Cleaner |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Points: Mumbai, Kandla, Kolkata, Vizag, Chennai, Fujairah, Muscat Oman, Naiorbi Africa, Canada
| Phone | : | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | : | +91 22 2781 1318 :::AOH :0091 9821214367 |
| : | mail@rxmarine.com | |
| Website | : | www.rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Disodiummetasilicate |
2-5% |
6834-92-0 |
229-912-9 |
34,37 |
C |
|
Fatty alcohol ethoxylate |
5-10% |
34398-01-1 |
500-084-3 |
22, 41 |
Xi |
|
Alkylglucoside |
1-5% |
161074-93-7 |
500-529-1 |
41 |
Xi |
|
Sodium Tripolyphosphate |
5 - 15% |
7758-29-4 |
231-838-7 |
36 |
Xi |
| Proprietory blend of Polymer Base | 30-40 | ----------------- | --------- | --------- | ---- |
Sodium Bicarbonate 144-55-8 205-633-8 1044 33 - 43% HAZARD CLASSIFICATION: None RISK PHRASES: None
Sodium (C10 – C16) Alkylbenzene Sulfonate 68081-81-2 268-356-1 Not Listed 10 – 20% HAZARD CLASSIFICATION: None
RISK PHRASES: None
*See Section 16
|
Odour |
Characteristic odour |
|
Appearance |
Liquid, green, soluble in water |
|
Contact with eyes |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract |
|
Contact with skin |
In cases of severe exposure, irritation may develop |
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract |
|
Ingestion |
The ingestion of significant quantities may cause gastro-intestinal disturbances |
|
Contact with skin |
Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water Seek medical advice if necessary. |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes.Obtain immediate medical attention. |
|
Ingestion |
Never give anything by mouth to an unconscious person Give plenty of water to drink.Obtain immediate medical attentio- Remove patient to fresh air Keep warm and at rest, in a half upright position. Loosen clothing Seek medical attention if irritation persists. |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45)n. |
- Smoke from fires is irritating
- Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
|
Personal Precautions |
Wear protective clothing as per section 8 |
|
Environmental Precautions |
No special precautions are required for this product |
|
Immediate Actions |
Shut off source of leak if safe to do so |
|
Clean Up Actions |
Absorb spillage in inert material and shovel up. Flush spill area with copious amounts of water |
|
Special Precautions |
Wear protective clothing as per section 8 |
|
Handling |
The usual precautions for handling chemicals should be observed Eyewash bottles should be available.See Section 8 |
|
Storage |
Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from frostt |
|
Exposure Limits |
There are no recommended or established controls for this product |
|
Exposure controls |
No special ventilation is required unless the product is used in a spray form |
|
Occupational exposure controls |
Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) No respiratory protection is required unless subject to contact with substance mist |
|
Odour |
Characteristic odour |
|
Appearance |
Liquid, custom dye, soluble in water |
|
pH |
10.5 - 11.5 at 5 - 10 % concentration |
|
Boiling point |
100 °C at 760 mm /Hg |
|
Vapour pressure |
not known |
|
Freezing point |
0 °C at 760 mm/Hg |
|
Completely soluble in water |
|
|
Specific gravity (water=1) |
1.03 |
- This article is considered stable under normal conditions
- See Section 5
|
Toxicological information |
No experimental data available |
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract |
|
Contact with skin |
In cases of severe exposure, redness and irritation may develop |
|
Contact with eyes |
Causes irritation |
|
Ingestion |
May cause gastro-intestinal disturbances |
|
Carcinogenicity |
No evidence of carcinogenic effects |
|
Ecotoxicity |
This product does not contain ingredients which are classified in the EU as dangerous for the environment. |
|
Mobility |
Completely soluble in water |
|
Persistence and Biodegradability |
Its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable. |
|
Bioaccumulation Potential |
Bioaccumulation of the components in this product is insignificant. |
|
Other Adverse Effects |
No environmental problems are expected when the product is used / handled correctly. |
|
Classification |
EU Waste class |
|
Disposal Considerations |
Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation |
- Not classified as hazardous for transport
|
Risk Phrases |
Irritating to eyes (R36) |
|
Safety Phrases |
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice (S26).Wear suitable gloves and eye/face protection (S37/39) |
Text of R and S phrase codes used in this safety data sheet:-
R22: Harmful if swallowed;
R34: Causesburns;
R36: Irritating to eyes;
R37: Irritating to respiratory system;
R41: Risk of serious damage to eyes
The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.